Best jig saws. Reviews July, 2021

BLACK+DECKER Jig Saw, Smart Select, 5.0-Amp (BDEJS600C)

Search only BLACK+DECKER brand name
BLACK+DECKER Jig Saw, Smart Select, 5.0-Amp (BDEJS600C)

Current price: 33.97 USD


Check price and availability


Height: 9.25 Inches

Length: 11.75 Inches

Width: 4.375 Inches

Weight: 4.6 Pounds

Warranty: 2 year limited manufacturers warranty

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision

More Info

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Search only Fulton brand name
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Current price: 25.99 USD


Check price and availability


Height: 1.5 Inches

Length: 24.4 Inches

Width: 3 Inches

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.

More Info

BOSCH Power Tools Jig Saws - JS470E Corded Top-Handle Jigsaw - 120V Low-Vibration, 7.0-Amp Variable Speed For Smooth Cutting Up To 5-7/8\" Inch on Wood, 3/8\" Inch on Steel For Countertop, Woodworking , Blue

Search only BOSCH brand name
BOSCH Power Tools Jig Saws - JS470E Corded Top-Handle Jigsaw - 120V Low-Vibration, 7.0-Amp Variable Speed For Smooth Cutting Up To 5-7/8\

Current price: 159 USD


Check price and availability


Weight: 10.4 Pounds

Warranty: 30-Day money back guarantee- 1 year warranty

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade

More Info

Milescraft 14000713 Saw Guide for Circular and Jig Saws

Search only Milescraft Inc. brand name
Milescraft 14000713 Saw Guide for Circular and Jig Saws

Current price: 12.79 USD


Check price and availability


Height: 16.3 Inches

Length: 1.3 Inches

Width: 7.3 Inches

Weight: 1 Pounds

Warranty: Three-Year Limited Warranty

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch

More Info

Thin Rip Jig Table Saw Jig to Make Repetitive Narrow Strip Cuts on Table Saws and Also Works with Router Tables and Band Saws

Search only Peachtree Woodworking Supply brand name
Thin Rip Jig Table Saw Jig to Make Repetitive Narrow Strip Cuts on Table Saws and Also Works with Router Tables and Band Saws

Current price: 24.99 USD

Saving: $10.00 (29%)


Check price and availability


Height: 3.25 Inches

Length: 8.5 Inches

Width: 5.2 Inches

Weight: 1.25 Pounds

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.

More Info

DRILAX Drill Bit Hole Saw Guide Jig Fixture Vacuum Suction Base with Water Coolant Hole

Search only DRILAX brand name
DRILAX Drill Bit Hole Saw Guide Jig Fixture Vacuum Suction Base with Water Coolant Hole

Current price: 17.94 USD


Check price and availability


Height: 2 Inches

Length: 8 Inches

Width: 6 Inches

Weight: 0.8125 Pounds

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • Secure The Guide with Suction Base - Feed Water through the Integrated Hole
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Removable Ball Bearings - Infinite Configurations - Flip the Plate for Larger Sizes up to 3-1/4"
  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4" Drill Diameters - Dual Side Plate
  • Adjustable Hole Saw Drill Guide Jig Fixture with Suction Base - Integrated Water Hole - Good Quality

More Info

20PCS T Shank Jigsaw Blades Set for Wood Plastic Metal Replace Bosch DEWALT Black+Decker TACKLIFE Makita SKIL and Rockwell BladeRunner X2 Jig Saws Includes 4 Each of T101B T119BO T144D T118A & T118B

Search only Cozzmts brand name
20PCS T Shank Jigsaw Blades Set for Wood Plastic Metal Replace Bosch DEWALT Black+Decker TACKLIFE Makita SKIL and Rockwell BladeRunner X2 Jig Saws Includes 4 Each of T101B T119BO T144D T118A & T118B

Current price: 12.98 USD


Check price and availability


Height: 0.393700787 Inches

Length: 6.692913379 Inches

Width: 4.724409444 Inches

Weight: 0.33510263824 Pounds

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • Secure The Guide with Suction Base - Feed Water through the Integrated Hole
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Removable Ball Bearings - Infinite Configurations - Flip the Plate for Larger Sizes up to 3-1/4"
  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4" Drill Diameters - Dual Side Plate
  • Adjustable Hole Saw Drill Guide Jig Fixture with Suction Base - Integrated Water Hole - Good Quality
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • HIGH QUALITY -- Cozzmts jig saw blades are made of high-quality materials such as high carbon steel and high-speed steel, and are produced by high-cost processes such as quenching and tempering. It is an ideal combination for general woodworking and thick metal or thin metal (ferrous and non-ferrous metals). Provides an efficient cutting experience.
  • SUIT ADVANTAGE -- Five jigsaws blades that share the same features as the Bosch T5002. The number of saw blades is twice that of the Bosch T5002, with better quality and better price.

More Info

MICROJIG - TJ-5000 MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)

Search only MICROJIG brand name
MICROJIG - TJ-5000 MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)

Current price: 129 USD

Saving: $10.95 (8%)


Check price and availability


Height: 1.75 Inches

Length: 26 Inches

Width: 8.75 Inches

Weight: 3.4 Pounds

Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • Secure The Guide with Suction Base - Feed Water through the Integrated Hole
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Removable Ball Bearings - Infinite Configurations - Flip the Plate for Larger Sizes up to 3-1/4"
  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4" Drill Diameters - Dual Side Plate
  • Adjustable Hole Saw Drill Guide Jig Fixture with Suction Base - Integrated Water Hole - Good Quality
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • HIGH QUALITY -- Cozzmts jig saw blades are made of high-quality materials such as high carbon steel and high-speed steel, and are produced by high-cost processes such as quenching and tempering. It is an ideal combination for general woodworking and thick metal or thin metal (ferrous and non-ferrous metals). Provides an efficient cutting experience.
  • SUIT ADVANTAGE -- Five jigsaws blades that share the same features as the Bosch T5002. The number of saw blades is twice that of the Bosch T5002, with better quality and better price.
  • Full instructional DVD and bonus project plans included
  • Two independent Memory Locks keeps angles for repeat taper cuts
  • Infinite taper adjustments between 0 and 10 degrees
  • Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Push block
  • Precision taper cuts as accurate as 1/8 of a degree

More Info

DELTA 34-184 Universal-Deluxe Tenoning Jig

Search only Delta brand name
DELTA 34-184 Universal-Deluxe Tenoning Jig

Current price: 144.99 USD

Saving: $19.91 (12%)


Check price and availability


Height: 8.25 Inches

Length: 11.75 Inches

Width: 12 Inches

Warranty: 2 Year Limited

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • Secure The Guide with Suction Base - Feed Water through the Integrated Hole
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Removable Ball Bearings - Infinite Configurations - Flip the Plate for Larger Sizes up to 3-1/4"
  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4" Drill Diameters - Dual Side Plate
  • Adjustable Hole Saw Drill Guide Jig Fixture with Suction Base - Integrated Water Hole - Good Quality
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • HIGH QUALITY -- Cozzmts jig saw blades are made of high-quality materials such as high carbon steel and high-speed steel, and are produced by high-cost processes such as quenching and tempering. It is an ideal combination for general woodworking and thick metal or thin metal (ferrous and non-ferrous metals). Provides an efficient cutting experience.
  • SUIT ADVANTAGE -- Five jigsaws blades that share the same features as the Bosch T5002. The number of saw blades is twice that of the Bosch T5002, with better quality and better price.
  • Full instructional DVD and bonus project plans included
  • Two independent Memory Locks keeps angles for repeat taper cuts
  • Infinite taper adjustments between 0 and 10 degrees
  • Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Push block
  • Precision taper cuts as accurate as 1/8 of a degree
  • Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work
  • 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock
  • Adjustable 90 degree positive stop for accurate repetitive cuts
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch

More Info

POWERTEC 71035 Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum Rails and Laser Etched Scale, 15 Degrees of Taper

Search only POWERTEC brand name
POWERTEC 71035 Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum Rails and Laser Etched Scale, 15 Degrees of Taper

Current price: 21.73 USD


Check price and availability


Height: 1.5 Inches

Length: 24.5 Inches

Width: 2.75 Inches

Weight: 1.7 Pounds

  • ADJUSTABLE SHOE - Adjustable shoe with wire guard for enhanced stability and line of site
  • HIGH POWER - Variable-speed motor generates up to 3,000 SPM of cutting power
  • BEVELED CUTS - Makes beveled cuts up to 45 degrees
  • CURVE CONTROL TECHNOLOGY - Four curve settings for maximum control over rounded cuts
  • HIGH PERFORMANCE ELECTRIC JIG SAW - 5 amp electric jig saw with a 3⁄4” blade orbital action for increased precision
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Accuracy: Internal precision machined plunging system and low vibration design enhances accuracy and allows for the smooth jigsaw operation in a variety of jobs
  • Secure: This Bosch tool includes a large, sturdy die cast foot with steel insert and on board bevel wrench; The JS470E's multidirectional blade clamp delivers superior grip of T shank blades
  • Control: Variable speed dial sets maximum speed and accelerator trigger controls operating speed; Features an ambidextrous lock on button for steadiness and user comfort
  • 4 in 1: 4 orbital action tool settings provide different blade strokes for smooth to aggressive cuts for taking on the toughest cutting tasks
  • Convenient: Featuring a tool less blade change system and fast insertion with a blade ejection lever that eliminates need to touch hot saw blade
  • 4 metal bars and special clips accommodate most circular and jig saws
  • Cuts circles from 4″ to 19″ in diameter
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws
  • Incremental trim feature makes tool-free adjustments by 1/16 inch
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • Secure The Guide with Suction Base - Feed Water through the Integrated Hole
  • You Can Use the Guide to Start the Hole and Remove the Guide for the Remainder of the Holes
  • Removable Ball Bearings - Infinite Configurations - Flip the Plate for Larger Sizes up to 3-1/4"
  • Adjustable Plate for All Sizes of Hole Saws up to 3-1/4" Drill Diameters - Dual Side Plate
  • Adjustable Hole Saw Drill Guide Jig Fixture with Suction Base - Integrated Water Hole - Good Quality
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS.
  • COMPATIBLE -- Compatible with over 90 percent of current jigsaws including Bosch , DEWALT , BLACK+DECKER , TACKLIFE , Makita , SKIL , Porter Cable , Ryobi and Rockwell BladeRunner X2 jig saws, the jigsaws is a versatile addition to any toolset.
  • MORE POWER -- Five contact points are designed on the T-Shank of the saw blade for maximum grip and stability without the need to secure the screws in the mounting holes to reduce damage.
  • HIGH QUALITY -- Cozzmts jig saw blades are made of high-quality materials such as high carbon steel and high-speed steel, and are produced by high-cost processes such as quenching and tempering. It is an ideal combination for general woodworking and thick metal or thin metal (ferrous and non-ferrous metals). Provides an efficient cutting experience.
  • SUIT ADVANTAGE -- Five jigsaws blades that share the same features as the Bosch T5002. The number of saw blades is twice that of the Bosch T5002, with better quality and better price.
  • Full instructional DVD and bonus project plans included
  • Two independent Memory Locks keeps angles for repeat taper cuts
  • Infinite taper adjustments between 0 and 10 degrees
  • Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Push block
  • Precision taper cuts as accurate as 1/8 of a degree
  • Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work
  • 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock
  • Adjustable 90 degree positive stop for accurate repetitive cuts
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch
  • FEATURES: Sturdy construction and design with extruded legs with an anodized finish, a tapered handle with a round head and textured finish, plush an improved laser etched 17 gauge steel hinge plate
  • PREMIUM: Made with a highly durable, yet lightweight aluminum extrusion construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy duty applications
  • VERSATILE: Perfect for making angled cuts, projects that require slight tapers or other woodworking projects such as building kitchen table legs, chairs, wooden racks, wedges, and more
  • FUNCTION: Used as a taper cutting guide for table saws, this easy-to-use woodworking tool helps you to make long rip cuts at angles from 1” per foot (4.8 degrees) or up to 3” per foot (15 degrees)
  • INCLUDES: (1) Table Saw Taper Cutting Jig with 24” rails with work stops, ergonomic handle, lock knob and laser etched scale

More Info

1    2    3    4    5    6    7    8    9    10