Wonderful Welding Wire. Reviews September, 2021, page 7

Blue Demon ERCuSi-A X .023 X 2LB Spool Welding Wire

Search only Blue Demon brand name
Blue Demon ERCuSi-A X .023 X 2LB Spool Welding Wire

Current price: 29.52 USD


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 4 Inches

Weight: 0.01 Pounds

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels

More Info

PGN - E71T-GS .030" (0.8 mm) Gasless Flux Core Mild Steel MIG Welding Wire - 2 Lbs Spool

Search only PGN Bearings brand name
PGN - E71T-GS .030

Current price: 16.2 USD


Check price and availability


Height: 2 Inches

Length: 4.5 Inches

Width: 4.5 Inches

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire

More Info

Flux Core Gasless Mig Wire, Mild Steel E71TGS 0.030 Inch Diameter, 2 lbs Mig Welding Spool (0.030 Inch 2 LBS)

Search only hynade brand name
Flux Core Gasless Mig Wire, Mild Steel E71TGS 0.030 Inch Diameter, 2 lbs Mig Welding Spool (0.030 Inch 2 LBS)

Current price: 15.99 USD

Saving: $1.00 (6%)


Check price and availability


Weight: 2 Pounds

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed

More Info

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035" (0.9mm) 8"-spool

Search only WeldingCity brand name
WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035

Current price: 29.99 USD


Check price and availability


Weight: 11 Pounds

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.

More Info

US Forge Welding Solid Mild Steel MIG Wire .035 2-Pound Spool #00672

Search only US Forge brand name
US Forge Welding Solid Mild Steel MIG Wire .035 2-Pound Spool #00672

Current price: 10.79 USD


Check price and availability


Height: 4 Inches

Length: 21 Inches

Width: 4.5 Inches

Weight: 1.98 Pounds

Warranty: 90 days

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding

More Info

PGN - ER70S-6 .030" (0.8 mm) Mild Steel MIG Welding Wire - 33 Lbs Spool

Search only PGN Bearings brand name
PGN - ER70S-6 .030

Current price: 62.1 USD


Check price and availability


Height: 5 Inches

Length: 11 Inches

Width: 11 Inches

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire

More Info

PGN - E71T-11 .030" (0.8 mm) Gasless Flux Core Mild Steel MIG Welding Wire - 10 Lbs Spool

Search only PGN Bearings brand name
PGN - E71T-11 .030

Current price: 38.5 USD


Check price and availability


Height: 2 Inches

Length: 8 Inches

Width: 8 Inches

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • Weight: 10-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-11 Gasless Flux Core MIG Welding Wire

More Info

Thermadyne Firepower 1440-0222 33-Pound 035-70S-33 Firepower Welding Wire

Search only THERMADYNE brand name
Thermadyne Firepower 1440-0222 33-Pound 035-70S-33 Firepower Welding Wire

Current price: 61 USD


Check price and availability


Height: 4.4 Inches

Length: 12.3 Inches

Width: 12.6 Inches

Weight: 35.2 Pounds

  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • Weight: 10-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-11 Gasless Flux Core MIG Welding Wire
  • DC reverse polarity
  • Requires a shielding gas
  • Best used with clean or prepared welding surface
  • Designed to be used on mild steel
  • For general purpose MIG welding

More Info

EWCS 2 Gauge Premium Welding Cable Black + Red Combo Pack - 20 Feet of Each - Made in USA

Search only EWCS brand name
EWCS 2 Gauge Premium Welding Cable Black + Red Combo Pack - 20 Feet of Each - Made in USA

Current price: 116.8 USD


Check price and availability


  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • Weight: 10-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-11 Gasless Flux Core MIG Welding Wire
  • DC reverse polarity
  • Requires a shielding gas
  • Best used with clean or prepared welding surface
  • Designed to be used on mild steel
  • For general purpose MIG welding
  • Ships 2 Hand Coils to a Pack
  • Rated 600 Volts -50C +105C
  • 100% Copper - Approx 624 Strands
  • Sunlight & Water Resistant
  • Gas & Oil Resistant

More Info

ER308L .030" .035" Mig Stainless Steel Welding Wire 10 lb & 25lb Spool (.030" 10 lb)

Search only Hy-weld brand name
ER308L .030

Current price: 59 USD


Check price and availability


  • Joining copper, copper-silicon and copper-zincs to themselves or steel
  • Surfacing area subject to erosion
  • An excellent choice for joining plain or galvanized sheet metal as well as other coated steels
  • Weight: 2-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-GS Gasless Flux Core MIG Welding Wire
  • 🔶Package: 1 Spool * flux core welding wire(.030 2lbs)
  • 🔶Performance: Mig welding wire .030 flux core , has excellent welding process properties ,Smooth arc action, High feedability, Easy to weld
  • 🔶Suitable for outdoor use : This gasless welder wire does not require shielding gas, it is ideal for outdoor welding
  • 🔶Low spatter: Virtually low Spatter, Full slag coverage, remove slag easily , Porosity free, Good bead appearance
  • 🔶Self-Shielded: E71T-GS welding wire is an all-position, single-pass, multi pass, flux cored welding wire designed to weld mild steel. No welding protection gases needed
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Typical element content (wt%) in product: C=0.08; Mn=1.89; Si=0.83; S=0.019; P=0.021; Cu=0.24; Fe=balance.
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6; 11-lb net weight of welding wire; 8-in spool with 2-in center hole; spool wrapped in moisture-resistant plastic film.
  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
  • Excellent choice for welding low carbon mild steel, I deal for body panel repair, fences, and yard tools
  • Fabrication and repair of lightweight structural steel
  • A shielding gas is required when welding with this wire
  • Can be used for sheet metal applications when smooth welds are needed
  • Excellent wire designed for single and multiple pass welding
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • Weight: 10-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • E71T-11 Gasless Flux Core MIG Welding Wire
  • DC reverse polarity
  • Requires a shielding gas
  • Best used with clean or prepared welding surface
  • Designed to be used on mild steel
  • For general purpose MIG welding
  • Ships 2 Hand Coils to a Pack
  • Rated 600 Volts -50C +105C
  • 100% Copper - Approx 624 Strands
  • Sunlight & Water Resistant
  • Gas & Oil Resistant
  • Very similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation
  • Used for welding types 304, 304L, 308 and 308L stainless steels
  • Can also be used for welding types 321 and 347 stainless steels

More Info

1    2    3    4    5    6    7    8    9    10