Best ridgid saw saw. Leecraft brand. New releases 2021

LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert

More from Tools & Home Improvement
Search only Leecraft brand name
LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert

Current price: 45.98 USD


Check price and availability


Height: 0.9 Inches

Length: 15.25 Inches

Width: 3.75 Inches

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771

More Info

Leecraft RG-4 Table Saw Zero-Clearance Dado Insert for RIDGID R4510 (Colors May Vary)

More from Tools & Home Improvement
Search only Leecraft brand name
Leecraft RG-4 Table Saw Zero-Clearance Dado Insert for RIDGID R4510 (Colors May Vary)

Current price: 29.95 USD


Check price and availability


Height: 1.2 Inches

Length: 4.75 Inches

Width: 14.75 Inches

Weight: 1.05 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4

More Info

Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

More from Tools & Home Improvement
Search only Leecraft brand name
Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

Current price: 42.99 USD


Check price and availability


Height: 1 Inches

Length: 14 Inches

Width: 3.8 Inches

Weight: 1.22 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts

More Info

LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert

More from Tools & Home Improvement
Search only Leecraft brand name
LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert

Current price: 40.98 USD


Check price and availability


Height: 1.1 Inches

Length: 15.5 Inches

Width: 4.7 Inches

Weight: 1.04 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts
  • Coated surface for friction free operation
  • Durable phenolic construction
  • Zero-Clearance dado insert with no riving knife slot
  • Fits RIDGID R4512 Professional Table Saw
  • 15-1/8" x 3-3/4" x 1/8"

More Info

Leecraft PM-1 Zero Clearance Table Saw Insert (For Powermatic Model 66)

More from Tools & Home Improvement
Search only Leecraft brand name
Leecraft PM-1 Zero Clearance Table Saw Insert (For Powermatic Model 66)

Current price: 34.95 USD


Check price and availability


Height: 0.5 Inches

Length: 14.44 Inches

Width: 4 Inches

Weight: 1.3 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts
  • Coated surface for friction free operation
  • Durable phenolic construction
  • Zero-Clearance dado insert with no riving knife slot
  • Fits RIDGID R4512 Professional Table Saw
  • 15-1/8" x 3-3/4" x 1/8"
  • Reduces saw noise
  • Kerf serves as handy stock alignment guide
  • Reduces sawdust expelled
  • Reduced chip-out and splintering
  • Supports work right up to the blade

More Info

Leecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1, 2400LS and 2410LS (Colors May Vary)

More from Tools & Home Improvement
Search only Leecraft brand name
Leecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1, 2400LS and 2410LS (Colors May Vary)

Current price: 33.95 USD


Check price and availability


Height: 0.9 Inches

Length: 14.1 Inches

Width: 4.75 Inches

Weight: 1.12 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts
  • Coated surface for friction free operation
  • Durable phenolic construction
  • Zero-Clearance dado insert with no riving knife slot
  • Fits RIDGID R4512 Professional Table Saw
  • 15-1/8" x 3-3/4" x 1/8"
  • Reduces saw noise
  • Kerf serves as handy stock alignment guide
  • Reduces sawdust expelled
  • Reduced chip-out and splintering
  • Supports work right up to the blade
  • Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS.
  • High density phenolic laminate
  • Frictionless
  • 1/2" thick

More Info

Leecraft DW-3 Zero-Clearance Dado Table Saw Insert for Dewalt Saws (Colors May Vary)

More from Tools & Home Improvement
Search only Leecraft brand name
Leecraft DW-3 Zero-Clearance Dado Table Saw Insert for Dewalt Saws (Colors May Vary)

Current price: 33.29 USD

Saving: $1.66 (5%)


Check price and availability


  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts
  • Coated surface for friction free operation
  • Durable phenolic construction
  • Zero-Clearance dado insert with no riving knife slot
  • Fits RIDGID R4512 Professional Table Saw
  • 15-1/8" x 3-3/4" x 1/8"
  • Reduces saw noise
  • Kerf serves as handy stock alignment guide
  • Reduces sawdust expelled
  • Reduced chip-out and splintering
  • Supports work right up to the blade
  • Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS.
  • High density phenolic laminate
  • Frictionless
  • 1/2" thick
  • Factory splitter/guard incompatible with DW-3 insert and will need to be lowered or removed
  • Measures: 13-9/16" x 3-3/4" x 29/64" (Please measure before ordering) instructions included
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Insert is cut with dado blade or regular blade to create a perfectly matched insert.
  • Fits DeWalt: DW744, DW745, DW746, DeWalt, DWE7480, DWE7490X, DWE7491RS, DWE7499GD Table Saws

More Info

Steel City Deluxe Blade Insert

More from Tools & Home Improvement
Search only Leecraft brand name
Steel City Deluxe Blade Insert

Current price: 28.95 USD


Check price and availability


Height: 0.5 Inches

Length: 14.8 Inches

Width: 4.4 Inches

Weight: 1 Pounds

  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 15-1/8" x 3-3/4" x 1/8" (Please measure before ordering)
  • Fits: RIDGID R4512, Grizzly G0771
  • Installation instructions included
  • Precision machined from melamine faced high density phenolic laminate
  • 14" x 3-3/4" x 3/8" thick without riving knife slot
  • Fits Ridgid R4510 jobsite saw for use with dado sets
  • Leecraft Model Number RG-4
  • Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
  • Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Table saw insert supports work right up to the blade for smooth, more precise cuts
  • Coated surface for friction free operation
  • Durable phenolic construction
  • Zero-Clearance dado insert with no riving knife slot
  • Fits RIDGID R4512 Professional Table Saw
  • 15-1/8" x 3-3/4" x 1/8"
  • Reduces saw noise
  • Kerf serves as handy stock alignment guide
  • Reduces sawdust expelled
  • Reduced chip-out and splintering
  • Supports work right up to the blade
  • Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS.
  • High density phenolic laminate
  • Frictionless
  • 1/2" thick
  • Factory splitter/guard incompatible with DW-3 insert and will need to be lowered or removed
  • Measures: 13-9/16" x 3-3/4" x 29/64" (Please measure before ordering) instructions included
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Insert is cut with dado blade or regular blade to create a perfectly matched insert.
  • Fits DeWalt: DW744, DW745, DW746, DeWalt, DWE7480, DWE7490X, DWE7491RS, DWE7499GD Table Saws
  • Installation instructions included
  • Eliminates dangerous gap around blade where thin off-cuts can get wedged
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Measures: 14-11/16" x 3-3/4" x 1/2" (Please measure before ordering)
  • Fits: Steel City 10" Riving Knife Cabinet Saw Model #35900 Series, RIDGID R4511, Sears Craftsman 351.221160

More Info

1