Good jigsaw wood cutter. Reviews September, 2021, page 8

Bosch T-Shank Multi-Purpose Jigsaw Blades, 10 Piece, Assorted, Jig Saw Blade Set for Cutting Wood and Metal (T5002)

More from Tools & Home Improvement
Search only BOSCH brand name
Bosch T-Shank Multi-Purpose Jigsaw Blades, 10 Piece, Assorted, Jig Saw Blade Set for Cutting Wood and Metal (T5002)

Current price: 12.98 USD

Saving: $4.92 (27%)


Check price and availability


Weight: 0.07 Pounds

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set

More Info

Mini Circular Saw, TECCPO 4.8Amp, Compact Circular Saw, Laser Guide, Hand Saw, 3700 RPM, 3-5/16” Circular Saw, Scale Ruler, Pure Copper Motor, Ideal for Wood, Soft Metal, Tile & Plastic Cuts - TAPS22P

More from Tools & Home Improvement
Search only TECCPO brand name
Mini Circular Saw, TECCPO 4.8Amp, Compact Circular Saw, Laser Guide, Hand Saw, 3700 RPM, 3-5/16” Circular Saw, Scale Ruler, Pure Copper Motor, Ideal for Wood, Soft Metal, Tile & Plastic Cuts - TAPS22P

Current price: 67.99 USD


Check price and availability


Height: 3.54 Inches

Length: 15.74 Inches

Width: 4.72 Inches

Weight: 5.25 Pounds

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.

More Info

WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

More from Tools & Home Improvement
Search only WEN brand name
WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Current price: 127.12 USD


Check price and availability


Height: 14.75 Inches

Length: 26.38 Inches

Width: 13 Inches

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

More Info

GARTOL Miter Shears- Multifunctional Trunking Shears for Angular Cutting of Moulding and Trim, Adjustable at 45 To 135 Degree, Hand Tools for Cutting Soft Wood, Plastic, PVC, with Replacement blades

More from Tools & Home Improvement
Search only GARTOL brand name
GARTOL Miter Shears- Multifunctional Trunking Shears for Angular Cutting of Moulding and Trim, Adjustable at 45 To 135 Degree, Hand Tools for Cutting Soft Wood, Plastic, PVC, with Replacement blades

Current price: 28.99 USD

Saving: $4.00 (12%)


Check price and availability


Height: 1.8 Inches

Length: 9.5 Inches

Width: 2.5 Inches

Weight: 0.73 Pounds

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.

More Info

MicroLux Mini Miter/Cut-Off Saw

More from Tools & Home Improvement
Search only MICRO-MAKE brand name
MicroLux Mini Miter/Cut-Off Saw

Current price: 64.95 USD


Check price and availability


Height: 5 Inches

Length: 10 Inches

Width: 7 Inches

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic

More Info

Festool 497443 Circle Cutter Set for Carvex Jigsaw

More from Tools & Home Improvement
Search only Festool brand name
Festool 497443 Circle Cutter Set for Carvex Jigsaw

Current price: 75 USD


Check price and availability


Height: 5 Inches

Length: 10 Inches

Width: 5 Inches

Weight: 0.9038952742 Pounds

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic
  • Works with all Festool Carvex Jigsaw models
  • Base adapts the jigsaw to Festool's guide rails for straight cuts
  • Circle cutter rolls up for compact storage when not in use
  • Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
  • Attaches tool-free to jigsaw

More Info

Intpro 40 Oscillating Tool Saw Blades Universal Wood Multitool Blade Quick Release Fits Porter Cable Black & Decker Rockwell Ridgid Ryobi Milwaukee DeWalt Chicago Craftsman

More from Tools & Home Improvement
Search only Intpro brand name
Intpro 40 Oscillating Tool Saw Blades Universal Wood Multitool Blade Quick Release Fits Porter Cable Black & Decker Rockwell Ridgid Ryobi Milwaukee DeWalt Chicago Craftsman

Current price: 27.99 USD


Check price and availability


  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic
  • Works with all Festool Carvex Jigsaw models
  • Base adapts the jigsaw to Festool's guide rails for straight cuts
  • Circle cutter rolls up for compact storage when not in use
  • Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
  • Attaches tool-free to jigsaw
  • 🛠NOTICE:Do not fit on Fein Starlock,Bosch MX30EC-31 and Bosch Quick Release tools, Fein Supercut, Worx; The following model devices need to be used with the C-clip adapter Dremel MM40 / MM45, Bosch MX30E / MXH180B
  • 🛠Special Design for Precision cutting: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure you can get accurate cuts easy and fast while you working with it.
  • 🛠Universal Compatible Tools: Our quick release saw blades are compatible with many oscillating tools in the market, such as Black&Decker, Craftsman, Chicago Electric, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More.
  • 🛠Oscillating Saw Blades Kit: 40 pcs saw blades. Standard tooth and made of high quality metal. Ideal for sawing, scraping, shaping, polishing and wood, metal, plastic cutting, which could be used for workshop ,household or other place.
  • 🛠Tougher&Saving Your Money: Intpro oscillating multitool blades are made of high speed steel and high carbon steel. Thick gauge metal and high quality manufacturing technology ensure excellent wear resistance.Same quality but price lower than ‘D’ brand or others.

More Info

60PCS T Shank Jigsaw Blades Set for Wood Plastic Metal Replace Bosch DEWALT Black+Decker TACKLIFE Makita SKIL Porter Cable and Rockwell BladeRunner X2 Jig Saws Includes 3 Type of T118A T144D & T244D

More from Tools & Home Improvement
Search only Cozzmts brand name
60PCS T Shank Jigsaw Blades Set for Wood Plastic Metal Replace Bosch DEWALT Black+Decker TACKLIFE Makita SKIL Porter Cable and Rockwell BladeRunner X2 Jig Saws Includes 3 Type of T118A T144D & T244D

Current price: 23.58 USD


Check price and availability


Height: 1.574803148 Inches

Length: 8.661417314 Inches

Width: 6.692913379 Inches

Weight: 10.8 ounces

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic
  • Works with all Festool Carvex Jigsaw models
  • Base adapts the jigsaw to Festool's guide rails for straight cuts
  • Circle cutter rolls up for compact storage when not in use
  • Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
  • Attaches tool-free to jigsaw
  • 🛠NOTICE:Do not fit on Fein Starlock,Bosch MX30EC-31 and Bosch Quick Release tools, Fein Supercut, Worx; The following model devices need to be used with the C-clip adapter Dremel MM40 / MM45, Bosch MX30E / MXH180B
  • 🛠Special Design for Precision cutting: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure you can get accurate cuts easy and fast while you working with it.
  • 🛠Universal Compatible Tools: Our quick release saw blades are compatible with many oscillating tools in the market, such as Black&Decker, Craftsman, Chicago Electric, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More.
  • 🛠Oscillating Saw Blades Kit: 40 pcs saw blades. Standard tooth and made of high quality metal. Ideal for sawing, scraping, shaping, polishing and wood, metal, plastic cutting, which could be used for workshop ,household or other place.
  • 🛠Tougher&Saving Your Money: Intpro oscillating multitool blades are made of high speed steel and high carbon steel. Thick gauge metal and high quality manufacturing technology ensure excellent wear resistance.Same quality but price lower than ‘D’ brand or others.
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • PERFECT ACCURACY -- T144D T244D & T118A, They provide efficiency for Curved Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, OSB, Plywood, Thin Sheet Metal Steel, Aluminum and more.
  • SUPERIOR VALUE -- Why pay $1-$3 per blade? Our saw blades match & exceed name-brand quality at a fraction of the price. 60 Piece Contractor Jigsaw Blades Set. Meet your everyday needs.

More Info

Dremel 678-01 Circle Cutter and Straight Edge Guide , Silver

More from Tools & Home Improvement
Search only Dremel brand name
Dremel 678-01 Circle Cutter and Straight Edge Guide , Silver

Current price: 13.99 USD


Check price and availability


Height: 8.4 Inches

Length: 3.45 Inches

Width: 5.1 Inches

Weight: 0.35 Pounds

Warranty: 2 Years

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic
  • Works with all Festool Carvex Jigsaw models
  • Base adapts the jigsaw to Festool's guide rails for straight cuts
  • Circle cutter rolls up for compact storage when not in use
  • Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
  • Attaches tool-free to jigsaw
  • 🛠NOTICE:Do not fit on Fein Starlock,Bosch MX30EC-31 and Bosch Quick Release tools, Fein Supercut, Worx; The following model devices need to be used with the C-clip adapter Dremel MM40 / MM45, Bosch MX30E / MXH180B
  • 🛠Special Design for Precision cutting: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure you can get accurate cuts easy and fast while you working with it.
  • 🛠Universal Compatible Tools: Our quick release saw blades are compatible with many oscillating tools in the market, such as Black&Decker, Craftsman, Chicago Electric, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More.
  • 🛠Oscillating Saw Blades Kit: 40 pcs saw blades. Standard tooth and made of high quality metal. Ideal for sawing, scraping, shaping, polishing and wood, metal, plastic cutting, which could be used for workshop ,household or other place.
  • 🛠Tougher&Saving Your Money: Intpro oscillating multitool blades are made of high speed steel and high carbon steel. Thick gauge metal and high quality manufacturing technology ensure excellent wear resistance.Same quality but price lower than ‘D’ brand or others.
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • PERFECT ACCURACY -- T144D T244D & T118A, They provide efficiency for Curved Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, OSB, Plywood, Thin Sheet Metal Steel, Aluminum and more.
  • SUPERIOR VALUE -- Why pay $1-$3 per blade? Our saw blades match & exceed name-brand quality at a fraction of the price. 60 Piece Contractor Jigsaw Blades Set. Meet your everyday needs.
  • Depth adjustment allows easy setting of the correct cutting depth
  • Attaches quickly and easily to Dremel Rotary Tools without needing additional tools
  • Precision stamped steel construction for accuracy and durability.
  • Makes circles from 3 by 4" -12" (1.9-30 cm)

More Info

Jasper Tools M 300 Pro Router Circle Cutting Jig

More from Tools & Home Improvement
Search only Jasper Tools brand name
Jasper Tools M 300 Pro Router Circle Cutting Jig

Current price: 62.78 USD


Check price and availability


Height: 0.25 Inches

Length: 31 Inches

Width: 6.5 Inches

Weight: 1.3668660244 Pounds

Warranty: Manufacturer’s warranty

  • Crafted to the durable Bosch standard
  • Eliminates the need to set the screw in a mounting hole to reduce breakage
  • This assortment of blades adds function and affordability to your jigsaw blade needs
  • DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
  • CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
  • COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
  • COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Variable speed goes from 400 to 1600 strokes per minute
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • REPLACEABLE BLADE This trunking scissors set includes additional Spare Sharp heavy duty replaceable blade. Notice this shear is not suitable for cutting metal and stainless steel.
  • TURN CLASP SAFETY LOCK The turn clasp closure is easy to close and open, safe and convenient, you no need to worry about being accidentally scratched by the blade.
  • ERGONOMICALLY DESIGNED HANDLE Strong and durable integrated handle is made of aluminum alloy and PPC anti-skid cover. Comfortable grip no hand fatigue for long-term use.
  • HIGH-PRECISION ENGRAVING SCALE Clear and precise scale surface to help you cut accurately. Adjustable slider on the scale surface allows for a 45°-135°cutting angle, free to cut the trunking to different shape when needed.
  • ANTIRUST SK 5 STEEL BLADE Sharp sturdy blade, ideal for cutting chamfer, round molds, trunking and pvc strips, rubber gaskets, molding and weatherstrip.
  • Has a built-in vise that adjusts for cuts from 45 to 90 degrees. 2 inch diameter blade cuts material 3/8 inch thick x 1/2 inch wide x any length at 90 degrees and 3/8 inch wide at 45 degrees.
  • Cuts rods, tubing, squares, miniature molding, brass and plastic shapes.
  • The cuts are so smooth and accurate, you may never have to file or sand cut ends again!
  • Our popular Miter/Cut-Off saw cuts steel, brass, aluminum, wood and just about everything else in 1/10th the time it takes to cut by hand.
  • Powered Miter/Cut-Off Saw For Wood, Metal And Plastic
  • Works with all Festool Carvex Jigsaw models
  • Base adapts the jigsaw to Festool's guide rails for straight cuts
  • Circle cutter rolls up for compact storage when not in use
  • Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
  • Attaches tool-free to jigsaw
  • 🛠NOTICE:Do not fit on Fein Starlock,Bosch MX30EC-31 and Bosch Quick Release tools, Fein Supercut, Worx; The following model devices need to be used with the C-clip adapter Dremel MM40 / MM45, Bosch MX30E / MXH180B
  • 🛠Special Design for Precision cutting: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure you can get accurate cuts easy and fast while you working with it.
  • 🛠Universal Compatible Tools: Our quick release saw blades are compatible with many oscillating tools in the market, such as Black&Decker, Craftsman, Chicago Electric, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More.
  • 🛠Oscillating Saw Blades Kit: 40 pcs saw blades. Standard tooth and made of high quality metal. Ideal for sawing, scraping, shaping, polishing and wood, metal, plastic cutting, which could be used for workshop ,household or other place.
  • 🛠Tougher&Saving Your Money: Intpro oscillating multitool blades are made of high speed steel and high carbon steel. Thick gauge metal and high quality manufacturing technology ensure excellent wear resistance.Same quality but price lower than ‘D’ brand or others.
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • PERFECT ACCURACY -- T144D T244D & T118A, They provide efficiency for Curved Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, OSB, Plywood, Thin Sheet Metal Steel, Aluminum and more.
  • SUPERIOR VALUE -- Why pay $1-$3 per blade? Our saw blades match & exceed name-brand quality at a fraction of the price. 60 Piece Contractor Jigsaw Blades Set. Meet your everyday needs.
  • Depth adjustment allows easy setting of the correct cutting depth
  • Attaches quickly and easily to Dremel Rotary Tools without needing additional tools
  • Precision stamped steel construction for accuracy and durability.
  • Makes circles from 3 by 4" -12" (1.9-30 cm)
  • Weighs 1.6 pounds shipped
  • Calibrated for a 1/2-inch Router bit
  • Tabletops range in size from 7 to 52-3/4 inches
  • Makes 184 different size tabletops in 1/4-inch increments
  • Circle Jig designed for making tabletops

More Info

1    2    3    4    5    6    7    8    9    10