Best Welding Clamps. Strong-Hand-Tools brand. New releases 2021

Strong Hand Tools, Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom, 4 Piece Kit (XDV4: 2 pcs. 2", Pull Force 12 lbs) (XFV4: 2 pcs. 2.2", Pull Force 18 lbs), MVDF44

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom, 4 Piece Kit (XDV4: 2 pcs. 2

Current price: 20.37 USD

Saving: $9.81 (33%)


Check price and availability


Height: 1 Inches

Length: 4 Inches

Width: 4 Inches

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.

More Info

Strong Hand, 3-Axis Fixture Vise with Quick Acting Screw, Two Stand-Offs, Swing Away Arm with 3.75-Inch Miter Joint, 2.45-Inch T-Clearance - WAC35-SW

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand, 3-Axis Fixture Vise with Quick Acting Screw, Two Stand-Offs, Swing Away Arm with 3.75-Inch Miter Joint, 2.45-Inch T-Clearance - WAC35-SW

Current price: 198.99 USD

Saving: $45.21 (19%)


Check price and availability


Height: 8 Inches

Length: 8.5 Inches

Width: 9 Inches

Weight: 24 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction

More Info

Strong Hand Tools, Light Duty Utility Clamp, 6.5" Capacity, 500 LB Clamping Pressure, 5/8"-5/16" Rail Size, 3-1/4" Throat Depth, 5/16-18" Tapped Hole, UD65

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Light Duty Utility Clamp, 6.5

Current price: 14 USD


Check price and availability


Height: 1.13 Inches

Length: 9.25 Inches

Width: 4.75 Inches

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"

More Info

Strong Hand Tools, Grasshopper Welding Finger, AGH230

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Grasshopper Welding Finger, AGH230

Current price: 24.77 USD


Check price and availability


Height: 4 Inches

Length: 7 Inches

Width: 4 Inches

Weight: 0.992080179 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs

More Info

Strong Hand Tools, JointMaster, 90 Degree, Angle Clamping Tool, Throat Depth: 3", Max Capacity: 1-1/4", OAL: 8-1/2", Single Hand T-Joint Clamp Tool, PL634

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, JointMaster, 90 Degree, Angle Clamping Tool, Throat Depth: 3

Current price: 22.32 USD

Saving: $9.70 (30%)


Check price and availability


Height: 1 Inches

Length: 7 Inches

Width: 5 Inches

Weight: 1.09790206476 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.

More Info

Strong Hand Tools, Heavy Duty, Adjust-O Magnet Square, On/Off Switches, Pull Force: 65 lbs, 4-3/8" x 3-3/4" x 1-1/8", MSA46-HD

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Heavy Duty, Adjust-O Magnet Square, On/Off Switches, Pull Force: 65 lbs, 4-3/8

Current price: 30.92 USD

Saving: $8.77 (22%)


Check price and availability


Height: 1 Inches

Length: 4.38 Inches

Width: 3.75 Inches

Weight: 2 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Dimension: 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm)
  • Max. Pull Force: 90 LBS (40 kg)
  • Easy to clean. Simply turn off and wipe.
  • Ideal for round and square tubing, angle, and flat stock.
  • Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up!
  • The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree.

More Info

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

Current price: 65.18 USD


Check price and availability


Height: 4 Inches

Length: 8.5 Inches

Width: 8.5 Inches

Weight: 2.866009406 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Dimension: 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm)
  • Max. Pull Force: 90 LBS (40 kg)
  • Easy to clean. Simply turn off and wipe.
  • Ideal for round and square tubing, angle, and flat stock.
  • Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up!
  • The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree.
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding.
  • Pipe Welding Alignment Tools
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces.

More Info

Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60

Current price: 159.97 USD

Saving: $18.82 (11%)


Check price and availability


Height: 5.25 Inches

Length: 10 Inches

Width: 8.25 Inches

Weight: 11.0231131 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Dimension: 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm)
  • Max. Pull Force: 90 LBS (40 kg)
  • Easy to clean. Simply turn off and wipe.
  • Ideal for round and square tubing, angle, and flat stock.
  • Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up!
  • The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree.
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding.
  • Pipe Welding Alignment Tools
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces.
  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.

More Info

Strong Hand Tools, PowerBase, Grounding Magnet, 300A @ 60% Duty Cycle, 44 LBS Magnetic Force, On/Off Switch, Machined V Surface, Copper Connector Stud, GM203

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, PowerBase, Grounding Magnet, 300A @ 60% Duty Cycle, 44 LBS Magnetic Force, On/Off Switch, Machined V Surface, Copper Connector Stud, GM203

Current price: 60.48 USD

Saving: $6.74 (10%)


Check price and availability


Weight: 1.2 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Dimension: 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm)
  • Max. Pull Force: 90 LBS (40 kg)
  • Easy to clean. Simply turn off and wipe.
  • Ideal for round and square tubing, angle, and flat stock.
  • Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up!
  • The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree.
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding.
  • Pipe Welding Alignment Tools
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces.
  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Powerful rare earth magnet delivers heavy duty holding power.
  • Power through your grounding applications! Start grounding instantly!
  • Magnetic Force: 44 LBS (20 kg)
  • Dimension: 2 x 2 x 1.4″ (50 x 50 x 64 mm)
  • Amperage: 300A @ 60% Duty Cycle

More Info

Strong Hand Tools, 6" Pipe Pliers, Two Fixed V-Pads, Throat Depth: 2″ (50 mm), MAX Clamping Capacity: 1″ – 2″ (25 – 50 mm), Thread: M8, PG622V

More from Tools & Home Improvement
Search only Strong Hand Tools brand name
Strong Hand Tools, 6

Current price: 13.99 USD


Check price and availability


Height: 1.2 Inches

Length: 9 Inches

Width: 3.5 Inches

Weight: 0.025 Pounds

  • Magnets on both pad face and the bottom
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F
  • Each v-pad contains 4 rare-earth magnets.
  • Hold and position round, flat, and square Parts in light duty substructure applications!
  • Light duty & tight spot holding! Build, hold, and position steel.
  • T-clearance (2. 5″)
  • Miter Joints (3. 75″)
  • “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws
  • Free Magnetic Rest Blocks To Support And Stabilize Long Stock!
  • Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction
  • Tapped hole: 5/16-18
  • Rail size: 5/8" X 5/16"
  • Clamping pressure: 500lbs.
  • Throat depth: 3-1/4"
  • Capacity: 6-1/2"
  • Pinpoint holding provides maximum clearance for tack welds
  • Spring-loaded arm self-adjusts for REPETITIOUS WORK HOLDING. Slid arm to adjust hold-down force
  • Magnetic V-Pad Base
  • Brass Tip
  • Max. Pull Force 35 lbs
  • PL Series comes with 1 pair of pliers.
  • A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints.
  • The single-hand corner clamping tool
  • Ideal for quick hold and release on metal, wood & synthetic materials.
  • Fast, precise and affordable clamping tools for corners and T-joints.
  • Dimension: 4-3/8 x 3-3/4 x 1-1/8″ (111 x 95 x 29 mm)
  • Max. Pull Force: 90 LBS (40 kg)
  • Easy to clean. Simply turn off and wipe.
  • Ideal for round and square tubing, angle, and flat stock.
  • Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up!
  • The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree.
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding.
  • Pipe Welding Alignment Tools
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces.
  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Powerful rare earth magnet delivers heavy duty holding power.
  • Power through your grounding applications! Start grounding instantly!
  • Magnetic Force: 44 LBS (20 kg)
  • Dimension: 2 x 2 x 1.4″ (50 x 50 x 64 mm)
  • Amperage: 300A @ 60% Duty Cycle
  • Bottom v-pad: fixed
  • Top v-pad: fixed
  • Thread: M8
  • Opening: 1″ – 2″ (25 – 50 mm)
  • Throat depth: 2″ (50 mm)
  • Oal: 6″ (150 mm)

More Info

1    2    3    4    5    6    7    8    9