High rated Water Pipe Heat Cables. Reviews August, 2021, page 1

Frost King HC30A Heating Cables, 30 Feet, Black

More from Tools & Home Improvement
Search only Frost King brand name
Frost King HC30A Heating Cables, 30 Feet, Black

Current price: 27.73 USD


Check price and availability


Height: 1.5 Inches

Length: 9.5 Inches

Width: 8.5 Inches

Weight: 1.5 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes

More Info

Frost King HC24A Automatic Electric Heat Kits, 24ft x 120V x 7 Watts/ft, 24 Feet, Black Heating Cables

More from Tools & Home Improvement
Search only Frost King brand name
Frost King HC24A Automatic Electric Heat Kits, 24ft x 120V x 7 Watts/ft, 24 Feet, Black Heating Cables

Current price: 15.77 USD

Saving: $17.23 (52%)


Check price and availability


Height: 1.25 inches

Length: 10.5 inches

Width: 9.25 inches

Weight: 1.3 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.

More Info

Frost King HC12A Heating Cables, 12 Feet, Black, Ft

More from Tools & Home Improvement
Search only Frost King brand name
Frost King HC12A Heating Cables, 12 Feet, Black, Ft

Current price: 9.02 USD

Saving: $10.35 (53%)


Check price and availability


Height: 1.5 inches

Length: 7 inches

Width: 8 inches

Weight: 0.846875 Pounds

Warranty: 1 Year

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot

More Info

Frost King HC6A 6 Feet Automatic Electric Heat Cable Kits, Black

More from Tools & Home Improvement
Search only Frost King brand name
Frost King HC6A 6 Feet Automatic Electric Heat Cable Kits, Black

Current price: 24.97 USD


Check price and availability


Height: 1.25 Inches

Length: 8.75 Inches

Width: 7.63 Inches

Weight: 0.61875 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.

More Info

HEATIT HISD 6-feet Pipe Heating Cable with Built-in Thermostat, Black

More from Tools & Home Improvement
Search only HEATIT brand name
HEATIT HISD 6-feet Pipe Heating Cable with Built-in Thermostat, Black

Current price: 20.99 USD

Saving: $2.00 (9%)


Check price and availability


Height: 28 Inches

Length: 5 Inches

Width: 19 Inches

Weight: 0.37 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.

More Info

HEATIT JHSF 30-feet 120V Regulating Pre-assembled Pipe Cable

More from Tools & Home Improvement
Search only HEATIT brand name
HEATIT JHSF 30-feet 120V Regulating Pre-assembled Pipe Cable

Current price: 40.99 USD


Check price and availability


Height: 4 inches

Length: 31 inches

Width: 4 inches

Weight: 1.28 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.

More Info

Thermwell Products HC18 Pipe Heat Cable 18 ft.

More from Tools & Home Improvement
Search only Frost King brand name
Thermwell Products HC18 Pipe Heat Cable 18 ft.

Current price: 29.55 USD


Check price and availability


Height: 1.4 inches

Length: 19.5 inches

Width: 18.5 inches

Weight: 1 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.

More Info

EasyHeat 2102 Freeze Free Heating Cable - 100'

More from Tools & Home Improvement
Search only Easy Heat brand name
EasyHeat 2102 Freeze Free Heating Cable - 100'

Current price: 145.99 USD


Check price and availability


Height: 2.8 inches

Length: 8.9 inches

Width: 8.6 inches

Weight: 4 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system

More Info

Wrap-On Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003 , Green

More from Tools & Home Improvement
Search only Wrap-On brand name
Wrap-On Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003 , Green

Current price: 22.99 USD


Check price and availability


Height: 0.5 inches

Length: 36 inches

Width: 2 inches

Weight: 0.4 Pounds

Warranty: 2 year manufacturer

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.

More Info

Frost King HC3A Heating Cables, 3 Feet, Black

More from Tools & Home Improvement
Search only Frost King brand name
Frost King HC3A Heating Cables, 3 Feet, Black

Current price: 23.24 USD


Check price and availability


Height: 1.25 inches

Length: 8.75 inches

Width: 7.5 inches

Weight: 0.515625 Pounds

  • 120V, 7 Watts per foot.
  • Easy to install
  • For use on 2 in. metal and plastic water pipes.
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 24Ft x 120V x 7W/ft.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 12 feet, 120V, 7 Watts per foot
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 6Ft x 120V x 7W/ft.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • 3Ft x 120V x 7W/ft

More Info

1    2    3    4    5    6    7    8    9    10