Elegant Voltage Testers. Reviews September, 2021, page 10

uxcell Voltage Tester AC 100-500V with 3mm Slotted Screwdriver with Clip for Circuit Test, Clear, Pack of 3

Search only uxcell brand name
uxcell Voltage Tester AC 100-500V with 3mm Slotted Screwdriver with Clip for Circuit Test, Clear, Pack of 3

Current price: 10.29 USD


Check price and availability


Height: 0.79 Inches

Length: 5.12 Inches

Width: 1.18 Inches

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)

More Info

Edward Tools Harden Pro Non Contact Voltage Detector - Flashlight Tip - Electrical Volt Detector Pen for 90V -1000V - Auto Shutdown - LED Light/Buzzer Alarm - Batteries Included (1)

Search only Edward Tools brand name
Edward Tools Harden Pro Non Contact Voltage Detector - Flashlight Tip - Electrical Volt Detector Pen for 90V -1000V - Auto Shutdown - LED Light/Buzzer Alarm - Batteries Included (1)

Current price: 5.95 USD


Check price and availability


  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences

More Info

Automotive Circuit Tester, Test Light Automotive 3-24 Volt DC Voltage Tester, Dual Probes PU Antifreeze Cable Big Alligator Clip Two-Way Voltage Test, Testing Circuit Low Voltage System,HOLYSHINE

Search only HOLYSHINE brand name
Automotive Circuit Tester, Test Light Automotive 3-24 Volt DC Voltage Tester, Dual Probes PU Antifreeze Cable Big Alligator Clip Two-Way Voltage Test, Testing Circuit Low Voltage System,HOLYSHINE

Current price: 10.99 USD


Check price and availability


Height: 1 Inches

Length: 7 Inches

Width: 2.3 Inches

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.

More Info

USB Tester USB Voltage Meter with Bluetooth PD Trigger Voltmeter USB 3.0 Voltage and Current Tester 4-24V 6.5A USB C Multimeter PPS Fast Charging Protocol QC2.0 3.0 FNB48

Search only MakerHawk brand name
USB Tester USB Voltage Meter with Bluetooth PD Trigger Voltmeter USB 3.0 Voltage and Current Tester 4-24V 6.5A USB C Multimeter PPS Fast Charging Protocol QC2.0 3.0 FNB48

Current price: 46.59 USD


Check price and availability


Weight: 0.06834330122 Pounds

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.

More Info

Charger Doctor Digital Multimeter USB Tester Current Voltage Meter Detector Battery Monitor with Dual Outputs for Solar Panel Chargers Cables &Other USB Devices Troubleshooting Tools and Gadgets

Search only Homern brand name
Charger Doctor Digital Multimeter USB Tester Current Voltage Meter Detector Battery Monitor with Dual Outputs for Solar Panel Chargers Cables &Other USB Devices Troubleshooting Tools and Gadgets

Current price: 8.99 USD


Check price and availability


  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others

More Info

Amprobe-2734332 VP-440 Non-Contact Voltage Detector

Search only Amprobe brand name
Amprobe-2734332 VP-440 Non-Contact Voltage Detector

Current price: 30.99 USD


Check price and availability


Height: 1.3 Inches

Length: 8 Inches

Width: 4 Inches

Weight: 0.0440924524 Pounds

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others
  • Safety rated to European Standard 61010-031 Category III 1000V
  • Measures AC voltage from 50 to 1000V
  • Tester illuminates when AC voltage is detected
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform
  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring

More Info

Ideal Industries 61-025 VoltAware Non-Contact Voltage Tester, Yellow

Search only Ideal Industries brand name
Ideal Industries 61-025 VoltAware Non-Contact Voltage Tester, Yellow

Current price: 33.4 USD


Check price and availability


Height: 1.45 Inches

Length: 10 Inches

Width: 5.2 Inches

Weight: 0.15 Pounds

Warranty: 2 YEARS

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others
  • Safety rated to European Standard 61010-031 Category III 1000V
  • Measures AC voltage from 50 to 1000V
  • Tester illuminates when AC voltage is detected
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform
  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring
  • CLEAR VOLTAGE INDICATION: Indicates presence of voltage from 40-1000VAC. A green light informs you the VoltAware is on and ready, while a bright flashing red light alerts you to voltage presence. The audible indicator gives you the option to turn the sound on or off in sensitive environments.
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement - with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries.
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job.
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically. Twist the tester body to the Off position, then back to On to reactivate.
  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables.

More Info

Extech ET10 GFCI Receptacle Tester

Search only Extech brand name
Extech ET10 GFCI Receptacle Tester

Current price: 12.99 USD


Check price and availability


Height: 3.3 Inches

Length: 1.25 Inches

Width: 1.25 Inches

Weight: 0.1 Pounds

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others
  • Safety rated to European Standard 61010-031 Category III 1000V
  • Measures AC voltage from 50 to 1000V
  • Tester illuminates when AC voltage is detected
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform
  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring
  • CLEAR VOLTAGE INDICATION: Indicates presence of voltage from 40-1000VAC. A green light informs you the VoltAware is on and ready, while a bright flashing red light alerts you to voltage presence. The audible indicator gives you the option to turn the sound on or off in sensitive environments.
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement - with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries.
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job.
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically. Twist the tester body to the Off position, then back to On to reactivate.
  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables.
  • 3-prong plug
  • Lights indicate circuit condition
  • Checks for faulty wiring in 3-wire receptacles
  • Tests GFCI circuits

More Info

Milwaukee 2202-20A Voltage Detector with LED 2-Pack

Search only Milwaukee brand name
Milwaukee 2202-20A Voltage Detector with LED 2-Pack

Current price: 49.95 USD


Check price and availability


Height: 8.7 Inches

Length: 2.7 Inches

Width: 1 Inches

Weight: 0.3086471668 Pounds

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others
  • Safety rated to European Standard 61010-031 Category III 1000V
  • Measures AC voltage from 50 to 1000V
  • Tester illuminates when AC voltage is detected
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform
  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring
  • CLEAR VOLTAGE INDICATION: Indicates presence of voltage from 40-1000VAC. A green light informs you the VoltAware is on and ready, while a bright flashing red light alerts you to voltage presence. The audible indicator gives you the option to turn the sound on or off in sensitive environments.
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement - with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries.
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job.
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically. Twist the tester body to the Off position, then back to On to reactivate.
  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables.
  • 3-prong plug
  • Lights indicate circuit condition
  • Checks for faulty wiring in 3-wire receptacles
  • Tests GFCI circuits

More Info

NSi Industries TES-111 Twin Probe Voltage Tester, 80-250 VAC

Search only NSI brand name
NSi Industries TES-111 Twin Probe Voltage Tester, 80-250 VAC

Current price: 4.46 USD


Check price and availability


Height: 2.5 Inches

Length: 7.5 Inches

Width: 2.5 Inches

  • Note: DO NOT touch the voltage tester probe
  • How to Use: When using the voltage tester, please insert the screwdriver to the bottom, hold the insulated handle with the thumb and middle fingers, and hold the cap at the end of the voltage tester with your forefinger
  • The voltage tester pen is used for testing the circuit and distinguishing whether the object is electrified; The higher the voltage, the brighter the neon tube light
  • Screwdriver Head Width: 3mm / 0.12 Inch; It can work as a circuit tester or a screwdriver, makes work more convenient
  • Voltage: AC 100-500V; Overall Size: 141 x 15mm /5.56 x 0.6 Inch(L*D)
  • ifetime Warranty - We guarantee this voltage tester tool for life
  • Auto Power off when not in use after two minutes. Batteries included
  • Flashlight Tip can illuminate dark working area
  • Volt Detector pen has bright green LED light to show tester is on. Bright red LED and alarm will flash and warning sound when power is detected
  • Voltage Tester with non contact detects power voltage in wires, cables, circuit breakers, lights, outlets, electric fences
  • 【CUSTOMER SATISFACTION】: Please Let Us Know If There Is Anything We Can Do to Help You If You Are Not Satisfied.
  • 【BIDIRECTIONAL TESTING】: Alligator Clamps of Circuit Breaker Tester Can Be Connected to Either Negative or Positive Ground, With the Probe Touching the Other Side. During Positive Connection, The Red Led Will Be On, And During Negative Connection, The Green Led Will Be On.
  • 【TESTER LIGHT BULB】: This LED test light circuit tester bulb has high visibility and long service life. It can indicate the state of the circuit. The brightness of the top 3W lamp can be changed with the measured voltage and can be replaced.
  • 【WIDE APPLICATIONS】: 3-24V Automotive Screwdriver Test Light, Widely Used Circuit Test, Excellent for Various Circuits on Automobiles, This Automotive Tester Can Also Be Used for Other 6-24V Circuit Test, Including Battery Test, Headlight Test, Brake Light Test, Fault Connections and Injector Signal Test.
  • 【PREMIUM QUALITY】: Automotive Circuit Tester Probe Made of Steel, Used for Threading, With A Large Alligator Clip for Convenient One-Handed Operation. Also, It Can Reach Tight Areas That Are Hard to Reach. ABS Body Provides Superior Durability Over Other Products, As It Is Shatter-Resistant. A Top-Of-The-Line 47-Inch PU Wire That Provides Heat Insulation, Wear Resistance, And Tensile Strength to Test Light for car.
  • GRAVITY SENSING SCREEN AUTOMATICALLY FLIPS: The screen of FNB48 can be flipped freely trough gravity sensing, you can also turn offthe gravity direction recognition, long press the middle button to realize the screen flip. In any interface, by long pressing the return button, the screen can be hibernated, wake up by any operation, and charging at night will not affect sleep.
  • PD E-MARKER, DASH CABLE INSPECTION: FNB48 supports reading the data of E-Marker and DASH cables. After connecting the data cable, it is easy to read the chips of E-Marker and DASH cables. With analog DASH cable and A-pple 2.4A acceleration function, it can directly charge and detect voltage and current without the original data cable.
  • RECORD MORE DATA: FNB48 can record up to 10 sets of measurement data. It could directly put the calculation formula of battery capacity on the tester. The calculation result is multiplied by 1000 to get the capacity of the battery, and the calculation is more convenient and faster.
  • FASTER TRANSMISSION RATE WITH USB 3.0: FNB48 uses USB3.0 interface, 9-pin pin design, compatible with USB2.0, transmission rate is 10 times that of USB2.0, and more energy-saving. Protocol detection triggers the upgrade, wider application areas. No need to match the original data cable, you can also directly detect the charger protocol of hua wei and other brands. Product Manual and Bluetooth APP Manual: Please get them from Product guides and documents as follow. Thanks!
  • MULTIFUNCTIONAL BLUETOOTH FAST CHARGING PROTOCOL DETECTOR: Integrated USB-A, Micro-USB, Type-C interface, with 1.77-inch high-definition display, 5-digit/6-digit can be switched with one key, max resolution 0.00001, real-time monitoring of voltage, current, power, capacity, charging protocol during charging, Curve aveform, etc. At the same time, the data can be viewed through the Bluetooth APP for Android.
  • Unlike other USB multimeter, which displays voltage and current in alternate mode and you have to wait for the other mode. This device displays both voltage and current simultaneously!
  • A very handy USB power monitor to have around for checking both Vdc and the current a USB device would draw with re-charging and go to zero when fully charged
  • This foolproof usb meter has been a real benefit in sorting phones, cables and wall warts adapters into how well they are working for each of these apple devices.Are they capable of supplying adequate power
  • Great little digital multimeter for testing voltage/amps output and power draw for usb-driven devices. Easy to read, helps identify which chargers put out the most charging current.This does do the trick for trouble shooting
  • A simple little diagnostic tool.Functions well to monitor battery charging status. Shows volts supplied and amps drawn. Answered a few questions of your own as to why some devices charged better than others
  • Safety rated to European Standard 61010-031 Category III 1000V
  • Measures AC voltage from 50 to 1000V
  • Tester illuminates when AC voltage is detected
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform
  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring
  • CLEAR VOLTAGE INDICATION: Indicates presence of voltage from 40-1000VAC. A green light informs you the VoltAware is on and ready, while a bright flashing red light alerts you to voltage presence. The audible indicator gives you the option to turn the sound on or off in sensitive environments.
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement - with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries.
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job.
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically. Twist the tester body to the Off position, then back to On to reactivate.
  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables.
  • 3-prong plug
  • Lights indicate circuit condition
  • Checks for faulty wiring in 3-wire receptacles
  • Tests GFCI circuits
  • Country of origin: United States
  • Pocket Clip
  • Double Insulated Housing and Test Leads
  • Neon Light Indicates Presence Of Ac Voltage From 80-250 Vic

More Info

1    2    3    4    5    6    7    8    9    10