Elegant dremel engraver review. Reviews September, 2021, page 10

Dremel 575 Right Angle Attachment for Rotary Tool- Angle Drill Attachment , Black

More from Tools & Home Improvement
Search only Dremel brand name
Dremel 575 Right Angle Attachment for Rotary Tool- Angle Drill Attachment , Black

Current price: 19.51 USD

Saving: $11.98 (38%)


Check price and availability


Height: 3 Inches

Length: 1 Inches

Width: 2 Inches

Weight: 0.5 Pounds

Warranty: 1 year

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool

More Info

Dremel 113 Engraving Cutter, 1/8" Shank

More from Tools & Home Improvement
Search only Dremel brand name
Dremel 113 Engraving Cutter, 1/8

Current price: 6.95 USD


Check price and availability


Weight: 0.02 Pounds

Warranty: No

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.

More Info

Upgraded Rotary Tool TECCPO 1.8 amp, 10000-40000RPM, 6 Variable Speed with 6 Attachments, Universal Keyless Chuck, 196 Accessories Ideal for Crafting and DIY

More from Tools & Home Improvement
Search only TECCPO brand name
Upgraded Rotary Tool TECCPO 1.8 amp, 10000-40000RPM, 6 Variable Speed with 6 Attachments, Universal Keyless Chuck, 196 Accessories Ideal for Crafting and DIY

Current price: 49.99 USD

Saving: $5.00 (9%)


Check price and availability


Height: 2.17 Inches

Length: 9.45 Inches

Width: 1.97 Inches

Weight: 1.68 Pounds

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.

More Info

Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm

More from Tools & Home Improvement
Search only Comgrow brand name
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm

Current price: 189 USD

Saving: $40.99 (18%)


Check price and availability


Height: 9.8 inches

Length: 8.7 inches

Width: 8.7 inches

Weight: 17.63698096 Pounds

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.

More Info

TianTac Tungsten Carbide Rotary Burr Set 10pcs, Carving Burr Bits, with 3mm Shank 6mm Bit for Wood & Stone Carving, Steel Metal Working

More from Tools & Home Improvement
Search only TianTac brand name
TianTac Tungsten Carbide Rotary Burr Set 10pcs, Carving Burr Bits, with 3mm Shank 6mm Bit for Wood & Stone Carving, Steel Metal Working

Current price: 11.99 USD

Saving: $4.00 (25%)


Check price and availability


  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.

More Info

SE 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150 - 82331TF

More from Tools & Home Improvement
Search only SE brand name
SE 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150 - 82331TF

Current price: 9.61 USD


Check price and availability


Height: 0.9 Inches

Length: 6 Inches

Width: 3.2 Inches

Weight: 0.15 Pounds

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • A versatile set for numerous projects with grits 120-150
  • All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • Titanium-coated diamond burrs

More Info

Dremel 4485 Quick Change Rotary Tool Collet Nut Set

More from Tools & Home Improvement
Search only Dremel brand name
Dremel 4485 Quick Change Rotary Tool Collet Nut Set

Current price: 6.84 USD

Saving: $3.15 (32%)


Check price and availability


Height: 2 Inches

Length: 8.2 Inches

Width: 3 Inches

Weight: 0.02 Pounds

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • A versatile set for numerous projects with grits 120-150
  • All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • Titanium-coated diamond burrs
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI
  • Durable metal shanks for long-lasting use
  • Collets sizes include 1/8" (3.2mm), 3/32" (2.4mm), 1/16 (1.6mm), 1/32" (0.8mm)
  • 5 piece set includes: 480, 481, 482, 483 collets, and a quick-change collet nut
  • For use in all Dremel rotary tools and Dremel Flex Shaft.
  • Improve the grip for bits in our rotary tool line with a genuine Dremel collet set allowing you to easily use a wide range of rotary accessories.

More Info

(Bag of 500 Swabs) 3" Tapered Head Foam Swab for Aerospace, Automotive, Keyboard, by Swab-its: 71-4508 - Made in the USA - BAC5000

More from Tools & Home Improvement
Search only SWAB-ITS brand name
(Bag of 500 Swabs) 3

Current price: 139.99 USD


Check price and availability


  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • A versatile set for numerous projects with grits 120-150
  • All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • Titanium-coated diamond burrs
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI
  • Durable metal shanks for long-lasting use
  • Collets sizes include 1/8" (3.2mm), 3/32" (2.4mm), 1/16 (1.6mm), 1/32" (0.8mm)
  • 5 piece set includes: 480, 481, 482, 483 collets, and a quick-change collet nut
  • For use in all Dremel rotary tools and Dremel Flex Shaft.
  • Improve the grip for bits in our rotary tool line with a genuine Dremel collet set allowing you to easily use a wide range of rotary accessories.
  • Lint-free, Washable & reusable
  • Non-Sterile Swabs
  • 71-4508: 3.125” Overall Length Swab with Thick Rectangular Foam Mitt and Polypropylene Handle
  • Bag of 500 Swabs
  • Made in the USA - Swab-its 71-4508 - BAC5000

More Info

Walnut Hollow Creative Woodburner Introduction Value Pen for Beginner and Intermediate Woodburning, 4 Tips

More from Tools & Home Improvement
Search only Walnut Hollow brand name
Walnut Hollow Creative Woodburner Introduction Value Pen for Beginner and Intermediate Woodburning, 4 Tips

Current price: 10.49 USD

Saving: $4.50 (30%)


Check price and availability


Height: 11.5 Inches

Length: 1.5 Inches

Width: 4.5 Inches

Weight: 0.35 Pounds

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • A versatile set for numerous projects with grits 120-150
  • All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • Titanium-coated diamond burrs
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI
  • Durable metal shanks for long-lasting use
  • Collets sizes include 1/8" (3.2mm), 3/32" (2.4mm), 1/16 (1.6mm), 1/32" (0.8mm)
  • 5 piece set includes: 480, 481, 482, 483 collets, and a quick-change collet nut
  • For use in all Dremel rotary tools and Dremel Flex Shaft.
  • Improve the grip for bits in our rotary tool line with a genuine Dremel collet set allowing you to easily use a wide range of rotary accessories.
  • Lint-free, Washable & reusable
  • Non-Sterile Swabs
  • 71-4508: 3.125” Overall Length Swab with Thick Rectangular Foam Mitt and Polypropylene Handle
  • Bag of 500 Swabs
  • Made in the USA - Swab-its 71-4508 - BAC5000
  • Includes easy to follow instructions on how and why to use each of the four points (tips)
  • At 950 degrees F this pen works on most types of wood and maintains a constant temperature very well
  • UL approved for the U.S.A. and Canada and includes a long cord with an on/off switch
  • Supplied with a tool stand and four different points (tips) - Cone, Shading, Universal and Flow
  • The ideal woodburning pen for beginners, intermediate and advanced users as a first tool or a backup spare

More Info

10pcs CNC Router V Bits, 3 Edge Pyramid Engraving, 1/8" Shank CNC 3D Milling Cutter| 20/30/45/60/90 Degrees, 0.1mm Tip

More from Tools & Home Improvement
Search only Etoput brand name
10pcs CNC Router V Bits, 3 Edge Pyramid Engraving, 1/8

Current price: 13.99 USD

Saving: $6.00 (30%)


Check price and availability


Height: 0.3937 Inches

Length: 2.16535 Inches

Width: 2.16535 Inches

  • Load rating 180 lbs.
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
  • 1 rotary accessory included.
  • The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code.
  • WORKING DIAMETER: 1/16 In. (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code)
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • [ PACKAGE CONTENTS] - 1 x TECCPO 200W multi-tool, 1 x Fixed rail, 1 x Extensible support, 1 x Flexible shaft, 1 x 3-jaw chuck, 1 x Transparent protective plate, 200 x Accessories, 1 x Transparent accessory case, 1 x Tool box, 1 x User manual, 1 x Quality promise year card. TECCPO Offers a 2-YEAR QUALITY PROMISE for its products. Please contact us if you encounter any questions/concerns about anything.
  • [ VARIETY OF ACCESSORIES AND CASE ] - Ideal for a wide variety of applications. 120 high-performance accessories meet your different needs and offer more work possibilities, and it can be applied in any project. It comes with a perfect carrying case that includes a designated place for each piece in the kit, and that keeps them safe, clean, organized, and easy to find, light and easy to carry.
  • [ COMPACT DESIGN + KEYLESS CHUCK ] - Flexible shaft for easier use in tight spaces. Extendable practical rotary clamp holder. Protective cover helps avoid debris and sparks during cutting, grinding, sanding, etc. The ergonomically shaped soft rubber grip effectively reduces vibration and gives you optimal control during operation. The universal chuck is an ideal partner for the rotary tool when it needs accessory change frequently, wide acceptance for 1/32’’ to 1/8’’ shanks.
  • [ 6 ROTATION WITH ADJUSTABLE SPEED ] - Multi-use rotary tool with 6-speed mode, With 5+ MAX mode, the rotation speed is 40,000rpm max. You can freely adjust the rotation speed of 10,000rpm to 40,000rpm max, which also depends on the content of the work and the type of materials used for optimal precision whatever the application.
  • [ 200W/1.8AMP POWERFUL MOTOR ] - The powerful 200W/1.8Amp motor increases the efficiency of the TECCPO Rotary Tool by 30% compared to conventional Rotary Tools. It allows you to finish the job quickly, save time, gain depth, simply increase power, and efficiency and make work easier! You can sculpt, cut, polish, refine, drill, or simply smooth parts.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction.
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold.
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts.
  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it.
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • A versatile set for numerous projects with grits 120-150
  • All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • Titanium-coated diamond burrs
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI
  • Durable metal shanks for long-lasting use
  • Collets sizes include 1/8" (3.2mm), 3/32" (2.4mm), 1/16 (1.6mm), 1/32" (0.8mm)
  • 5 piece set includes: 480, 481, 482, 483 collets, and a quick-change collet nut
  • For use in all Dremel rotary tools and Dremel Flex Shaft.
  • Improve the grip for bits in our rotary tool line with a genuine Dremel collet set allowing you to easily use a wide range of rotary accessories.
  • Lint-free, Washable & reusable
  • Non-Sterile Swabs
  • 71-4508: 3.125” Overall Length Swab with Thick Rectangular Foam Mitt and Polypropylene Handle
  • Bag of 500 Swabs
  • Made in the USA - Swab-its 71-4508 - BAC5000
  • Includes easy to follow instructions on how and why to use each of the four points (tips)
  • At 950 degrees F this pen works on most types of wood and maintains a constant temperature very well
  • UL approved for the U.S.A. and Canada and includes a long cord with an on/off switch
  • Supplied with a tool stand and four different points (tips) - Cone, Shading, Universal and Flow
  • The ideal woodburning pen for beginners, intermediate and advanced users as a first tool or a backup spare
  • 【Advantages Application】High precision grinding and concentricity, reducing the chance of burrs and deviations. For carving, cutting, engraving, milling, slotting, sculpturing. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc.
  • Carbide Materials - Carbide has excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance
  • Suitable Material - PCB, MDF, ABS, PVC, Acrylic, Nylon, Resin, Plastics, Density board, Wood, Plywood, Hardwood etc.
  • 1/8” Shank Router V Bit - Tip: 0.1mm; Overall Length: 25mm / 28mm / 28mm / 29mm / 30mm
  • 3 Edge Pyramid cnc engraving bits - Contains 10 end milling cutters, five different cutting degrees (20°/ 30° / 45° / 60° / 90°)

More Info

1    2    3    4    5    6    7    8    9    10