Best Water Pipe Heat Cables. Reviews June, 2021

HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

Search only HEATIT brand name
HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

Current price: 69.99 USD


Check price and availability


Height: 4 Inches

Length: 42 Inches

Width: 4 Inches

Weight: 2.65 Pounds

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.

More Info

Easy Heat AHB 12 ft. L Heating Cable For Water Pipe

Search only Easy Heat brand name
Easy Heat AHB 12 ft. L Heating Cable For Water Pipe

Current price: 32.32 USD

Saving: $8.33 (20%)


Check price and availability


Height: 9 Inches

Length: 1.3 Inches

Width: 7.8 Inches

Weight: 0.8 Pounds

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable

More Info

Easy Heat AHB-019 Cold Weather Valve and Pipe Heating Cable, 9 feet

Search only Easy Heat brand name
Easy Heat AHB-019 Cold Weather Valve and Pipe Heating Cable, 9 feet

Current price: 26.29 USD

Saving: $3.70 (12%)


Check price and availability


Height: 0.12 Inches

Length: 108 Inches

Width: 0.12 Inches

Weight: 0.75 Pounds

Warranty: N

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable

More Info

HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

Search only HEATIT brand name
HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

Current price: 111.99 USD


Check price and availability


Weight: 2.6 Pounds

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.

More Info

M-D Building Products 64444 Md Pipe Heating Cable With Thermostat, 30 Ft, -50 Deg F, 1 Pack, Orange

Search only M-D Building Products brand name
M-D Building Products 64444 Md Pipe Heating Cable With Thermostat, 30 Ft, -50 Deg F, 1 Pack, Orange

Current price: 25 USD

Saving: $12.95 (34%)


Check price and availability


Height: 12 Inches

Length: 12 Inches

Width: 7.5 Inches

Weight: 0.55 Pounds

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit

More Info

Wrap-On Pipe Heating Cable - 100-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31100

Search only Wrap-On brand name
Wrap-On Pipe Heating Cable - 100-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31100

Current price: 94.73 USD


Check price and availability


Height: 0.5 Inches

Length: 1200 Inches

Width: 2 Inches

Weight: 5 Pounds

Warranty: 2 year manufacturer

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.

More Info

M-D Building Products 4309 Pipe Heating Cable with Thermostat, 3-Foot

Search only M-D Building Products brand name
M-D Building Products 4309 Pipe Heating Cable with Thermostat, 3-Foot

Current price: 19.89 USD


Check price and availability


Height: 3.67 Inches

Length: 24.61 Inches

Width: 5.45 Inches

Weight: 0.44 Pounds

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Built in thermostat
  • Available in 6 different lengths
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50°F
  • This product is manufactured in China
  • Purpose of use for Rough Plumbing, pipe-heat-cables
  • This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat

More Info

Mobile Home 100' Easy Heat Braid Self Regulate Water Line Freeze-Free Protection Includes Four (4) Plug Kits

Search only Easy Heat brand name
Mobile Home 100' Easy Heat Braid Self Regulate Water Line Freeze-Free Protection Includes Four (4) Plug Kits

Current price: 209.95 USD


Check price and availability


  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Built in thermostat
  • Available in 6 different lengths
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50°F
  • This product is manufactured in China
  • Purpose of use for Rough Plumbing, pipe-heat-cables
  • This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat

More Info

Heat Cable for Pipe Freeze Protection, 100 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

Search only Radiant Solutions Company brand name
Heat Cable for Pipe Freeze Protection, 100 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

Current price: 169.95 USD


Check price and availability


  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Built in thermostat
  • Available in 6 different lengths
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50°F
  • This product is manufactured in China
  • Purpose of use for Rough Plumbing, pipe-heat-cables
  • This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FIVE YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.

More Info

Prime Wire & Cable PHC42W06 DE-ICING CABLE WATER PIPE FREEZE PROTECTION

Search only Prime Wire & Cable brand name
Prime Wire & Cable PHC42W06 DE-ICING CABLE WATER PIPE FREEZE PROTECTION

Current price: 21.2 USD


Check price and availability


Height: 7.2 Inches

Length: 1.97 Inches

Width: 7.28 Inches

  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For Use With Plastic Or Metal Pipe
  • Total: 84W Or .70A
  • Heats To 7W Per Foot
  • Surface Mounted Snap Action Thermostat Activates Heat Only When Needed
  • Automatic Pipe Heating Cable
  • 9-feet heated section
  • 120 volts AC
  • 63 watts
  • Tough PVC inner insulation
  • Heat cable
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • Includes built in thermostat
  • Available in 6 different lengths; Cables colors may vary
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50-degrees Fahrenheit
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Built in thermostat
  • Available in 6 different lengths
  • Sensor light shows thermostat is working
  • Easy to install just "wrap around" application
  • Prevents frozen water pipes to -50°F
  • This product is manufactured in China
  • Purpose of use for Rough Plumbing, pipe-heat-cables
  • This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FIVE YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Materials required (not included) aluminum foil (recommended for plastic pipe); fiberglass Plumbing pipe insulation; fiberglass tape or similar with temperature rating 80 degrees C/175F or higher
  • Built-in thermostat automatically turns on at 40°f/4°c
  • Stops metal and plastic pipes from freezing down to -40°f/-40°c
  • 6 ft. Black water pipe heating cable, 42 watt

More Info

1    2    3    4    5    6    7    8    9    10