Best oregon bar mount chainsaw sharpener. Reviews August, 2021

Oregon 520-120 Bench Mount Chain Grinder

Search only Oregon brand name
Oregon 520-120 Bench Mount Chain Grinder

Current price: 339.99 USD


Check price and availability


Height: 10.3 Inches

Length: 15.4 Inches

Width: 11.85 Inches

Weight: 19.55 Pounds

  • Power source type: Corded Electric

More Info

Oregon 575214 Sure Sharp 12V Handheld Chainsaw Chain Sharpener/Grinder, red

Search only Oregon brand name
Oregon 575214 Sure Sharp 12V Handheld Chainsaw Chain Sharpener/Grinder, red

Current price: 30.48 USD


Check price and availability


Height: 2.5 Inches

Length: 5.6 Inches

Width: 10.2 Inches

Weight: 1 Pounds

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere

More Info

Oregon 28840 5/32-Inch Chainsaw Replacement Sharpening Stone

Search only Oregon brand name
Oregon 28840 5/32-Inch Chainsaw Replacement Sharpening Stone

Current price: 5.49 USD


Check price and availability


Height: 4.75 Inches

Length: 0.25 Inches

Width: 2.88 Inches

Weight: 0.02 Pounds

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones

More Info

FORESTER Chainsaw Apron Chaps with Pocket, Orange 37 Length with Adjustable Belt

Search only FORESTER brand name
FORESTER Chainsaw Apron Chaps with Pocket, Orange 37 Length with Adjustable Belt

Current price: 49.88 USD


Check price and availability


Height: 2.5 Inches

Length: 9 Inches

Width: 13 Inches

Weight: 1.28 Pounds

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.

More Info

LEGENDARY-YES Electric Grinder Chain Saw Bench Sharpener Vise Mount W/Grind Chainsaw Wheel

Search only LEGENDARY-YES brand name
LEGENDARY-YES Electric Grinder Chain Saw Bench Sharpener Vise Mount W/Grind Chainsaw Wheel

Current price: 44.48 USD

Saving: $2.51 (5%)


Check price and availability


  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener

More Info

Oregon 105671 20-Inch Replacement Chainsaw Bar and Chain Combo For Stihl

Search only Oregon brand name
Oregon 105671 20-Inch Replacement Chainsaw Bar and Chain Combo For Stihl

Current price: 37.38 USD


Check price and availability


Height: 5 Inches

Length: 29 Inches

Width: 0.25 Inches

Weight: 3.38 Pounds

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • Pitch: .325", Gauge: .063", chain drive link count: 81
  • For saw sizes up to 62 cc. No narrow kerf
  • Lubritec system keeps your chain and guide bar oiled for less friction and longer life
  • Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290

More Info

BANBLUE Chainsaw Sharpener, Portable Chain Saw Blade Teeth Sharpener Fast Sharpening Stone Grinder Tools Suitable for 14/16/18/20 Inch Two Holes Chain Saw Bar (5 pcs Extra Whetstones)

Search only BANBLUE brand name
BANBLUE Chainsaw Sharpener, Portable Chain Saw Blade Teeth Sharpener Fast Sharpening Stone Grinder Tools Suitable for 14/16/18/20 Inch Two Holes Chain Saw Bar (5 pcs Extra Whetstones)

Current price: 9.99 USD


Check price and availability


  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • Pitch: .325", Gauge: .063", chain drive link count: 81
  • For saw sizes up to 62 cc. No narrow kerf
  • Lubritec system keeps your chain and guide bar oiled for less friction and longer life
  • Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290
  • 【Package Include】: 1x chainsaw chain sharpener comes with 5 extra whetstone. And please notice: the whetstone is detachable. In case the whetstone is loose after opening the package, please don’t worry, this is normal, very easy for you to re-install it.
  • 【Enjoy Your Woodworking Life】: This chain saw blade sharpener is lightweight and portable, easy to use outdoors. The new chainsaw teeth sharpener provide a simple and fast saw chain sharpening method, protecting your hands from injury. It is the most practical tool and best gift for your father or husband to increase productivity.
  • 【Easy to Install】: Your hands don't need to touch the whetstone, Just attach the chainsaw on the two holes of the sharpener. Then close and lock the sharpener. Finally, gengly squeeze the chainsaw. Your chain saw will become sharp after 3-5 seconds. Keep oil on the chain and rails to reduce friction and extend service life.
  • 【Intimate & Perfect Design】 - The chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it. The distance between these 2 pins (holes) is about 0.7-1.3inch.
  • 【Broad Compatibility】 - Chainsaw sharpener is made of high-quality plastic & durable whetstone, this lightweight and durable chain saw blade is suitable for most 14" / 16" / 18" / 20" chains (Note: not compatible with ECHO 16 chain saw)

More Info

Oregon 25896 3/16 inch Chainsaw Chain File Guide with File , grey

Search only Oregon brand name
Oregon 25896 3/16 inch Chainsaw Chain File Guide with File , grey

Current price: 8.39 USD

Saving: $2.60 (24%)


Check price and availability


Height: 1.4 Inches

Length: 3.55 Inches

Width: 11.95 Inches

Weight: 0.220462262 Pounds

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • Pitch: .325", Gauge: .063", chain drive link count: 81
  • For saw sizes up to 62 cc. No narrow kerf
  • Lubritec system keeps your chain and guide bar oiled for less friction and longer life
  • Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290
  • 【Package Include】: 1x chainsaw chain sharpener comes with 5 extra whetstone. And please notice: the whetstone is detachable. In case the whetstone is loose after opening the package, please don’t worry, this is normal, very easy for you to re-install it.
  • 【Enjoy Your Woodworking Life】: This chain saw blade sharpener is lightweight and portable, easy to use outdoors. The new chainsaw teeth sharpener provide a simple and fast saw chain sharpening method, protecting your hands from injury. It is the most practical tool and best gift for your father or husband to increase productivity.
  • 【Easy to Install】: Your hands don't need to touch the whetstone, Just attach the chainsaw on the two holes of the sharpener. Then close and lock the sharpener. Finally, gengly squeeze the chainsaw. Your chain saw will become sharp after 3-5 seconds. Keep oil on the chain and rails to reduce friction and extend service life.
  • 【Intimate & Perfect Design】 - The chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it. The distance between these 2 pins (holes) is about 0.7-1.3inch.
  • 【Broad Compatibility】 - Chainsaw sharpener is made of high-quality plastic & durable whetstone, this lightweight and durable chain saw blade is suitable for most 14" / 16" / 18" / 20" chains (Note: not compatible with ECHO 16 chain saw)
  • Guide with angle indicators to maintain file position
  • Eliminates guesswork, keeps chain at peak cutting efficiency
  • 3/16 inches
  • Lines on the file guide's frame make it easy to align the file consistently and correctly
  • File guide grips file securely and keeps file at the correct depth

More Info

Oregon 5/32-Inch Chain Saw Sharpening Kit 38276

Search only Oregon brand name
Oregon 5/32-Inch Chain Saw Sharpening Kit 38276

Current price: 24.07 USD

Saving: $1.72 (7%)


Check price and availability


Height: 1.45 Inches

Length: 6.05 Inches

Width: 12 Inches

Weight: 11.04 ounces

Warranty: Defects in material and workmanship

  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • Pitch: .325", Gauge: .063", chain drive link count: 81
  • For saw sizes up to 62 cc. No narrow kerf
  • Lubritec system keeps your chain and guide bar oiled for less friction and longer life
  • Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290
  • 【Package Include】: 1x chainsaw chain sharpener comes with 5 extra whetstone. And please notice: the whetstone is detachable. In case the whetstone is loose after opening the package, please don’t worry, this is normal, very easy for you to re-install it.
  • 【Enjoy Your Woodworking Life】: This chain saw blade sharpener is lightweight and portable, easy to use outdoors. The new chainsaw teeth sharpener provide a simple and fast saw chain sharpening method, protecting your hands from injury. It is the most practical tool and best gift for your father or husband to increase productivity.
  • 【Easy to Install】: Your hands don't need to touch the whetstone, Just attach the chainsaw on the two holes of the sharpener. Then close and lock the sharpener. Finally, gengly squeeze the chainsaw. Your chain saw will become sharp after 3-5 seconds. Keep oil on the chain and rails to reduce friction and extend service life.
  • 【Intimate & Perfect Design】 - The chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it. The distance between these 2 pins (holes) is about 0.7-1.3inch.
  • 【Broad Compatibility】 - Chainsaw sharpener is made of high-quality plastic & durable whetstone, this lightweight and durable chain saw blade is suitable for most 14" / 16" / 18" / 20" chains (Note: not compatible with ECHO 16 chain saw)
  • Guide with angle indicators to maintain file position
  • Eliminates guesswork, keeps chain at peak cutting efficiency
  • 3/16 inches
  • Lines on the file guide's frame make it easy to align the file consistently and correctly
  • File guide grips file securely and keeps file at the correct depth
  • File Diameter - 5/32-inch
  • .025-inch drop-center depth gauge tool
  • 1 round and 1 flat file
  • 2 wooden file handles
  • 1 assembled file frame

More Info

Areyourshop 𝐂𝐡𝐚𝐢𝐧𝐬𝐚𝐰 𝐒𝐡𝐚𝐫𝐩𝐞𝐧𝐞𝐫, Sharpening Stone Grinder Tools Suitable for 𝟏𝟔/𝟏𝟖/𝟐𝟎 𝐈𝐧𝐜𝐡 One/Two Holes Chain Saw Bar-Portable Chain Saw Blade Teeth Sharpener Fast

Search only Areyourshop brand name
Areyourshop 𝐂𝐡𝐚𝐢𝐧𝐬𝐚𝐰 𝐒𝐡𝐚𝐫𝐩𝐞𝐧𝐞𝐫, Sharpening Stone Grinder Tools Suitable for 𝟏𝟔/𝟏𝟖/𝟐𝟎 𝐈𝐧𝐜𝐡 One/Two Holes Chain Saw Bar-Portable Chain Saw Blade Teeth Sharpener Fast

Current price: 11.59 USD


Check price and availability


  • Power source type: Corded Electric
  • Powerful motor runs at optimum 25,000 RPM
  • Sharpens most chainsaw chains up to .404" pitch
  • Simple sharpening angle adjustment guide for accuracy
  • Includes one each 5/32"(4.0mm), 3/16" (4.8mm) and 7/32" (5.5mm) sharpening stones and a collet wrench
  • Includes both a 12-Volt car adapter and battery clips, so you can conveniently sharpen your chainsaw chain anywhere
  • Ideal for sharpening chain saw teeth
  • 5/32 inches
  • Carded
  • These stones leave an excellent cutting edge on saw chain and are easily replaced on most electric chain sharpeners
  • Use with Oregon electric sure sharp handheld grinder to easily sharpen your saw chain
  • Includes three 5/32" (4.0 mm) replacement shapening stones
  • These chaps are not designed to protection against electric chainsaws due to the high-torque nature of electric motors.
  • Comfortable Design - Lightweight, Adjustable Waist, Pocketed
  • Meets ASTM F1897 standard specifications for leg protection for chainsaw users ASTM F1897-2008 39JY
  • Meets the leg protection requirements for OSHA 1910.266 standards for chainsaw operators.
  • Forester Chain Saw Chaps are a protective leg garment designed to reduce the risk of severity of injury to body parts covered by pads, should they come in contact with a rotating saw. They are made with an oil And water resistant oxford outer.
  • Bench Sharpener
  • Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012; Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
  • Pitch: .325", Gauge: .063", chain drive link count: 81
  • For saw sizes up to 62 cc. No narrow kerf
  • Lubritec system keeps your chain and guide bar oiled for less friction and longer life
  • Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290
  • 【Package Include】: 1x chainsaw chain sharpener comes with 5 extra whetstone. And please notice: the whetstone is detachable. In case the whetstone is loose after opening the package, please don’t worry, this is normal, very easy for you to re-install it.
  • 【Enjoy Your Woodworking Life】: This chain saw blade sharpener is lightweight and portable, easy to use outdoors. The new chainsaw teeth sharpener provide a simple and fast saw chain sharpening method, protecting your hands from injury. It is the most practical tool and best gift for your father or husband to increase productivity.
  • 【Easy to Install】: Your hands don't need to touch the whetstone, Just attach the chainsaw on the two holes of the sharpener. Then close and lock the sharpener. Finally, gengly squeeze the chainsaw. Your chain saw will become sharp after 3-5 seconds. Keep oil on the chain and rails to reduce friction and extend service life.
  • 【Intimate & Perfect Design】 - The chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it. The distance between these 2 pins (holes) is about 0.7-1.3inch.
  • 【Broad Compatibility】 - Chainsaw sharpener is made of high-quality plastic & durable whetstone, this lightweight and durable chain saw blade is suitable for most 14" / 16" / 18" / 20" chains (Note: not compatible with ECHO 16 chain saw)
  • Guide with angle indicators to maintain file position
  • Eliminates guesswork, keeps chain at peak cutting efficiency
  • 3/16 inches
  • Lines on the file guide's frame make it easy to align the file consistently and correctly
  • File guide grips file securely and keeps file at the correct depth
  • File Diameter - 5/32-inch
  • .025-inch drop-center depth gauge tool
  • 1 round and 1 flat file
  • 2 wooden file handles
  • 1 assembled file frame
  • 【𝐒𝐇𝐈𝐏𝐏𝐈𝐍𝐆】𝐓𝐡𝐢𝐬 𝐢𝐭𝐞𝐦 𝐰𝐢𝐥𝐥 𝐬𝐡𝐢𝐩 𝐟𝐫𝐨𝐦 𝐔𝐒𝐀, 𝐝𝐞𝐥𝐢𝐯𝐞𝐫𝐲 𝐭𝐢𝐦𝐞 𝐧𝐞𝐞𝐝 𝐚𝐛𝐨𝐮𝐭 𝟓-𝟖 𝐝𝐚𝐲𝐬.
  • 【𝐂𝐨𝐧𝐯𝐞𝐧𝐢𝐞𝐧𝐭 & 𝐅𝐚𝐬𝐭 𝐒𝐡𝐚𝐫𝐩𝐞𝐧𝐢𝐧𝐠】 - The new chainsaw teeth sharpener provides a simple and fast method of sharpening the saw chain. The chainsaw can make the dull chain clear again in just 3-5 seconds. Lightweight and easy to carry, the chain saw sharpening tool is easy to use outdoors, protecting your hands from injury.
  • 【𝐄𝐚𝐬𝐲 𝐓𝐨 𝐔𝐬𝐞】Check your chainsaw blade whether have two holes. If your saw blade is single-hole, you can remove the sliding cylinder on sharpener, then install and use. Remember to fix and tighten the black screws before sharpening the knife.
  • 【𝐏𝐞𝐫𝐟𝐞𝐜𝐭 𝐃𝐞𝐬𝐢𝐠𝐧】The chainsaw sharpener is designed with 2 holes, for fixing the sharpening knife, one hole is fixed, the other is move back and forth and take it down, very flexible, suitable for 16",18",20", and suitable for one or two hole chain saw. The black bottom is elastic and adjusts the distance of the sharpener.(𝐍𝐨𝐭 𝐬𝐮𝐢𝐭𝐚𝐛𝐥𝐞 𝐟𝐨𝐫 𝐄𝐂𝐇𝐎 𝟏𝟔" 𝐚𝐧𝐝 𝐇𝐮𝐬𝐪𝐯𝐚𝐫𝐧𝐚 𝟒𝟓𝟓 𝟐𝟎" 𝐜𝐡𝐚𝐢𝐧𝐬𝐚𝐰)
  • 【𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬】 - Made of premium 𝐀𝐁𝐒 𝐩𝐥𝐚𝐬𝐭𝐢𝐜, this lightweight and durable chain saw blade is suitable for most / 16" / 18" / 20" chains on the market.

More Info

1    2