Inexpensive Welding Wire. Reviews September, 2021, page 5

WeldingCity 5 Rolls E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035" (0.9mm) 2-lb Spool | Pack of 5 Rolls

Search only WeldingCity brand name
WeldingCity 5 Rolls E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035

Current price: 54.99 USD


Check price and availability


Weight: 2 Pounds

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.

More Info

Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire

Search only Blue Demon brand name
Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire

Current price: 33.36 USD

Saving: $9.42 (22%)


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 4 Inches

Weight: 1.15 Pounds

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L

More Info

Lincoln Electric ED030632 SuperArc L 56 0.35 2Lb SP 2 LB

Search only Lincoln Electric brand name
Lincoln Electric ED030632 SuperArc L 56 0.35 2Lb SP 2 LB

Current price: 15.43 USD


Check price and availability


Weight: 0.01 Pounds

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel

More Info

Kiswel USA K-NGS E-71TGS 0.030in. Dia 10lb. Gasless-Flux Core Wire Welding wire Made in USA

Search only Kiswel brand name
Kiswel USA K-NGS E-71TGS 0.030in. Dia 10lb. Gasless-Flux Core Wire Welding wire Made in USA

Current price: 36.99 USD


Check price and availability


  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel

More Info

Cuwiny Gasless Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 2-Pound Spool (0.035-Inch 2LB)

Search only Cuwiny brand name
Cuwiny Gasless Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 2-Pound Spool (0.035-Inch 2LB)

Current price: 15.2 USD


Check price and availability


  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.

More Info

ER308L Stainless Steel MIG Welding Wire 2-Lb Spool for MIG Welding Process for 304 304L 308 308L 321 and 347 Stainless Steels (1-pack 0.030")

Search only findmall brand name
ER308L Stainless Steel MIG Welding Wire 2-Lb Spool for MIG Welding Process for 304 304L 308 308L 321 and 347 Stainless Steels (1-pack 0.030

Current price: 24.25 USD


Check price and availability


  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Applications - ER308L Stainless Steel MIG Welding Wire for MIG welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels.
  • Features - ER308L Stainless Steel MIG Welding Wire with a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually Argon/CO2 mix.
  • Package - one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available.
  • Available wire diameters - 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).
  • Specification - AWS A5.9/ASME SFA A5.9/ER308L; 2-lb net weight of stainless steel welding wire; 4" spool wrapped in moisture-resistant plastic film; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

More Info

Hobart H222108-R22 10-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.035-Inch

Search only Hobart brand name
Hobart H222108-R22 10-Pound E71T-11 Carbon-Steel Flux-Cored Welding Wire, 0.035-Inch

Current price: 62.99 USD


Check price and availability


Height: 2.6 Inches

Length: 8.2 Inches

Width: 8.2 Inches

Weight: 11 Pounds

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Applications - ER308L Stainless Steel MIG Welding Wire for MIG welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels.
  • Features - ER308L Stainless Steel MIG Welding Wire with a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually Argon/CO2 mix.
  • Package - one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available.
  • Available wire diameters - 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).
  • Specification - AWS A5.9/ASME SFA A5.9/ER308L; 2-lb net weight of stainless steel welding wire; 4" spool wrapped in moisture-resistant plastic film; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
  • Item Package Weight: 11.080004 lb
  • Item Package Dimension: 8.25" L x 8.25" W x 2.75" H
  • Model Number: H222108-R22
  • Country Of Origin: United States

More Info

2 Gauge 2 AWG 10 Feet Black + 10 Feet Red (20 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

Search only WindyNation brand name
2 Gauge 2 AWG 10 Feet Black + 10 Feet Red (20 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

Current price: 53.92 USD


Check price and availability


Height: 5.7 Inches

Length: 10.5 Inches

Width: 2.8 Inches

Weight: 4.8 Pounds

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Applications - ER308L Stainless Steel MIG Welding Wire for MIG welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels.
  • Features - ER308L Stainless Steel MIG Welding Wire with a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually Argon/CO2 mix.
  • Package - one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available.
  • Available wire diameters - 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).
  • Specification - AWS A5.9/ASME SFA A5.9/ER308L; 2-lb net weight of stainless steel welding wire; 4" spool wrapped in moisture-resistant plastic film; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
  • Item Package Weight: 11.080004 lb
  • Item Package Dimension: 8.25" L x 8.25" W x 2.75" H
  • Model Number: H222108-R22
  • Country Of Origin: United States
  • Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • 2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)

More Info

PGN - ER70S-6 .030" (0.8 mm) Mild Steel MIG Welding Wire - 33 Lbs Spool

Search only PGN Bearings brand name
PGN - ER70S-6 .030

Current price: 62.1 USD


Check price and availability


Height: 5 Inches

Length: 11 Inches

Width: 11 Inches

  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Applications - ER308L Stainless Steel MIG Welding Wire for MIG welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels.
  • Features - ER308L Stainless Steel MIG Welding Wire with a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually Argon/CO2 mix.
  • Package - one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available.
  • Available wire diameters - 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).
  • Specification - AWS A5.9/ASME SFA A5.9/ER308L; 2-lb net weight of stainless steel welding wire; 4" spool wrapped in moisture-resistant plastic film; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
  • Item Package Weight: 11.080004 lb
  • Item Package Dimension: 8.25" L x 8.25" W x 2.75" H
  • Model Number: H222108-R22
  • Country Of Origin: United States
  • Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • 2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire

More Info

USWELDWIRE ENiFe-Cl .035" Nickel 55 Cast Iron MIG Welding Wire 2 Lb Spool

Search only USWELDWIRE brand name
USWELDWIRE ENiFe-Cl .035

Current price: 78.5 USD


Check price and availability


  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • AWS A5.22 Welding current DCEP
  • It can be used for welding 430 stainless
  • It may be used for welding all 300 series stainless up to and including 308L
  • Container Size: 2 lb.; Diameter: 0.035"; Material: Carbon Steel
  • Excellent for outdoor windy conditions.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Applications - ER308L Stainless Steel MIG Welding Wire for MIG welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels.
  • Features - ER308L Stainless Steel MIG Welding Wire with a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually Argon/CO2 mix.
  • Package - one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available.
  • Available wire diameters - 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).
  • Specification - AWS A5.9/ASME SFA A5.9/ER308L; 2-lb net weight of stainless steel welding wire; 4" spool wrapped in moisture-resistant plastic film; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
  • Item Package Weight: 11.080004 lb
  • Item Package Dimension: 8.25" L x 8.25" W x 2.75" H
  • Model Number: H222108-R22
  • Country Of Origin: United States
  • Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • 2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Weight: 33-lbs
  • Wire Diameter: .030" inches (0.8mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • Recommended shielding gas: 98% Argon/2% Oxygen
  • The welds are moderately hard and require carbide tipped tools for post weld machining. A preheat and interpass temperature of not less than 350ºF is recommended during welding.
  • It can also be used to repair castings.
  • Nickel 55 (ENiFe-Cl) welding electrode is designed for welding gray iron castings to themselves as well as joining them to mild steel.
  • Shipment Via USPS Priority (2-4 Business Days)

More Info

1    2    3    4    5    6    7    8    9    10