High quality Welding Wire. Reviews September, 2021, page 3

UNAOIWN Gasless Flux Cored Welding Wires Low Carton Steel Self Shielded E71TGS.035-Inch 2lb Spool

Search only UNAOIWN brand name
UNAOIWN Gasless Flux Cored Welding Wires Low Carton Steel Self Shielded E71TGS.035-Inch 2lb Spool

Current price: 12.99 USD


Check price and availability


Height: 1.85 Inches

Length: 3.94 Inches

Width: 3.94 Inches

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding

More Info

LINCOLN ELECTRIC CO ED016354 .035 10LB FluxCore Wire,Silver

Search only Lincoln Electric brand name
LINCOLN ELECTRIC CO ED016354 .035 10LB FluxCore Wire,Silver

Current price: 59.38 USD

Saving: $25.61 (30%)


Check price and availability


Height: 2.75 Inches

Length: 8.25 Inches

Width: 8.25 Inches

Weight: 10.2 Pounds

Warranty: Manufacturer Warranty

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders

More Info

PGN - ER70S-6 .035" (0.9 mm) Mild Steel MIG Welding Wire - 44 Lbs Spool

Search only PGN Bearings brand name
PGN - ER70S-6 .035

Current price: 80.8 USD


Check price and availability


Height: 5 Inches

Length: 11 Inches

Width: 11 Inches

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire

More Info

Gasless Flux-Cored Welding Wire, Carton Steel Self Shielded, E71t-GS, 0.030-Diameter, 2-Pound

Search only NEAGLORY brand name
Gasless Flux-Cored Welding Wire, Carton Steel Self Shielded, E71t-GS, 0.030-Diameter, 2-Pound

Current price: 12.99 USD


Check price and availability


Height: 1.8 Inches

Length: 3.94 Inches

Width: 3.94 Inches

Weight: 2 Pounds

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism

More Info

PGN - ER70S-6 .035" (0.9 mm) Mild Steel MIG Welding Wire - 2x 11 Lbs Spool

Search only PGN Bearings brand name
PGN - ER70S-6 .035

Current price: 47.3 USD


Check price and availability


Height: 2 Inches

Length: 8 Inches

Width: 8 Inches

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire

More Info

WeldingCity 5 Rolls E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035" (0.9mm) 2-lb Spool | Pack of 5 Rolls

Search only WeldingCity brand name
WeldingCity 5 Rolls E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035

Current price: 54.99 USD


Check price and availability


Weight: 2 Pounds

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.

More Info

PGN - ER70S-6 .023" (0.6 mm) Mild Steel MIG Welding Wire - 11 Lbs Spool

Search only PGN Bearings brand name
PGN - ER70S-6 .023

Current price: 30.8 USD


Check price and availability


  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • Weight: 11-lbs
  • Wire Diameter: .023" inches (0.6mm)
  • ER70S-6 Mild Steel MIG Welding Wire

More Info

ER4043 - MIG Aluminum Welding Wire - 1 Lb x 0.035" (4 SPOOLS)

Search only SÜA brand name
ER4043 - MIG Aluminum Welding Wire - 1 Lb x 0.035

Current price: 39.99 USD


Check price and availability


Weight: 4 Pounds

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • Weight: 11-lbs
  • Wire Diameter: .023" inches (0.6mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 1 Lb of wire per Spool - Available diameters: 0.030", 0.035" and 0.045" - Available Spool Quantities 1, 2, 4 and 6-Pack. Select your choice from the menu.
  • Melting range is 1065 °F– 1170 °F, density is 0.097 lbs/in3 and post anodizing color is gray
  • ER4043 is commonly used for welding grades 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0 to name just a few
  • Less sensitive to weld cracking than other aluminum alloys and the 5% silicon content lowers the melting point, increases fluidity of the weld puddle and leaves a bright shiny weld deposit.
  • ER4043, commonly referred to as “AlSi5", has a 5% silicon and is the oldest and one of the most widely used aluminum welding wires for general purpose applications

More Info

ER70S-6 - MIG Mild & Low Alloy Steel Welding Wire - 33 Lb x 0.035"

Search only TGB brand name
ER70S-6 - MIG Mild & Low Alloy Steel Welding Wire - 33 Lb x 0.035

Current price: 74.64 USD


Check price and availability


Weight: 33 Pounds

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • Weight: 11-lbs
  • Wire Diameter: .023" inches (0.6mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 1 Lb of wire per Spool - Available diameters: 0.030", 0.035" and 0.045" - Available Spool Quantities 1, 2, 4 and 6-Pack. Select your choice from the menu.
  • Melting range is 1065 °F– 1170 °F, density is 0.097 lbs/in3 and post anodizing color is gray
  • ER4043 is commonly used for welding grades 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0 to name just a few
  • Less sensitive to weld cracking than other aluminum alloys and the 5% silicon content lowers the melting point, increases fluidity of the weld puddle and leaves a bright shiny weld deposit.
  • ER4043, commonly referred to as “AlSi5", has a 5% silicon and is the oldest and one of the most widely used aluminum welding wires for general purpose applications
  • Available Diameters: 0.023", 0.030", 0.035"and 0.045" - Available Spool Weights: 33 and 44 Lb. Select from menu.
  • Common uses include construction work, farm implement fabrications, general shop applications with poor fit-up or rusty, oily plates, tanks, steel castings or forgings
  • Copper-plated and layer wound. Especially well suited for sheet metal applications or structural plate steels that have moderate amounts of rust oil or mill scale on them
  • ER70S-6 is the most common of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 and CO2/Argon Mix shielding gases, and leaving a smoother weld bead with little to zero post-weld cleanup.
  • ***READ THIS BEFORE YOU BUY*** Carefully check dimensions shown on picture #2 and make sure this spool will fit your welder.

More Info

Blue Demon E71T-11 X .035 X 10LB Spool gasless flux core welding wire

Search only Blue Demon brand name
Blue Demon E71T-11 X .035 X 10LB Spool gasless flux core welding wire

Current price: 45 USD


Check price and availability


Height: 3 Inches

Length: 9 Inches

Width: 9 Inches

Weight: 10 Pounds

  • 𝐃𝐢𝐚𝐦𝐞𝐭𝐞𝐫: 0.035". Weight: 2 lbs. (907 g)
  • 𝐎𝐜𝐜𝐚𝐬𝐢𝐨𝐧:Excellent for outdoor conditions. Does not require shielding gas, have good wind resistance and stomatal resistance.
  • 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: This E71T-GS wire has much better penetration and a more consistent flow to the weld, leaving a smoother weld bead and avoiding multiple bumps.
  • 𝐍𝐓·𝐄𝟕𝟏𝐓-𝐆𝐒:Gasless flux cored welding wire NT·E71T-GS, Smooth arc action, High feedability, Easy to weld
  • 𝐆𝐚𝐬𝐥𝐞𝐬𝐬 𝐅𝐥𝐮𝐱 𝐂𝐨𝐫𝐞𝐝:Shielding gas is not required, All positions, Single and multi pass welding
  • Model Number: ED016354
  • Fast freezing characteristics
  • Excellent weld and bead appearance
  • Designed for MIG wire feed welders
  • Weight: 44-lbs
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 【Standard Diameter】 0.030 Inch,net weight 2 pound
  • 【Molding effect】 Beautiful weld bead and high strength
  • 【Welding effect】 Small splash, high molding efficiency
  • 【Convenience】 Eliminates bulky gas cylinders and separate wire feeding mechanism
  • Weight: 22-lbs Total (2x 11-lbs Spool)
  • Wire Diameter: .035" inches (0.9mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount; Buy More Save More!
  • Self-shielded; no welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
  • Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
  • Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
  • Weight: 11-lbs
  • Wire Diameter: .023" inches (0.6mm)
  • ER70S-6 Mild Steel MIG Welding Wire
  • 1 Lb of wire per Spool - Available diameters: 0.030", 0.035" and 0.045" - Available Spool Quantities 1, 2, 4 and 6-Pack. Select your choice from the menu.
  • Melting range is 1065 °F– 1170 °F, density is 0.097 lbs/in3 and post anodizing color is gray
  • ER4043 is commonly used for welding grades 6061, 6063, 5052, 3004, 3003 and cast alloys 356.0, 357.0, 413.0, and 443.0 to name just a few
  • Less sensitive to weld cracking than other aluminum alloys and the 5% silicon content lowers the melting point, increases fluidity of the weld puddle and leaves a bright shiny weld deposit.
  • ER4043, commonly referred to as “AlSi5", has a 5% silicon and is the oldest and one of the most widely used aluminum welding wires for general purpose applications
  • Available Diameters: 0.023", 0.030", 0.035"and 0.045" - Available Spool Weights: 33 and 44 Lb. Select from menu.
  • Common uses include construction work, farm implement fabrications, general shop applications with poor fit-up or rusty, oily plates, tanks, steel castings or forgings
  • Copper-plated and layer wound. Especially well suited for sheet metal applications or structural plate steels that have moderate amounts of rust oil or mill scale on them
  • ER70S-6 is the most common of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 and CO2/Argon Mix shielding gases, and leaving a smoother weld bead with little to zero post-weld cleanup.
  • ***READ THIS BEFORE YOU BUY*** Carefully check dimensions shown on picture #2 and make sure this spool will fit your welder.
  • Country of Origin : United States
  • Assembly and maintenance welding, machine parts
  • Package Weight: 4.825 kilograms
  • Package Dimensions: 20.980 H x 6.680 L x 20.675 W (centimetres)

More Info

1    2    3    4    5    6    7    8    9    10