Best Welding Equipment. Strong-Hand-Tools brand. New releases 2021

Strong Hand Tools, Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom, 4 Piece Kit (XDV4: 2 pcs. 2", Pull Force 12 lbs) (XFV4: 2 pcs. 2.2", Pull Force 18 lbs), MVDF44

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom, 4 Piece Kit (XDV4: 2 pcs. 2

Current price: 20.19 USD

Saving: $9.99 (33%)


Check price and availability


Height: 1 Inches

Length: 4 Inches

Width: 4 Inches

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.

More Info

Strong Hand Tools - VAL-MST327 , Magnetic Corner Squares, (Twin Pack), 12°, 90° & 60° Angle Setting, Max Pull Force: 30 lbs, Low Profile, 3-1/4 x 3-3/4 x 5/8″, MST327

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools - VAL-MST327 , Magnetic Corner Squares, (Twin Pack), 12°, 90° & 60° Angle Setting, Max Pull Force: 30 lbs, Low Profile, 3-1/4 x 3-3/4 x 5/8″, MST327

Current price: 25.2 USD


Check price and availability


Height: 0.63 Inches

Length: 3.25 Inches

Width: 3.75 Inches

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.

More Info

Strong Hand Tools, JointMaster, 90 Degree, Angle Clamping Tool, Throat Depth: 3", Max Capacity: 1-1/4", OAL: 8-1/2", Single Hand T-Joint Clamp Tool, PL634

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, JointMaster, 90 Degree, Angle Clamping Tool, Throat Depth: 3

Current price: 22.32 USD

Saving: $9.70 (30%)


Check price and availability


Height: 1 Inches

Length: 7 Inches

Width: 5 Inches

Weight: 1.09790206476 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.

More Info

Strong Hand Tools, Deluxe MIG Welding Pliers, Slag Hammer, Flat Face Hammer, Scraper, Fine & Coarse Files, Side Pull V-Notch, Retention Chain, Ergonomic Grip, Heat Treated, 8 Inch, PM25

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Deluxe MIG Welding Pliers, Slag Hammer, Flat Face Hammer, Scraper, Fine & Coarse Files, Side Pull V-Notch, Retention Chain, Ergonomic Grip, Heat Treated, 8 Inch, PM25

Current price: 21.12 USD


Check price and availability


  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.

More Info

Strong Hand Tools, Mini Magnetic Fabrication Squares, (Twin Pack), Max. Pull Force: 25 LBS, Angles: 30°, 60°, 45°, 90°, Dimension: 2-5/16 x 2 x 5/8″, MS346AT

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Mini Magnetic Fabrication Squares, (Twin Pack), Max. Pull Force: 25 LBS, Angles: 30°, 60°, 45°, 90°, Dimension: 2-5/16 x 2 x 5/8″, MS346AT

Current price: 11.05 USD

Saving: $1.94 (15%)


Check price and availability


Height: 0.63 Inches

Length: 2.31 Inches

Width: 2 Inches

Weight: 1 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.

More Info

Strong Hand Tools, Fully Adjustable, Fully Articulated Arm Rest, Welding/Fabrication, ARA18

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Fully Adjustable, Fully Articulated Arm Rest, Welding/Fabrication, ARA18

Current price: 87.98 USD


Check price and availability


  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • The 2-section articulated arm is height adjustable [slide up or down the support column] and swivels quickly and easily for work in precise locations.
  • This affordable, fully adjustable arm rest with the fully articulated arm, supports your extended arm while working. Steady your arm or hand, for greater weld control and reduced fatigue.
  • Place the sturdy, Anti-tipping, magnetic base plate on any steel surface and level by adjusting the two levelling bolts.
  • The comfortable, generously sized arm cup turns in a 360° arc for complete freedom in positioning, and instant re-positioning.
  • Fully adjustable. Fully articulated.

More Info

Strong Hand Tools Nomad Welding Table with MagSpring Clamp and Mini Magnet Twin Pack, Model Number TS3020FK

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools Nomad Welding Table with MagSpring Clamp and Mini Magnet Twin Pack, Model Number TS3020FK

Current price: 150 USD

Saving: $36.67 (20%)


Check price and availability


Weight: 46 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • The 2-section articulated arm is height adjustable [slide up or down the support column] and swivels quickly and easily for work in precise locations.
  • This affordable, fully adjustable arm rest with the fully articulated arm, supports your extended arm while working. Steady your arm or hand, for greater weld control and reduced fatigue.
  • Place the sturdy, Anti-tipping, magnetic base plate on any steel surface and level by adjusting the two levelling bolts.
  • The comfortable, generously sized arm cup turns in a 360° arc for complete freedom in positioning, and instant re-positioning.
  • Fully adjustable. Fully articulated.
  • Sold on Amazon

More Info

Strong Hand Tools BuildPro Modular Welding Table, Model Number TMA54738

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools BuildPro Modular Welding Table, Model Number TMA54738

Current price: 2130 USD


Check price and availability


Weight: 420 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • The 2-section articulated arm is height adjustable [slide up or down the support column] and swivels quickly and easily for work in precise locations.
  • This affordable, fully adjustable arm rest with the fully articulated arm, supports your extended arm while working. Steady your arm or hand, for greater weld control and reduced fatigue.
  • Place the sturdy, Anti-tipping, magnetic base plate on any steel surface and level by adjusting the two levelling bolts.
  • The comfortable, generously sized arm cup turns in a 360° arc for complete freedom in positioning, and instant re-positioning.
  • Fully adjustable. Fully articulated.
  • Sold on Amazon
  • Clamps shown sold separately
  • Designed to fit a full line of standard clamps and accessories (sold separately)

More Info

Strong Hand Tools, Nomad, Steel Welding Table, Three 1.1″ (28mm) Tabletop Slots, Adjustable Angle & Height, Casters, Retractable Guide Rails, Eccentric Leveling Foot, TS3020, Black

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Nomad, Steel Welding Table, Three 1.1″ (28mm) Tabletop Slots, Adjustable Angle & Height, Casters, Retractable Guide Rails, Eccentric Leveling Foot, TS3020, Black

Current price: 143.34 USD

Saving: $21.25 (13%)


Check price and availability


Weight: 44 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • The 2-section articulated arm is height adjustable [slide up or down the support column] and swivels quickly and easily for work in precise locations.
  • This affordable, fully adjustable arm rest with the fully articulated arm, supports your extended arm while working. Steady your arm or hand, for greater weld control and reduced fatigue.
  • Place the sturdy, Anti-tipping, magnetic base plate on any steel surface and level by adjusting the two levelling bolts.
  • The comfortable, generously sized arm cup turns in a 360° arc for complete freedom in positioning, and instant re-positioning.
  • Fully adjustable. Fully articulated.
  • Sold on Amazon
  • Clamps shown sold separately
  • Designed to fit a full line of standard clamps and accessories (sold separately)
  • Table moves about the work area on 2 sturdy casters.
  • Tabletop height can be adjusted from 26″ to 32″ (660 – 810 mm).
  • Affordable, convenient welding and work table for the welding shop or home shop
  • Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges.
  • Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility.
  • Three 1. 1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table.

More Info

Strong Hand Tools, Universal Welding Torch Rest (Adjustable Height) - MRD90

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Universal Welding Torch Rest (Adjustable Height) - MRD90

Current price: 35.2 USD


Check price and availability


  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • Max. Pull Force: 30 LBS (14 kg)
  • Time saving magnetic tools for use in the shop & in the field.
  • Use the outer edges of the Corner Magnet for setting up materials at 60.
  • One side corner "relief" provides clearance for tall lips.
  • Create 90 corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Power source type: Hand Powered
  • Ergonomic Comfort Grip with Retention Chain.
  • Induction Hardened Cutting Edge, Chipper Edge & Scraper Edge
  • Fine & Coarse File Nose for Inner Nozzle Scraping.
  • Flat Hammer with Scraper Edge for Quick Spatter Removal.
  • Slag Hammer Chipper Side for Removing Slag & Debris Left Over from Welding.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Dimension: 2-5/16 x 2 x 5/8″ (59 x 50 x 16 mm)
  • Max. Pull Force: 25 LBS (10 kg)
  • Angles: 30°, 60°, 45°, 90°
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • The 2-section articulated arm is height adjustable [slide up or down the support column] and swivels quickly and easily for work in precise locations.
  • This affordable, fully adjustable arm rest with the fully articulated arm, supports your extended arm while working. Steady your arm or hand, for greater weld control and reduced fatigue.
  • Place the sturdy, Anti-tipping, magnetic base plate on any steel surface and level by adjusting the two levelling bolts.
  • The comfortable, generously sized arm cup turns in a 360° arc for complete freedom in positioning, and instant re-positioning.
  • Fully adjustable. Fully articulated.
  • Sold on Amazon
  • Clamps shown sold separately
  • Designed to fit a full line of standard clamps and accessories (sold separately)
  • Table moves about the work area on 2 sturdy casters.
  • Tabletop height can be adjusted from 26″ to 32″ (660 – 810 mm).
  • Affordable, convenient welding and work table for the welding shop or home shop
  • Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges.
  • Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility.
  • Three 1. 1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table.
  • Item Package Weight: 4.0 lb
  • Item Package Dimension: 9.5" L x 5.5" W x 3.5" H
  • Model Number: MRD90
  • Country Of Origin: United States

More Info

1    2    3    4    5    6    7    8    9    10