Great Voltage Testers. Reviews September, 2021, page 4

Non Contact Voltage Tester Upgraded AC Electricity Detect Pen 12V-1000V/48V-1000V with Multi Indicator LCD Display, Flashlight, Buzzer Alarm for Wire Break-Point Finder IE01

Search only idoorythe brand name
Non Contact Voltage Tester Upgraded AC Electricity Detect Pen 12V-1000V/48V-1000V with Multi Indicator LCD Display, Flashlight, Buzzer Alarm for Wire Break-Point Finder IE01

Current price: 8.99 USD

Saving: $1.00 (10%)


Check price and availability


Height: 1.1 Inches

Length: 6.5 Inches

Width: 1.4 Inches

Weight: 0.13125 Pounds

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength

More Info

Sperry Instruments VD7504GFI DualCheck 2-in-1 Non-Contact Voltage Detector + GFCI Outlet Circuit Analyzer, 360° Visual & Audible Indicators, 50-1000V AC, 250 lb. Crush Rating

Search only Sperry Instruments brand name
Sperry Instruments VD7504GFI DualCheck 2-in-1 Non-Contact Voltage Detector + GFCI Outlet Circuit Analyzer, 360° Visual & Audible Indicators, 50-1000V AC, 250 lb. Crush Rating

Current price: 24.84 USD


Check price and availability


Height: 0.6 Inches

Length: 8.4 Inches

Width: 3.7 Inches

Weight: 0.02 Pounds

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other

More Info

Non-Contact Voltage Tester, AC Voltage Detector Pen, Circuit Tester Tool for Live Live/Null Wire Judgment, Sound and Light Alarm, LED Flashlight, Dual Range AC 12V/48V~1000V, Urwise 2021 Upgrade-VD11

Search only Urwise brand name
Non-Contact Voltage Tester, AC Voltage Detector Pen, Circuit Tester Tool for Live Live/Null Wire Judgment, Sound and Light Alarm, LED Flashlight, Dual Range AC 12V/48V~1000V, Urwise 2021 Upgrade-VD11

Current price: 5.77 USD


Check price and availability


Height: 0.9842519675 Inches

Length: 6.299212592 Inches

Width: 0.9842519675 Inches

Weight: 0.10141264052 Pounds

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅

More Info

Klein Tools NCVT-2 Voltage Tester, Non-Contact Dual Range Voltage Tester Pen for Standard and Low Voltage, with 3 m Drop Protection

Search only Klein Tools brand name
Klein Tools NCVT-2 Voltage Tester, Non-Contact Dual Range Voltage Tester Pen for Standard and Low Voltage, with 3 m Drop Protection

Current price: 30 USD


Check price and availability


Height: 2.362204722 Inches

Length: 7.086614166 Inches

Width: 3.149606296 Inches

Weight: 0.05 Pounds

Warranty: 2 year warranty from the date of purchase.

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application

More Info

AstroAI Digital Multimeter, Voltmeter 1.5v/9v/12v Battery Voltage Tester Auto-Ranging/Ohmmeter/DMM with Non-Contact Voltage Function, Accurately Measures Voltage Current Amp Resistance Capacitance

Search only AstroAI brand name
AstroAI Digital Multimeter, Voltmeter 1.5v/9v/12v Battery Voltage Tester Auto-Ranging/Ohmmeter/DMM with Non-Contact Voltage Function, Accurately Measures Voltage Current Amp Resistance Capacitance

Current price: 18.99 USD

Saving: $3.22 (14%)


Check price and availability


Height: 1.5748 Inches

Length: 6.2992 Inches

Width: 4.52755 Inches

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)

More Info

ENGiNDOT Non-Contact AC Voltage Tester, Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Live/Null Wire /Circuit Tester, Electrical Tester with LCD Display, Buzzer & Light Alarm

Search only ENGINDOT brand name
ENGiNDOT Non-Contact AC Voltage Tester, Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Live/Null Wire /Circuit Tester, Electrical Tester with LCD Display, Buzzer & Light Alarm

Current price: 19.99 USD

Saving: $4.00 (17%)


Check price and availability


Height: 0.787401574 Inches

Length: 6.299212592 Inches

Width: 0.9842519675 Inches

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
  • 💫[Clear LCD & Low Battery Indicator]- When the voltmeter is testing the voltage, the brightness bar on the screen will tell you the voltage intensity; the screen will light up in red or green to distinguish the live or null wire; when the battery voltage is lower than 2.5 V, LED display flashlight reminds you to replace the battery. We provide 24-Month after-sale service, please feel free to contact us if you have any concerns.
  • 💫[Automatic Shut Down & Portable Pencil Hook]- The electricity tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off after 3 minutes without operation or signal detection to extend battery life and save energy. What's more, the portable pencil pen hook allows you to carry it in your pocket.
  • 💫[Buzzer Alarm & LED Flashlight]- The LED flashlight with high brightness and low power consumption can illuminate your workspace in the dark. In addition, the lighting lamp and the probe are combined, which is convenient for you to measure. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly.
  • 💫[Adjustable Sensitivity & Dual Range Tester]- The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and internal wiring detection (depth ≤ 1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate the voltage level.
  • 💫[Non-Contact & Safety]- The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.

More Info

Non Contact Voltage Tester, Voltage/Electric Detector Tester with Phase Sequence Tester, LCD Display, Buzzer, Dual Range 12V-1000V/48V-1000V,Live/Null Wire Judgment & Breakpoint Detect AC voltage

Search only Pumpkino brand name
Non Contact Voltage Tester, Voltage/Electric Detector Tester with Phase Sequence Tester, LCD Display, Buzzer, Dual Range 12V-1000V/48V-1000V,Live/Null Wire Judgment & Breakpoint Detect AC voltage

Current price: 9.99 USD


Check price and availability


  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
  • 💫[Clear LCD & Low Battery Indicator]- When the voltmeter is testing the voltage, the brightness bar on the screen will tell you the voltage intensity; the screen will light up in red or green to distinguish the live or null wire; when the battery voltage is lower than 2.5 V, LED display flashlight reminds you to replace the battery. We provide 24-Month after-sale service, please feel free to contact us if you have any concerns.
  • 💫[Automatic Shut Down & Portable Pencil Hook]- The electricity tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off after 3 minutes without operation or signal detection to extend battery life and save energy. What's more, the portable pencil pen hook allows you to carry it in your pocket.
  • 💫[Buzzer Alarm & LED Flashlight]- The LED flashlight with high brightness and low power consumption can illuminate your workspace in the dark. In addition, the lighting lamp and the probe are combined, which is convenient for you to measure. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly.
  • 💫[Adjustable Sensitivity & Dual Range Tester]- The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and internal wiring detection (depth ≤ 1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate the voltage level.
  • 💫[Non-Contact & Safety]- The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.
  • 【Buzzer Alarm & LED Flashlight& Auto Shutdown】 - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; The lighting lamp and the probe are combined together, convenient for measuring; The buzzer alarm is loud;Triple alarms of sound, light and screen display for testing ; After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down。
  • 【High-Definition LCD Screen & Low Battery Indicator】 - When testing the voltage, the brightness bar on the screen will show the voltage intensity; The screen will light up in red or green to distinguish the Live/Null Wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery
  • 【Adjustable Sensitivity & Dual Range Testing】 - Adjustable sensitivity makes its measurement more sensitive and flexible; The Voltage Tester Pen has the dual testing range(12-1000V AC or 48-1000V AC); Automatic Recognition of Voltage Intensity; In using, the NVC sensor of probe can automatically identify the voltage and show it on the LCD screen, simple and clear
  • 【Phase Sequence Tester】After testing three phase lines,the screen displays the results,“R”shows positive phase sequence, “L”shows negative phase sequence, otherwise it`s phase loss.
  • 【Non-Contact & Safe Voltage Tester】 - Please press the power button for 2 seconds to switch it on. Testing can be achieved without physical contact for its NCV Inductive Probe; Insulation operation ensures the safety of testing; In testing AC voltage, it can automatically detect the live wire or null wire; Intelligently identify Electric Field; In the vicinity of the voltage to be tested, the pen will give a buzzer alarm;Safety Compliance:CAT.III 1000V CAT.IV 600V;CE

More Info

Milwaukee 2202-20 Voltage Detector with LED Light

Search only MILWAUKEE'S brand name
Milwaukee 2202-20 Voltage Detector with LED Light

Current price: 23.15 USD

Saving: $2.85 (11%)


Check price and availability


Height: 1 Inches

Length: 2 Inches

Width: 8 Inches

Weight: 0.19 Pounds

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
  • 💫[Clear LCD & Low Battery Indicator]- When the voltmeter is testing the voltage, the brightness bar on the screen will tell you the voltage intensity; the screen will light up in red or green to distinguish the live or null wire; when the battery voltage is lower than 2.5 V, LED display flashlight reminds you to replace the battery. We provide 24-Month after-sale service, please feel free to contact us if you have any concerns.
  • 💫[Automatic Shut Down & Portable Pencil Hook]- The electricity tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off after 3 minutes without operation or signal detection to extend battery life and save energy. What's more, the portable pencil pen hook allows you to carry it in your pocket.
  • 💫[Buzzer Alarm & LED Flashlight]- The LED flashlight with high brightness and low power consumption can illuminate your workspace in the dark. In addition, the lighting lamp and the probe are combined, which is convenient for you to measure. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly.
  • 💫[Adjustable Sensitivity & Dual Range Tester]- The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and internal wiring detection (depth ≤ 1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate the voltage level.
  • 💫[Non-Contact & Safety]- The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.
  • 【Buzzer Alarm & LED Flashlight& Auto Shutdown】 - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; The lighting lamp and the probe are combined together, convenient for measuring; The buzzer alarm is loud;Triple alarms of sound, light and screen display for testing ; After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down。
  • 【High-Definition LCD Screen & Low Battery Indicator】 - When testing the voltage, the brightness bar on the screen will show the voltage intensity; The screen will light up in red or green to distinguish the Live/Null Wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery
  • 【Adjustable Sensitivity & Dual Range Testing】 - Adjustable sensitivity makes its measurement more sensitive and flexible; The Voltage Tester Pen has the dual testing range(12-1000V AC or 48-1000V AC); Automatic Recognition of Voltage Intensity; In using, the NVC sensor of probe can automatically identify the voltage and show it on the LCD screen, simple and clear
  • 【Phase Sequence Tester】After testing three phase lines,the screen displays the results,“R”shows positive phase sequence, “L”shows negative phase sequence, otherwise it`s phase loss.
  • 【Non-Contact & Safe Voltage Tester】 - Please press the power button for 2 seconds to switch it on. Testing can be achieved without physical contact for its NCV Inductive Probe; Insulation operation ensures the safety of testing; In testing AC voltage, it can automatically detect the live wire or null wire; Intelligently identify Electric Field; In the vicinity of the voltage to be tested, the pen will give a buzzer alarm;Safety Compliance:CAT.III 1000V CAT.IV 600V;CE
  • The product is highly durable
  • The product is easy to use and easy to handle
  • Voltage Detector W/Led Light

More Info

Wintact Non-Contact AC Voltage Detector Pen, Dual Range, Adjustable Sensitivity, Electricity Live/Null Wire Breakpoint Tester with Flashlight and Buzzer Beeper Alarm Indicator

Search only Wintact brand name
Wintact Non-Contact AC Voltage Detector Pen, Dual Range, Adjustable Sensitivity, Electricity Live/Null Wire Breakpoint Tester with Flashlight and Buzzer Beeper Alarm Indicator

Current price: 6.99 USD


Check price and availability


Height: 1 Inches

Length: 6.4 Inches

Width: 1.3 Inches

Weight: 0.050625 Pounds

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
  • 💫[Clear LCD & Low Battery Indicator]- When the voltmeter is testing the voltage, the brightness bar on the screen will tell you the voltage intensity; the screen will light up in red or green to distinguish the live or null wire; when the battery voltage is lower than 2.5 V, LED display flashlight reminds you to replace the battery. We provide 24-Month after-sale service, please feel free to contact us if you have any concerns.
  • 💫[Automatic Shut Down & Portable Pencil Hook]- The electricity tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off after 3 minutes without operation or signal detection to extend battery life and save energy. What's more, the portable pencil pen hook allows you to carry it in your pocket.
  • 💫[Buzzer Alarm & LED Flashlight]- The LED flashlight with high brightness and low power consumption can illuminate your workspace in the dark. In addition, the lighting lamp and the probe are combined, which is convenient for you to measure. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly.
  • 💫[Adjustable Sensitivity & Dual Range Tester]- The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and internal wiring detection (depth ≤ 1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate the voltage level.
  • 💫[Non-Contact & Safety]- The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.
  • 【Buzzer Alarm & LED Flashlight& Auto Shutdown】 - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; The lighting lamp and the probe are combined together, convenient for measuring; The buzzer alarm is loud;Triple alarms of sound, light and screen display for testing ; After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down。
  • 【High-Definition LCD Screen & Low Battery Indicator】 - When testing the voltage, the brightness bar on the screen will show the voltage intensity; The screen will light up in red or green to distinguish the Live/Null Wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery
  • 【Adjustable Sensitivity & Dual Range Testing】 - Adjustable sensitivity makes its measurement more sensitive and flexible; The Voltage Tester Pen has the dual testing range(12-1000V AC or 48-1000V AC); Automatic Recognition of Voltage Intensity; In using, the NVC sensor of probe can automatically identify the voltage and show it on the LCD screen, simple and clear
  • 【Phase Sequence Tester】After testing three phase lines,the screen displays the results,“R”shows positive phase sequence, “L”shows negative phase sequence, otherwise it`s phase loss.
  • 【Non-Contact & Safe Voltage Tester】 - Please press the power button for 2 seconds to switch it on. Testing can be achieved without physical contact for its NCV Inductive Probe; Insulation operation ensures the safety of testing; In testing AC voltage, it can automatically detect the live wire or null wire; Intelligently identify Electric Field; In the vicinity of the voltage to be tested, the pen will give a buzzer alarm;Safety Compliance:CAT.III 1000V CAT.IV 600V;CE
  • The product is highly durable
  • The product is easy to use and easy to handle
  • Voltage Detector W/Led Light
  • Safe sound and light alarm - Distinguish voltage frequency by buzzer and LED indicator. Its sound is enough to hear the noise of medium machinery
  • LED light & low voltage indicator light - low voltage LED and alarm light prompts can remind you to replace the battery in time, the white LED light can work normally in the dark environment; no automatic operation for 5 minutes to save energy
  • Non-contact voltage tester - When the device is close to the AC voltage within the specified voltage range, it will emit a LED light and beep sound without touching the object under test to support adequate safety measurement applications
  • Different voltage test and dual range test - electric wire and zero line can be distinguished by different frequency of alarm sounds; the default AC voltage measurement range is 48-1000V, and 12-1000V can also be measured by adjusting the sensitivity, to meet the need to select the most suitable sensitivity before testing in different occasions and different objects;
  • Adjustable sensitivity: Dual range AC 12V- 1000V / 48V- 1000V, choose different ranges according to your needs

More Info

IDEAL INDUSTRIES INC. 61-065 Vol-Test Voltage Tester, CATIII for 600v

Search only Ideal Industries brand name
IDEAL INDUSTRIES INC. 61-065 Vol-Test Voltage Tester, CATIII for 600v

Current price: 54.89 USD


Check price and availability


Height: 10 Inches

Length: 5 Inches

Width: 5 Inches

Weight: 0.88 Pounds

Warranty: 2 year manufacturer

  • Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery
  • Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment
  • Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity
  • Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal
  • Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
  • INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
  • DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
  • SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
  • 5⃣Auto Power Off & Portable Pencil Hook - After about 5 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily✅
  • 4⃣Sound and Light Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; In the vicinity of the voltage to be tested, the pen will give LED Flash/Buzzer Alarm✅
  • 3⃣Easily read test results show - Place the probe near a live wire or plug it into a power outlet, Judge voltage intensity according to acousto-optic alarm; High Test Voltage, Red light H M L light up, Sound of a fast buzzer; Medium Test Voltage, Red light M L light up, Medium Buzzer Voice; Low Test Voltage, Red light L light up, Slow Buzzer Voice✅
  • 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S button to switch the AC voltage range between 12V~1000V and 48V~1000V✅
  • 1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.
  • TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
  • PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
  • NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
  • VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
  • 💫[Clear LCD & Low Battery Indicator]- When the voltmeter is testing the voltage, the brightness bar on the screen will tell you the voltage intensity; the screen will light up in red or green to distinguish the live or null wire; when the battery voltage is lower than 2.5 V, LED display flashlight reminds you to replace the battery. We provide 24-Month after-sale service, please feel free to contact us if you have any concerns.
  • 💫[Automatic Shut Down & Portable Pencil Hook]- The electricity tester uses 2 * 1.5 V AAA batteries (included), which will automatically Power Off after 3 minutes without operation or signal detection to extend battery life and save energy. What's more, the portable pencil pen hook allows you to carry it in your pocket.
  • 💫[Buzzer Alarm & LED Flashlight]- The LED flashlight with high brightness and low power consumption can illuminate your workspace in the dark. In addition, the lighting lamp and the probe are combined, which is convenient for you to measure. In addition, the sound, light, and screen display triple alarms, and the voltmeter buzzer alarms loudly, allowing you to feel the voltage visually and audibly.
  • 💫[Adjustable Sensitivity & Dual Range Tester]- The multimeter accurately detects standard and low voltage (12-1000V AC / 48-1000V AC), which is more sensitive and flexible. Low sensitivity can probe power supply lines such as power boards, desk lamps, computers, etc., and high sensitivity can detect buried walls and internal wiring detection (depth ≤ 1.18 inches). The electronic pen can beep from low, medium, and high frequency to indicate the voltage level.
  • 💫[Non-Contact & Safety]- The voltage tester pen detects voltage in a non-contact way, and insulation operation can ensure the safety of testers. Safety Compliance: CAT.III 1000V CAT.IV 600V; CE, FCC.
  • 【Buzzer Alarm & LED Flashlight& Auto Shutdown】 - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; The lighting lamp and the probe are combined together, convenient for measuring; The buzzer alarm is loud;Triple alarms of sound, light and screen display for testing ; After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down。
  • 【High-Definition LCD Screen & Low Battery Indicator】 - When testing the voltage, the brightness bar on the screen will show the voltage intensity; The screen will light up in red or green to distinguish the Live/Null Wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery
  • 【Adjustable Sensitivity & Dual Range Testing】 - Adjustable sensitivity makes its measurement more sensitive and flexible; The Voltage Tester Pen has the dual testing range(12-1000V AC or 48-1000V AC); Automatic Recognition of Voltage Intensity; In using, the NVC sensor of probe can automatically identify the voltage and show it on the LCD screen, simple and clear
  • 【Phase Sequence Tester】After testing three phase lines,the screen displays the results,“R”shows positive phase sequence, “L”shows negative phase sequence, otherwise it`s phase loss.
  • 【Non-Contact & Safe Voltage Tester】 - Please press the power button for 2 seconds to switch it on. Testing can be achieved without physical contact for its NCV Inductive Probe; Insulation operation ensures the safety of testing; In testing AC voltage, it can automatically detect the live wire or null wire; Intelligently identify Electric Field; In the vicinity of the voltage to be tested, the pen will give a buzzer alarm;Safety Compliance:CAT.III 1000V CAT.IV 600V;CE
  • The product is highly durable
  • The product is easy to use and easy to handle
  • Voltage Detector W/Led Light
  • Safe sound and light alarm - Distinguish voltage frequency by buzzer and LED indicator. Its sound is enough to hear the noise of medium machinery
  • LED light & low voltage indicator light - low voltage LED and alarm light prompts can remind you to replace the battery in time, the white LED light can work normally in the dark environment; no automatic operation for 5 minutes to save energy
  • Non-contact voltage tester - When the device is close to the AC voltage within the specified voltage range, it will emit a LED light and beep sound without touching the object under test to support adequate safety measurement applications
  • Different voltage test and dual range test - electric wire and zero line can be distinguished by different frequency of alarm sounds; the default AC voltage measurement range is 48-1000V, and 12-1000V can also be measured by adjusting the sensitivity, to meet the need to select the most suitable sensitivity before testing in different occasions and different objects;
  • Adjustable sensitivity: Dual range AC 12V- 1000V / 48V- 1000V, choose different ranges according to your needs
  • Manufacturer: Ideal
  • Country of manufacture: United States
  • Test Instruments & Gauges

More Info

1    2    3    4    5    6    7    8    9    10