Best Toilet Mounting Parts. Danco brand. New releases 2021

DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 2-Set (80156)

More from Tools & Home Improvement
Search only Danco brand name
DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 2-Set (80156)

Current price: 3.99 USD


Check price and availability


Height: 1.2 Inches

Length: 5.1 Inches

Width: 3 Inches

Weight: 0.11 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set

More Info

NEXT BY DANCO All-in-One Toilet Installation Kit | Perfect Seal Wax Ring & Zero Cut Bolts | Toilet Repair | Wax-Free | Mounting Toilet Bolts (10879X) , Blue

More from Tools & Home Improvement
Search only Danco brand name
NEXT BY DANCO All-in-One Toilet Installation Kit | Perfect Seal Wax Ring & Zero Cut Bolts | Toilet Repair | Wax-Free | Mounting Toilet Bolts (10879X) , Blue

Current price: 15.42 USD


Check price and availability


Height: 2.5 Inches

Length: 1.61 Inches

Width: 1.61 Inches

Weight: 0.65 Pounds

Warranty: Limited 1 Year

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings

More Info

Danco 88192 Tank to Bowl Toilet Repair Kit for Crane

More from Tools & Home Improvement
Search only Danco brand name
Danco 88192 Tank to Bowl Toilet Repair Kit for Crane

Current price: 9.16 USD

Saving: $0.94 (9%)


Check price and availability


Height: 1.25 Inches

Length: 7 Inches

Width: 5 Inches

Weight: 0.6 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket

More Info

Danco 88018 Toilet Seat Hinges, 2-Pack

More from Tools & Home Improvement
Search only Danco brand name
Danco 88018 Toilet Seat Hinges, 2-Pack

Current price: 3.19 USD


Check price and availability


Height: 6.47 Inches

Length: 1.31 Inches

Width: 4.49 Inches

Warranty: Limited 1 year

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction

More Info

DANCO Toilet Handle Replacement, Chrome, 8 inch, 1-Pack (80806)

More from Tools & Home Improvement
Search only Danco brand name
DANCO Toilet Handle Replacement, Chrome, 8 inch, 1-Pack (80806)

Current price: 7.99 USD


Check price and availability


Height: 0.6 Inches

Length: 3.7 Inches

Width: 12.4 Inches

Weight: 0.15 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount

More Info

NEXT BY DANCO (10672X) HydroSeat Durable Toilet Flange Repair, Blue and Black, 1-Pack

More from Tools & Home Improvement
Search only Next by Danco brand name
NEXT BY DANCO (10672X) HydroSeat Durable Toilet Flange Repair, Blue and Black, 1-Pack

Current price: 18.44 USD


Check price and availability


Height: 7 Inches

Length: 7 Inches

Width: 1 Inches

Weight: 1 Pounds

Warranty: 5 year warranty

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction.
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom.
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars.
  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange.

More Info

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

More from Tools & Home Improvement
Search only Danco brand name
Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

Current price: 13.99 USD


Check price and availability


Height: 13 Inches

Length: 4 Inches

Width: 7.4 Inches

Weight: 0.55 Pounds

Warranty: 1 Year Limited Warranty

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction.
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom.
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars.
  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange.
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube.
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications.
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance.
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench.
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”.
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition.

More Info

Danco 88904 Toilet Flange Repair Ring, Steel, [Finish]<, For Use With 1/4 in or 5/16 in Closet Bolts

More from Tools & Home Improvement
Search only Danco brand name
Danco 88904 Toilet Flange Repair Ring, Steel, [Finish]<, For Use With 1/4 in or 5/16 in Closet Bolts

Current price: 10.28 USD

Saving: $0.50 (5%)


Check price and availability


Height: 7.25 Inches

Length: 8.5 Inches

Width: 3.5 Inches

Weight: 0.35 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction.
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom.
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars.
  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange.
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube.
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications.
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance.
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench.
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”.
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition.
  • Easy to install
  • Slotted for use with 1/4 in. or 5/16 in. closet bolts
  • Plastisol coated for long lasting corrosion protection
  • Unique screw tabs allow ring to be securely attached to eigher a wooden or concrete sub-floor
  • Durable steel construction

More Info

Danco 40098B Toilet Handle Nut, White

More from Tools & Home Improvement
Search only Danco brand name
Danco 40098B Toilet Handle Nut, White

Current price: 4.61 USD

Saving: $3.18 (41%)


Check price and availability


Height: 4.25 Inches

Length: 2.75 Inches

Width: 0.25 Inches

Weight: 0.1 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction.
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom.
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars.
  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange.
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube.
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications.
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance.
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench.
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”.
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition.
  • Easy to install
  • Slotted for use with 1/4 in. or 5/16 in. closet bolts
  • Plastisol coated for long lasting corrosion protection
  • Unique screw tabs allow ring to be securely attached to eigher a wooden or concrete sub-floor
  • Durable steel construction
  • Easy to install
  • White finish
  • Repairs leaky toilet
  • Secures handle to toilet
  • Durable plastic construction

More Info

Danco, White 88877 Universal Twister Toilet Caps, Plastic

More from Tools & Home Improvement
Search only Danco brand name
Danco, White 88877 Universal Twister Toilet Caps, Plastic

Current price: 3.49 USD


Check price and availability


Height: 0.94999998807907 Inches

Length: 0.94999998807907 Inches

Width: 1.1000000238419 Inches

Weight: 0.05 Pounds

  • CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
  • EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
  • DURABLE BRASS CONSTRUCTION provides strength and reliability
  • SECURELY FASTENS a toilet bowl to the floor
  • INCLUDES 2 BOLTS, washers and nuts in the set
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • Durable construction
  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket
  • Hardware included
  • Designed to fit most toilet seats
  • Provide an easy alternative to replacing an entire seat
  • Durable plastic construction
  • EASY do-it-yourself installation
  • 8 INCH maximum flush arm length and single action flush
  • DURABLE aluminum handle and arm construction equipped with corrosion resistant finish
  • STYLISH CHROME finish is sure to complement your existing bathroom décor
  • UNIVERSAL DESIGN that fits most toilets with a front arm mount
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction.
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom.
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars.
  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange.
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube.
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications.
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance.
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench.
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”.
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition.
  • Easy to install
  • Slotted for use with 1/4 in. or 5/16 in. closet bolts
  • Plastisol coated for long lasting corrosion protection
  • Unique screw tabs allow ring to be securely attached to eigher a wooden or concrete sub-floor
  • Durable steel construction
  • Easy to install
  • White finish
  • Repairs leaky toilet
  • Secures handle to toilet
  • Durable plastic construction
  • Complete the look of your toilet with twister caps.
  • Eliminates the problem of lost and missing toilet bolt caps through a screw on design.
  • This is a pack of 2 twister bolt caps finished in white.
  • The Twister Caps include adapters for 1/4-Inch and 5/16-inch bolts.
  • Constructed of high-impact plastic and a patented thread design, the cap WILL stay on.

More Info

1    2    3    4    5    6    7    8