Great Threading Taps. Reviews September, 2021, page 4

AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6

Search only AUTOTOOLHOME brand name
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6

Current price: 11.89 USD


Check price and availability


Weight: 0.18 Pounds

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.

More Info

Drill America DWT54511 5/16"-18 UNC High Speed Steel Tap Set

Search only Drill America brand name
Drill America DWT54511 5/16

Current price: 14.57 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads

More Info

KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

Search only KOOTANS brand name
KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

Current price: 11.78 USD


Check price and availability


  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)

More Info

6PC 1/4" 3/8" 1/2" STEEL TAP & DIE TOOL THREADER THREAD KIT PIPE THREADING

Search only Drill Bits brand name
6PC 1/4

Current price: 24.95 USD


Check price and availability


  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE

More Info

NEIKO 00911A Premium Tap and Die Set | 40 Piece | SAE | Titanium Coated

Search only Neiko brand name
NEIKO 00911A Premium Tap and Die Set | 40 Piece | SAE | Titanium Coated

Current price: 32.95 USD


Check price and availability


Height: 1.7 Inches

Length: 12 Inches

Width: 8 Inches

Weight: 3.3 Pounds

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.

More Info

5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit

Search only GAVAN brand name
5/16

Current price: 19.9 USD


Check price and availability


Weight: 0.07 Pounds

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit

More Info

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

Search only szgate brand name
5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

Current price: 7 USD


Check price and availability


  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.

More Info

110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set

Search only brand name
110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set

Current price: 84.99 USD


Check price and availability


Height: 2.8 Inches

Length: 18.5 Inches

Width: 13.8 Inches

Weight: 13 Pounds

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • This tap and die set comes with 110 pieces in total: 25 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M3 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included
  • Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot.
  • Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.
  • Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.
  • High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.

More Info

Metric Tap M6 x 1.0mm Pitch H2 Right Hand Thread HSS, Used For Conventional Machine Tapping Or CNC Tapping, Can Tap Steel And Stainless Steel.

Search only LingGan brand name
Metric Tap M6 x 1.0mm Pitch H2 Right Hand Thread HSS, Used For Conventional Machine Tapping Or CNC Tapping, Can Tap Steel And Stainless Steel.

Current price: 3.99 USD


Check price and availability


Height: 0.27559 Inches

Length: 2.893695 Inches

Width: 0.27559 Inches

Weight: 0.03086471668 Pounds

  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • This tap and die set comes with 110 pieces in total: 25 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M3 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included
  • Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot.
  • Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.
  • Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.
  • High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Uncoated tools only have a basic substrate, without any additional treatment or coating, suitable for a wide range of applications.
  • The blade is ground with high density, sharper, stable cutting, high hardness and wear resistance.
  • Straight groove design, smooth chip discharge, not easy to form chip accumulation.
  • Using high-quality high-speed steel M2, vacuum heat treatment, can be used to process stainless steel, carbon steel, 48 steel, mold steel, etc.

More Info

uxcell Spiral Point Plug Threading Tap M3.5 x 0.6 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap M3.5 x 0.6 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Current price: 8.29 USD


Check price and availability


  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Hand taps are popular for use in general machine tapping or CNC tapping
  • High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
  • High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
  • Used to make new threads or re-thread damaged and/or jammed threads
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • 6PC 1/4" 3/8" 1/2" STEEL TAP & DIE
  • [INCLUDES]: Convenient ABS hard case for organization, protection and safe storage.
  • [DURABLE]: Titanium coating provides more anti-corrosive rust resistance and durability than plain finished products.
  • [EASY-TO-USE]: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • [CUT AND REPAIR]: Tap and dies allow cutting and repair of external or internal screw threads by hand.
  • [QUALITY]: High strength GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
  • This tap and die set comes with 110 pieces in total: 25 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M3 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included
  • Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot.
  • Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.
  • Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.
  • High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Uncoated tools only have a basic substrate, without any additional treatment or coating, suitable for a wide range of applications.
  • The blade is ground with high density, sharper, stable cutting, high hardness and wear resistance.
  • Straight groove design, smooth chip discharge, not easy to form chip accumulation.
  • Using high-quality high-speed steel M2, vacuum heat treatment, can be used to process stainless steel, carbon steel, 48 steel, mold steel, etc.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M3.5 x 0.6; thread tolerance: H2; thread length: 13mm / 0.5"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

1    2    3    4    5    6    7    8    9    10