High quality Welding Clamps. Reviews July, 2021, page 3

50LBS Arrow Welding Magnet Holder 4pcs 4" Strong Magnetic Metal Working Mig Tools and Equipment Workshop Welder Magnets Welding Clamps 45, 90, 135 Degree Angle

More from Tools & Home Improvement
Search only Fleetise brand name
50LBS Arrow Welding Magnet Holder 4pcs 4

Current price: 22.99 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.

More Info

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

More from Tools & Home Improvement
Search only Toolly brand name
Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Current price: 21.95 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects

More Info

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

More from Tools & Home Improvement
Search only YESWELDER brand name
YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

Current price: 12.99 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time

More Info

Magnet Welding Clamps 50LB Strong Arrow Welding Tools 6 Pcs Magnetic Square Holder, 45 90 135 Degree Angle

More from Tools & Home Improvement
Search only brand name
Magnet Welding Clamps 50LB Strong Arrow Welding Tools 6 Pcs Magnetic Square Holder, 45 90 135 Degree Angle

Current price: 30.99 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.

More Info

IRWIN VISE-GRIP Original C Clamp, Locking, Swivel Pad Tip, 18-Inch (22)

More from Tools & Home Improvement
Search only IRWIN brand name
IRWIN VISE-GRIP Original C Clamp, Locking, Swivel Pad Tip, 18-Inch (22)

Current price: 28.99 USD

Saving: $8.41 (22%)


Check price and availability


Height: 1.187 Inches

Length: 20.25 Inches

Width: 8 Inches

Weight: 1.543235834 Pounds

  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes

More Info

Crescent 18" Locking C-Clamp with Swivel Pads - Carded - C18CCSN

More from Tools & Home Improvement
Search only Crescent brand name
Crescent 18

Current price: 24.97 USD


Check price and availability


Height: 1.38 Inches

Length: 18.5 Inches

Width: 6.5 Inches

Weight: 1.3 Pounds

  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes
  • Hex key receiving hole on knurl for increased torque & convenience
  • Red plastisol dip on release lever for improved comfort and Crescent Brand identity
  • Swivel tips minimize marring on softer materials
  • Locking C clamps are faster and easier to use than standard clamps
  • Maximum jaw opening per ASME specs-9 Inch

More Info

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

More from Tools & Home Improvement
Search only ANER brand name
200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

Current price: 39.99 USD


Check price and availability


Height: 3.149606296 Inches

Length: 12.598425184 Inches

Width: 3.93700787 Inches

Weight: 0.0220462262 Pounds

  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes
  • Hex key receiving hole on knurl for increased torque & convenience
  • Red plastisol dip on release lever for improved comfort and Crescent Brand identity
  • Swivel tips minimize marring on softer materials
  • Locking C clamps are faster and easier to use than standard clamps
  • Maximum jaw opening per ASME specs-9 Inch
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.
  • Package Included:1 x Welding Ground Clamp
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.
  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.

More Info

CIPCO PRO TOOL 10-Inch Welding Pipe Plier, Fast Release, C-Clamp Locking with Large V-Pads (2 Pack)

More from Tools & Home Improvement
Search only CIPCO PRO TOOL brand name
CIPCO PRO TOOL 10-Inch Welding Pipe Plier, Fast Release, C-Clamp Locking with Large V-Pads (2 Pack)

Current price: 38.99 USD


Check price and availability


Height: 1.96 Inches

Length: 10.24 Inches

Width: 4.72 Inches

  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes
  • Hex key receiving hole on knurl for increased torque & convenience
  • Red plastisol dip on release lever for improved comfort and Crescent Brand identity
  • Swivel tips minimize marring on softer materials
  • Locking C clamps are faster and easier to use than standard clamps
  • Maximum jaw opening per ASME specs-9 Inch
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.
  • Package Included:1 x Welding Ground Clamp
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.
  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.
  • 1”, 2” and 3” large V-Pads provide a better clamping surface.
  • The V-Pads on the Pipe Pliers adapt to many different shapes and sizes.
  • Adjustable top spindle for holding pipes of varying sizes.
  • Soft Rubber Grip Handles and Fast Release Handle Design.
  • Sold as 2-Pack. Heavy duty Chrome Vanadium steel. For use in welding applications and for holding awkward shapes in place.

More Info

DRAGONITE Heavy Duty C Clamp, Vise Grip Locking Pliers With Swivel Pads, 18 Inch Face Clamp for Woodworking, Welding and Pocket Hole Joinery, 2 Piece

More from Tools & Home Improvement
Search only DRAGONITE brand name
DRAGONITE Heavy Duty C Clamp, Vise Grip Locking Pliers With Swivel Pads, 18 Inch Face Clamp for Woodworking, Welding and Pocket Hole Joinery, 2 Piece

Current price: 45.99 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes
  • Hex key receiving hole on knurl for increased torque & convenience
  • Red plastisol dip on release lever for improved comfort and Crescent Brand identity
  • Swivel tips minimize marring on softer materials
  • Locking C clamps are faster and easier to use than standard clamps
  • Maximum jaw opening per ASME specs-9 Inch
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.
  • Package Included:1 x Welding Ground Clamp
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.
  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.
  • 1”, 2” and 3” large V-Pads provide a better clamping surface.
  • The V-Pads on the Pipe Pliers adapt to many different shapes and sizes.
  • Adjustable top spindle for holding pipes of varying sizes.
  • Soft Rubber Grip Handles and Fast Release Handle Design.
  • Sold as 2-Pack. Heavy duty Chrome Vanadium steel. For use in welding applications and for holding awkward shapes in place.
  • 2-PACK PACKAGE: two piece vise grip c clamp as a set, to meet the needs of general clamping
  • HIGHLY DURABLE CONSTRUCTION: High carbon steel forging, sandblasted surface, anti-corrosion and wear-resistant, Ergonomic non-slip grips for comfort and ease-of-use, Each joint is fixed with reinforced rivets, which is firm and durable
  • EASY-TO-REGULATE CLAMPING PRESSURE: Easily and quickly adjust jaw capacity with a simple thumbscrew, helps create a flush joint, set your desired clamping pressure by turning the thumbscrew for more or less pressure
  • EVENLY DISTRIBUTE CLAMPING FORCE: The locking pliers equipped with thickened metal swivel pads, and large clamp faces spread pressure evenly, prevent scratches on wood and glass, The material is firmly fixed and will not be easily deformed
  • QUICK, CONVENIENT CLAMPING: This c clamp provides quick and convenient clamping, the jaw depth is 8 inch (200 mm) and can grip materials up to 6-1/4 inch (160 mm), the face clamp is suitable for woodworking, welding and more work

More Info

C-Clamp Locking Pliers Set,6-Inch,9-Inch,11-Inch,14-Inch,4 Piece C Pliers with Plastic Storage Box

More from Tools & Home Improvement
Search only SOLUDE brand name
C-Clamp Locking Pliers Set,6-Inch,9-Inch,11-Inch,14-Inch,4 Piece C Pliers with Plastic Storage Box

Current price: 35.99 USD


Check price and availability


  • ᴥ Warranty: 3 month return and life time support, money back or new item for replacement.
  • ᴥ Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion; The center hole on the magnets allows you to easily grab the weld magnets.
  • ᴥ Use for welding, soldering, assembly marking off & pipe installation.
  • ᴥ To angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • ᴥ Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
  • Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps
  • MAGNETIC HOLDERS▶ Magnets on the pad face only
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply
  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time
  • KEEP SAFE - The center hole on the magnets allows you to grab and move the magnets easily.
  • WIDE APPLICATIONS - Convenient to connect parts whether you are welding, soldering, assembling, marking off, installing pipes or separating steel plates as a floater.
  • PERFECT WELDING ANGLE - Designed for 45, 90, and 135-degree angles, come with detailed illustrate.
  • STURDY QUALITY - Made of high quality stainless steel with powder coated finish, these welding magnets are accurate, durable, and resistant to rust and corrosion.
  • POWERFUL WELDING MAGNET - 6 pcs 4" welding magnets and clamps, each arrow magnets can support metal objects up to 50lb, free your hands and make works easier.
  • 8-inch jaw capacity
  • Classic trigger release designed to provide maximum locking force
  • Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability
  • Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
  • IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
  • Classic trigger release designed to provide maximum locking force
  • Constructed of high-grade heat-treated alloy steel for durability
  • Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
  • Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
  • 8"-wide jaw opening provide greater versatility in clamping a variety of shapes
  • Hex key receiving hole on knurl for increased torque & convenience
  • Red plastisol dip on release lever for improved comfort and Crescent Brand identity
  • Swivel tips minimize marring on softer materials
  • Locking C clamps are faster and easier to use than standard clamps
  • Maximum jaw opening per ASME specs-9 Inch
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.
  • Package Included:1 x Welding Ground Clamp
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.
  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.
  • 1”, 2” and 3” large V-Pads provide a better clamping surface.
  • The V-Pads on the Pipe Pliers adapt to many different shapes and sizes.
  • Adjustable top spindle for holding pipes of varying sizes.
  • Soft Rubber Grip Handles and Fast Release Handle Design.
  • Sold as 2-Pack. Heavy duty Chrome Vanadium steel. For use in welding applications and for holding awkward shapes in place.
  • 2-PACK PACKAGE: two piece vise grip c clamp as a set, to meet the needs of general clamping
  • HIGHLY DURABLE CONSTRUCTION: High carbon steel forging, sandblasted surface, anti-corrosion and wear-resistant, Ergonomic non-slip grips for comfort and ease-of-use, Each joint is fixed with reinforced rivets, which is firm and durable
  • EASY-TO-REGULATE CLAMPING PRESSURE: Easily and quickly adjust jaw capacity with a simple thumbscrew, helps create a flush joint, set your desired clamping pressure by turning the thumbscrew for more or less pressure
  • EVENLY DISTRIBUTE CLAMPING FORCE: The locking pliers equipped with thickened metal swivel pads, and large clamp faces spread pressure evenly, prevent scratches on wood and glass, The material is firmly fixed and will not be easily deformed
  • QUICK, CONVENIENT CLAMPING: This c clamp provides quick and convenient clamping, the jaw depth is 8 inch (200 mm) and can grip materials up to 6-1/4 inch (160 mm), the face clamp is suitable for woodworking, welding and more work
  • 【ADJUSTABLE PRESSURE】The screw can adjust the front and back distance of the handle brace to increase the strength of holding the handle.
  • 【MOVABLE SWIVEL PAD】With two extra large non-marring clamp faces and swiveling pads that automatically adjust according the surface’s form while avoiding damage.
  • 【HIGH QUALITY】Constructed of high-grade, heat-treated carbon steel for maximum toughness and durability. Galvanized surface, anti-skid and wear-resistant, improving rust resistance.
  • 【STURDY & COMPACT BOX】Designated slots in the case keep every piece in place. Perfect for storage and carry. Including 6-inch,9-inch,11-inch,14-inch pliers, ideal for clasping any material whatever their shape or size.
  • 【ERGONOMIC NON-SLIP HANDLE】Ergonomic rubberized soft grip with anti-slip surface texture design reduces slipping and eliminates the possibility of pinching. Classic trigger lock release makes it convenient and effortless to lock the pliers in place while you work

More Info

1    2    3    4    5    6    7    8    9    10