Inexpensive Smart Caregiver. Reviews July, 2020, page 5

FallGuard Basic Fall Monitor Bed Pad

Search only Smart Caregiver Corporation brand name

FallGuard Basic Fall Monitor Bed Pad

Current price: 43.95 USD

Saving: $3.95 (8%)


Order at Amazon


Height: 10 Inches

Length: 1.5 Inches

Width: 30 Inches

  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.

More Info

Smart Caregiver® Cordless Monitor with 2 Nurse Call Buttons - Know When They Need Help!

Search only Smart Caregiver Corporation brand name

Smart Caregiver® Cordless Monitor with 2 Nurse Call Buttons - Know When They Need Help!

Current price: 74.95 USD


Order at Amazon


  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons

More Info

Smart Caregiver® Cordless Exit Alarm with Chair Pressure Sensing Pad - Lets you know when they get up without alarming in their room!

Search only Smart Caregiver Corporation brand name

Smart Caregiver® Cordless Exit Alarm with Chair Pressure Sensing Pad - Lets you know when they get up without alarming in their room!

Current price: 119.95 USD


Order at Amazon


  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.

More Info

Replacement 10in x 15in Chair Sensor Pad by Smart Caregiver

Search only Smart Caregiver Corporation brand name

Replacement 10in x 15in Chair Sensor Pad by Smart Caregiver

Current price: 32.95 USD


Order at Amazon


Weight: 0.18 Pounds

  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used

More Info

Basic Pull String Monitor

Search only Smart Caregiver Corporation brand name

Basic Pull String Monitor

Current price: 17.24 USD


Order at Amazon


Height: 5 Inches

Length: 1.5 Inches

Width: 3.5 Inches

Weight: 0.29 Pounds

  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.

More Info

Smart Caregiver Cordless Floor Mat (24" x 36")

Search only Smart Caregiver Corporation brand name

Smart Caregiver Cordless Floor Mat (24

Current price: 139.95 USD


Order at Amazon


Height: 0.25 Inches

Length: 36 Inches

Width: 24.5 Inches

Weight: 5 Pounds

  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.
  • One year manufacturer warranty. After warranty expires, replacement battery/transmitter, model TM-FM, can be purchased separately.
  • Made of durable rubber, with a beveled edge so that it is easy to roll over with a wheelchair and much safer for the caregiver and patient alike.
  • Place the mat beside a bed and be alerted when a person at risk of falls or wandering is getting up. Place by a doorway and you will know when they are exiting a room or building.
  • When pressure is placed on the mat, the compatible alarm being used, (sold separately), will sound to alert for assistance.
  • Cordless/wireless gray floor mat for use with one of Smart Caregiver's cordless/wireless alarm monitors, models 433-EC, 433-CMU, 433-CMU-40/60, or TL-2100G (all sold separately).

More Info

Replacement 10in x 30in Bed Sensor Pad by Smart Caregiver

Search only Smart Caregiver Corporation brand name

Replacement 10in x 30in Bed Sensor Pad by Smart Caregiver

Current price: 39.95 USD


Order at Amazon


  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.
  • One year manufacturer warranty. After warranty expires, replacement battery/transmitter, model TM-FM, can be purchased separately.
  • Made of durable rubber, with a beveled edge so that it is easy to roll over with a wheelchair and much safer for the caregiver and patient alike.
  • Place the mat beside a bed and be alerted when a person at risk of falls or wandering is getting up. Place by a doorway and you will know when they are exiting a room or building.
  • When pressure is placed on the mat, the compatible alarm being used, (sold separately), will sound to alert for assistance.
  • Cordless/wireless gray floor mat for use with one of Smart Caregiver's cordless/wireless alarm monitors, models 433-EC, 433-CMU, 433-CMU-40/60, or TL-2100G (all sold separately).
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used

More Info

AC Power Adapter for Cordless Fall Prevention Exit Alarm

Search only Smart Caregiver Corporation brand name

AC Power Adapter for Cordless Fall Prevention Exit Alarm

Current price: 15.95 USD


Order at Amazon


Height: 2.25 Inches

Length: 2.25 Inches

Width: 1 Inches

Weight: 0.15 Pounds

  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.
  • One year manufacturer warranty. After warranty expires, replacement battery/transmitter, model TM-FM, can be purchased separately.
  • Made of durable rubber, with a beveled edge so that it is easy to roll over with a wheelchair and much safer for the caregiver and patient alike.
  • Place the mat beside a bed and be alerted when a person at risk of falls or wandering is getting up. Place by a doorway and you will know when they are exiting a room or building.
  • When pressure is placed on the mat, the compatible alarm being used, (sold separately), will sound to alert for assistance.
  • Cordless/wireless gray floor mat for use with one of Smart Caregiver's cordless/wireless alarm monitors, models 433-EC, 433-CMU, 433-CMU-40/60, or TL-2100G (all sold separately).
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Use with Smart Caregiver alarms: 433-EC, 433-CMU, 433-MS
  • AC-04 to be used with alarms requireing 12 volt battery / C size batteries
  • Use the AC adapter and save the cost of replacing batteries.

More Info

Smart Caregiver Motion Sensor with Remote Alarm

Search only Smart Caregiver Corporation brand name

Smart Caregiver Motion Sensor with Remote Alarm

Current price: 84.98 USD


Order at Amazon


  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.
  • One year manufacturer warranty. After warranty expires, replacement battery/transmitter, model TM-FM, can be purchased separately.
  • Made of durable rubber, with a beveled edge so that it is easy to roll over with a wheelchair and much safer for the caregiver and patient alike.
  • Place the mat beside a bed and be alerted when a person at risk of falls or wandering is getting up. Place by a doorway and you will know when they are exiting a room or building.
  • When pressure is placed on the mat, the compatible alarm being used, (sold separately), will sound to alert for assistance.
  • Cordless/wireless gray floor mat for use with one of Smart Caregiver's cordless/wireless alarm monitors, models 433-EC, 433-CMU, 433-CMU-40/60, or TL-2100G (all sold separately).
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Use with Smart Caregiver alarms: 433-EC, 433-CMU, 433-MS
  • AC-04 to be used with alarms requireing 12 volt battery / C size batteries
  • Use the AC adapter and save the cost of replacing batteries.
  • Motion sensor requires 3 AA batteries, and remote alarm requires 3 C batteries (not included). Or, purchase with AC Adapter AC-04 (sold separately), which is compatible with both the motion sensor and remote alarm, to use less batteries over the life of this product.
  • Purchase Includes: (1) 433-EC Economy Cordless Fall Monitor and (1) 433-MS Wireless Motion Sensor
  • When the motion sensor is triggered, it sends a signal to a remote alarm which can be up to 100' from the motion sensor - Chime will sound until Alarm Monitor is Reset
  • No alarm noise in the room where the motion sensor is placed -Motion sensor can be mounted to the wall or floor, or simply placed on a surface using the built-in stand

More Info

Smart Caregiver Bed Alarm System - Corded 10" x 30" Weight Sensing Bed Alarm Pad with Bed Exit Alarm Monitor (in-Room), 10 Individual Cleaning Wipes and Liberty Cleaning Cloth

Search only Smart Caregiver Corporation brand name

Smart Caregiver Bed Alarm System - Corded 10

Current price: 54.95 USD


Order at Amazon


  • Monitor requires (1) One 9Volt battery (Not Included) or the AC-02 Adapter (not included)
  • To operate, simply place pad under your patient's back or buttock area, (beneath the lower sheet) and alarm will sound as they sit up and before they put their feet on the ground. Pads are made of a soft vinyl, with foam interior, and are sealed for incontinence protection.
  • To silence the bed exit alarm, simply press the reset button located on the side of the alarm.
  • Volume control is located on Bed Alarm. The bed pad should be placed below lower sheet either across the center back area or the buttocks. Cord from pad runs along the side of the mattress and securely connects to the bed monitor which can be attached to the bed or wall or it can be placed in a convenient location nearby.
  • Caregiver Alarms offer an efficient method of monitoring when a patient is getting up from a bed.
  • Monitor has high, medium, and low volume features. Monitor works 3 C size batteries (not included) or AC-04 adapter (not included)
  • Nurse Call Buttons can be worn around neck with a lanyard or placed on the wall with included cradle. Works with one 12volt battery (included)
  • Includes one (1) 433-EC monitor and two (2) 433-NC nurse call buttons
  • System uses 3 C size batteries (Included)
  • Place the cordless chair sensor pad under the patient on the chair and the alarm will sound when the resident is lifting out of the chair. The alarm will sound continuous after weight is removed from the pad.
  • System includes One Monitor and One 10in x 15in Pressure Sensing Chair Pad
  • Easy to use and effective caregiver alarm. Use this product for fall prevention; know when someone is getting out of a chair unattended.
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Alarm requires one 9 volt battery, not included.
  • Alarm features include 36" string with locking metal garment clip, magnetic connection, low and high volume adjustment, low battery light, and metal clip fixed to the back of the alarm for secure placement.
  • For use in a chair, place the alarm on the back of the chair and attach the locking garment clip to the resident. When the resident moves further then the string is set, the magnet will be pulled free from the alarm and it will sound continuous until the caregiver re-attaches the magnet to the alarm.
  • Pull-String Fall Prevention / Mobility Monitoring Alarm with Magnet.
  • One year manufacturer warranty. After warranty expires, replacement battery/transmitter, model TM-FM, can be purchased separately.
  • Made of durable rubber, with a beveled edge so that it is easy to roll over with a wheelchair and much safer for the caregiver and patient alike.
  • Place the mat beside a bed and be alerted when a person at risk of falls or wandering is getting up. Place by a doorway and you will know when they are exiting a room or building.
  • When pressure is placed on the mat, the compatible alarm being used, (sold separately), will sound to alert for assistance.
  • Cordless/wireless gray floor mat for use with one of Smart Caregiver's cordless/wireless alarm monitors, models 433-EC, 433-CMU, 433-CMU-40/60, or TL-2100G (all sold separately).
  • Can be used as a replacement pad for the TL-2016 monitor
  • Can be used as a replacement pad for the TL-2100S monitor
  • Can be used as a replacement pad for the TL-2100E monitor
  • Can be used as a replacement pad for the TL-2100B monitor
  • This 1 year life replacement pad must have an existing monitor in order to be used
  • Use with Smart Caregiver alarms: 433-EC, 433-CMU, 433-MS
  • AC-04 to be used with alarms requireing 12 volt battery / C size batteries
  • Use the AC adapter and save the cost of replacing batteries.
  • Motion sensor requires 3 AA batteries, and remote alarm requires 3 C batteries (not included). Or, purchase with AC Adapter AC-04 (sold separately), which is compatible with both the motion sensor and remote alarm, to use less batteries over the life of this product.
  • Purchase Includes: (1) 433-EC Economy Cordless Fall Monitor and (1) 433-MS Wireless Motion Sensor
  • When the motion sensor is triggered, it sends a signal to a remote alarm which can be up to 100' from the motion sensor - Chime will sound until Alarm Monitor is Reset
  • No alarm noise in the room where the motion sensor is placed -Motion sensor can be mounted to the wall or floor, or simply placed on a surface using the built-in stand
  • PURCHASE INCLUDES – Bed Exit Alarm Monitor (TL-2100B), 10” x 30” Corded Bed Sensor Alarm Pad (BPB-RI), 10 Individual AudioWipes, and Liberty Microfiber Cloth
  • "REPLACEABLE CORDS - Unique, SafeTRelease Cord separates instead of breaking or pulling cord away from pad. No more replacing sensor pads due to broken cords (cords can be replaced if broken). Unique SafeTRelease cord guaranteed for life of pad. "
  • AUTO-RESET BEDSIDE ALARM - Monitor can be placed at the bedside and connected to the corded sensor pad. When the resident gets up and pressure is removed from the pad, the monitor will sound alerting the caregiver. When pressure is re-applied to the pad, the monitor will automatically silence and reset for use. Requires one 9v battery, or optional AC adapter model AC-02 (9 volt) (both not included in purchase)
  • CORDED BED SENSOR ALARM PAD - Includes a corded 10" x 30" bed alarm sensor pad.The bed alarm pad is sealed and impervious to fluids. This weight-sensitive pressure pad is for fall prevention bed alarm monitors use. Bed pad is powered by a sealed battery for incontinence protection and has a 1 year lifespan.
  • FALL AND WANDERING PREVENTION - This effective caregiver system will alert caregivers when a patient gets off their bed. These weight-sensitive pressure pads are for fall prevention bed alarm monitors use. When connected, the bed pad will trigger the fall prevention alarm if the resident moves off the pad. Easy to install and use!

More Info

1    2    3    4    5    6    7    8    9    10