Inexpensive Welding Cable. Reviews July, 2021, page 5

2 Gauge 2 AWG 5 Feet Black + 5 Feet Red (10 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

More from Industrial & Scientific
Search only WindyNation brand name
2 Gauge 2 AWG 5 Feet Black + 5 Feet Red (10 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

Current price: 30.46 USD


Check price and availability


Height: 8.5 Inches

Length: 8.5 Inches

Width: 1.5 Inches

Weight: 2.3 Pounds

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)

More Info

EWCS 1/0 Gauge Premium Extra Flexible Welding Cable 600 Volt - Red - 15 Feet - Made in The USA

More from Industrial & Scientific
Search only EWCS brand name
EWCS 1/0 Gauge Premium Extra Flexible Welding Cable 600 Volt - Red - 15 Feet - Made in The USA

Current price: 74.8 USD


Check price and availability


Height: 4.5 Inches

Length: 9 Inches

Width: 9 Inches

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant

More Info

10'' BLACK SINGLE SET (PAIR) FIXED BASE WELDING CABLE LEAD REELS

More from Industrial & Scientific
Search only RPM LEAD REELS brand name
10'' BLACK SINGLE SET (PAIR) FIXED BASE WELDING CABLE LEAD REELS

Current price: 379 USD


Check price and availability


Height: 13 Inches

Length: 11 Inches

Width: 15 Inches

Weight: 37 Pounds

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”

More Info

Hobart 195195 No. 2 Stick Cable Set, 50-Foot

More from Industrial & Scientific
Search only Hobart brand name
Hobart 195195 No. 2 Stick Cable Set, 50-Foot

Current price: 249.99 USD


Check price and availability


Weight: 4.55 Pounds

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder

More Info

4 Gauge Torbon X - 20 Feet Black - 100% Copper Premium Industrial Grade Extra Flexible Welding Cable 600 Volt

More from Industrial & Scientific
Search only TORBON X brand name
4 Gauge Torbon X - 20 Feet Black - 100% Copper Premium Industrial Grade Extra Flexible Welding Cable 600 Volt

Current price: 39.8 USD


Check price and availability


  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot

More Info

4/0 Gauge - 10 Feet Black + 10 Feet Red Combo - EWCS Brand 100% Copper Premium Industrial Grade Extra Flexible Welding Cable 600 Volt Black+Red Combo Package

More from Industrial & Scientific
Search only EWCS brand name
4/0 Gauge - 10 Feet Black + 10 Feet Red Combo - EWCS Brand 100% Copper Premium Industrial Grade Extra Flexible Welding Cable 600 Volt Black+Red Combo Package

Current price: 164.8 USD


Check price and availability


  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot
  • All EWCS products are proudly made in the USA! Have a job that needs a longer length of wire? EWCS offers up to 250 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our welding cables are flexible Class K stranded electrolytic grade 100% copper. This cable is made up of 2014 individual strands of copper.
  • EWCS cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All EWCS cables are rated for 600 Volts welding service, from -50C to 105C. This makes them a great choice for a wide variety jobs, from powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck conversions!
  • EWCS 4/0 gauge premium extra flexible welding cable Combo Pack is exactly what you need for all your welding jobs. Rated -50C to 105C 600 Volts Welding Service, this package contains one Black cable 10 feet long and one Red cable 10 feet long. This cable has an OD of 0.720 inches.

More Info

#1 Gauge AWG - Flex-A-Prene - Welding/Battery Cable - Black - 600 V - Made in USA (30 FEET)

More from Industrial & Scientific
Search only Flex-A-Prene brand name
#1 Gauge AWG - Flex-A-Prene - Welding/Battery Cable - Black - 600 V - Made in USA (30 FEET)

Current price: 84.2 USD


Check price and availability


Weight: 10 Pounds

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot
  • All EWCS products are proudly made in the USA! Have a job that needs a longer length of wire? EWCS offers up to 250 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our welding cables are flexible Class K stranded electrolytic grade 100% copper. This cable is made up of 2014 individual strands of copper.
  • EWCS cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All EWCS cables are rated for 600 Volts welding service, from -50C to 105C. This makes them a great choice for a wide variety jobs, from powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck conversions!
  • EWCS 4/0 gauge premium extra flexible welding cable Combo Pack is exactly what you need for all your welding jobs. Rated -50C to 105C 600 Volts Welding Service, this package contains one Black cable 10 feet long and one Red cable 10 feet long. This cable has an OD of 0.720 inches.
  • You will recieve 30 Feet of AWG Gauge #1 Black Welding Cable
  • O.D: 0.481" - Wall Tickness: 0.08" - MADE IN THE USA
  • Meets SAE J1127 - RoHS Compliant - VW-1 Flame test as per UL2556 - Suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders
  • Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil and water
  • CONDUCTORS: Highly flexible Class K 30 gauge copper - INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts

More Info

Lenco LC-10MP (Red & Black) Tapered Cable Plug for Welder, 05080 & 05081 (Cable sizes 4-1/0)

More from Industrial & Scientific
Search only LENCO MARINE brand name
Lenco LC-10MP (Red & Black) Tapered Cable Plug for Welder, 05080 & 05081 (Cable sizes 4-1/0)

Current price: 21.85 USD


Check price and availability


  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot
  • All EWCS products are proudly made in the USA! Have a job that needs a longer length of wire? EWCS offers up to 250 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our welding cables are flexible Class K stranded electrolytic grade 100% copper. This cable is made up of 2014 individual strands of copper.
  • EWCS cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All EWCS cables are rated for 600 Volts welding service, from -50C to 105C. This makes them a great choice for a wide variety jobs, from powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck conversions!
  • EWCS 4/0 gauge premium extra flexible welding cable Combo Pack is exactly what you need for all your welding jobs. Rated -50C to 105C 600 Volts Welding Service, this package contains one Black cable 10 feet long and one Red cable 10 feet long. This cable has an OD of 0.720 inches.
  • You will recieve 30 Feet of AWG Gauge #1 Black Welding Cable
  • O.D: 0.481" - Wall Tickness: 0.08" - MADE IN THE USA
  • Meets SAE J1127 - RoHS Compliant - VW-1 Flame test as per UL2556 - Suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders
  • Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil and water
  • CONDUCTORS: Highly flexible Class K 30 gauge copper - INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts
  • Taper Length: 1.062
  • Taper Dimensions: .330-.352
  • For cable sizes 4 - 1/0
  • 1 Red and 1 Black. 05080 and 05081. LC-10MP
  • *** Designed to Fit Miller Welders ***

More Info

EWCS 2/0 Gauge Premium Extra Flexible Welding Cable 600 Volt - Black - 25 Feet - Made in the USA

More from Industrial & Scientific
Search only EWCS brand name
EWCS 2/0 Gauge Premium Extra Flexible Welding Cable 600 Volt - Black - 25 Feet - Made in the USA

Current price: 139.8 USD


Check price and availability


  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot
  • All EWCS products are proudly made in the USA! Have a job that needs a longer length of wire? EWCS offers up to 250 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our welding cables are flexible Class K stranded electrolytic grade 100% copper. This cable is made up of 2014 individual strands of copper.
  • EWCS cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All EWCS cables are rated for 600 Volts welding service, from -50C to 105C. This makes them a great choice for a wide variety jobs, from powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck conversions!
  • EWCS 4/0 gauge premium extra flexible welding cable Combo Pack is exactly what you need for all your welding jobs. Rated -50C to 105C 600 Volts Welding Service, this package contains one Black cable 10 feet long and one Red cable 10 feet long. This cable has an OD of 0.720 inches.
  • You will recieve 30 Feet of AWG Gauge #1 Black Welding Cable
  • O.D: 0.481" - Wall Tickness: 0.08" - MADE IN THE USA
  • Meets SAE J1127 - RoHS Compliant - VW-1 Flame test as per UL2556 - Suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders
  • Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil and water
  • CONDUCTORS: Highly flexible Class K 30 gauge copper - INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts
  • Taper Length: 1.062
  • Taper Dimensions: .330-.352
  • For cable sizes 4 - 1/0
  • 1 Red and 1 Black. 05080 and 05081. LC-10MP
  • *** Designed to Fit Miller Welders ***
  • Specially packaged and printed by EWCS to assure quality
  • Ships as a coil
  • Highly flexible 30 gauge copper stranding
  • Water Resistant
  • Sunlight Resistant

More Info

#2 Gauge AWG - Flex-A-Prene - Welding/Battery Cable - Black - 600 V - Made in USA (50 FEET)

More from Industrial & Scientific
Search only Flex-A-Prene brand name
#2 Gauge AWG - Flex-A-Prene - Welding/Battery Cable - Black - 600 V - Made in USA (50 FEET)

Current price: 90 USD


Check price and availability


Weight: 12 Pounds

  • Made in the USA. Complies with SAE J1127. IEC and RoHS compliant
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards
  • High stranding cable count combined with EPDM insulation results in a very flexible cable
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents
  • Includes 5 feet of black 2 gauge cable + 5 feet of red 2 gauge cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • Ships as a coil
  • Highly flexible 30 Gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • Cable capacity per 10” Reel: 150’ of 1/0 cable & 125’ of 2/0 cable
  • Powder coated for a lasting finish
  • Reels are fully rebuildable with full line of replacement parts.
  • Heavy-duty manual friction brake is adjustable, allows for adjustable tension and prevents free spooling of leads.
  • Stays connected to the welder at all times. “Constant Reel Setup”
  • Item Package Dimension: 19.5" L x 11.25" W x 7.25" H
  • 100% duty cycle
  • 50 ft work cable with clamp
  • Consists of 50 ft No. 2 electrode cable with holder
  • TORBON X products are proudly made in the USA! Have a job that needs a longer length of cable? We offer 120 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our 100% Copper welding cables are flexible Class K stranded electrolytic grade copper. This 4 gauge cable is made up of 364 individual strands of bare copper.
  • TORBON X cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All TORBON X cables are rated for 600 Volts Welding Service and the durable cut resistant EDPM synthetic rubber remains flexible from -50C to 105C. This makes them a great choice for a wide variety jobs including solar projects, battery banks, powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck upgrades!
  • TORBON X 4 gauge premium extra flexible welding cable is engineered for all your toughest welding jobs. This package contains one Black Cable 20 feet long rated -50C to 105C 600 Volts Welding Service. The cable has an OD of 0.348 inches. The cable weighs .147# pounds per foot
  • All EWCS products are proudly made in the USA! Have a job that needs a longer length of wire? EWCS offers up to 250 options of common gauges and footages of premium grade stranded copper Welding Cables for any and all purposes.
  • Our welding cables are flexible Class K stranded electrolytic grade 100% copper. This cable is made up of 2014 individual strands of copper.
  • EWCS cables are thoroughly tested to meet SAE (Society of Automotive Engineers) requirements. The premium EDPM insulation is sunlight, acid, chemical, gasoline, oil and UV resistant.
  • All EWCS cables are rated for 600 Volts welding service, from -50C to 105C. This makes them a great choice for a wide variety jobs, from powering and installing winches, installing high powered car subwoofers and amplifiers, and wiring batteries and inverters on all types of vehicles--even Big 3 and Big 4 automotive and truck conversions!
  • EWCS 4/0 gauge premium extra flexible welding cable Combo Pack is exactly what you need for all your welding jobs. Rated -50C to 105C 600 Volts Welding Service, this package contains one Black cable 10 feet long and one Red cable 10 feet long. This cable has an OD of 0.720 inches.
  • You will recieve 30 Feet of AWG Gauge #1 Black Welding Cable
  • O.D: 0.481" - Wall Tickness: 0.08" - MADE IN THE USA
  • Meets SAE J1127 - RoHS Compliant - VW-1 Flame test as per UL2556 - Suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders
  • Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil and water
  • CONDUCTORS: Highly flexible Class K 30 gauge copper - INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts
  • Taper Length: 1.062
  • Taper Dimensions: .330-.352
  • For cable sizes 4 - 1/0
  • 1 Red and 1 Black. 05080 and 05081. LC-10MP
  • *** Designed to Fit Miller Welders ***
  • Specially packaged and printed by EWCS to assure quality
  • Ships as a coil
  • Highly flexible 30 gauge copper stranding
  • Water Resistant
  • Sunlight Resistant
  • You will recieve 50 Feet of AWG Gauge #2 Black Welding Cable
  • O.D: 0.413" - Wall Tickness: 0.06" - MADE IN THE USA
  • Meets SAE J1127 - RoHS Compliant - VW-1 Flame test as per UL2556 - Suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders
  • Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil and water
  • CONDUCTORS: Highly flexible Class K 30 gauge copper - INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50°C to +105°C (-58°F to 221°F) - Rated 600 Volts

More Info

1    2    3    4    5    6    7    8    9    10