Great Threading Taps. Reviews August, 2021, page 4

Anbull 110-Piece Coarse & Fine Metric Taps and Dies Set-Alloy Steel-Threading and Rethread Tool Kit with Complete Accessories and Storage Case

More from Tools & Home Improvement
Search only Anbull brand name
Anbull 110-Piece Coarse & Fine Metric Taps and Dies Set-Alloy Steel-Threading and Rethread Tool Kit with Complete Accessories and Storage Case

Current price: 102.99 USD


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.

More Info

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

More from Tools & Home Improvement
Search only DKIBBITH brand name
6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

Current price: 13.49 USD


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.

More Info

Kings County Tools Tap and Die Set | 1/2 Inch Size | Cuts Male & Female Wooden Threads | Two-Handed Thread Box | Bottoming Tap | Long-Lasting Hardwood | Aluminum Wear Fittings

More from Tools & Home Improvement
Search only Kings County Tools brand name
Kings County Tools Tap and Die Set | 1/2 Inch Size | Cuts Male & Female Wooden Threads | Two-Handed Thread Box | Bottoming Tap | Long-Lasting Hardwood | Aluminum Wear Fittings

Current price: 58.4 USD


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches

More Info

KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

More from Tools & Home Improvement
Search only KOOTANS brand name
KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

Current price: 11.78 USD


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)

More Info

Hi-Spec 39 Piece SAE & Metric Tap and Die Set. DIY Tapered & Plug Hand Tapping, Cutting, Threading, Forming, & Chasing Kit for the Garage & Workshop

More from Tools & Home Improvement
Search only Hi-Spec brand name
Hi-Spec 39 Piece SAE & Metric Tap and Die Set. DIY Tapered & Plug Hand Tapping, Cutting, Threading, Forming, & Chasing Kit for the Garage & Workshop

Current price: 39.99 USD

Saving: $5.00 (11%)


Check price and availability


Height: 1.4566929119 Inches

Length: 12.4015747905 Inches

Width: 7.87401574 Inches

  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case

More Info

5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit

More from Tools & Home Improvement
Search only GAVAN brand name
5/16

Current price: 19.9 USD


Check price and availability


Weight: 0.07 Pounds

  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit

More Info

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools ((MT2))

More from Tools & Home Improvement
Search only AD INTERNATIONAL brand name
Threading & Tapping attachment-lathe tailstock die holder set Machine Tools ((MT2))

Current price: 66.5 USD

Saving: $4.75 (7%)


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe's chuck.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
  • Used for threading and tapping purpose on the lathe machine
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine

More Info

THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric

More from Tools & Home Improvement
Search only Thinkwork brand name
THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric

Current price: 32.68 USD

Saving: $7.31 (18%)


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe's chuck.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
  • Used for threading and tapping purpose on the lathe machine
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.

More Info

60 Piece Metric and SAE Standard Tap and Die Rethread Set Rethreading Kit for Cutting External and Internal Threads Amazing Tour

More from Tools & Home Improvement
Search only Amazing Tour brand name
60 Piece Metric and SAE Standard Tap and Die Rethread Set Rethreading Kit for Cutting External and Internal Threads Amazing Tour

Current price: 39.95 USD


Check price and availability


  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe's chuck.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
  • Used for threading and tapping purpose on the lathe machine
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread
  • Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; NPT tap 1/8-27; NPT die 1/8-27; Tap wrench M4-M12 3/16-1/2¡±; T-type tap wrench M3-M16 1/16-1/4¡±
  • Size:17 x 9 x 1.9"inch / 43 x 23 x 4.8cm. Weight:4.6lb / 2.1kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal
  • Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads

More Info

Rocaris Adjustable T-Handle Ratchet Tap Holder Wrench + 5pcs M3-M8 Machine Screw Thread Metric Plug Tap

More from Tools & Home Improvement
Search only Rocaris brand name
Rocaris Adjustable T-Handle Ratchet Tap Holder Wrench + 5pcs M3-M8 Machine Screw Thread Metric Plug Tap

Current price: 12.99 USD


Check price and availability


Weight: 0.440924524 Pounds

  • 🔳【Rethreading Tool Kit Classification 】 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
  • 🔳【Standard Metric Tap and Die Sizes】 18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, size is engraved on the metal surface.
  • 🔳【Widely Use】 Used for re-tightening fasteners and fastener holes for automobile and mechanical maintenance, very suitable for cutting on most metals (such as aluminum, brass, carbon steel, cast iron, copper and stainless steel) and updating external and internal threads to meet strict standards.
  • 🔳【Efficient & Sturdy Suitcase】Tapered locking holes and precise threads, the locking is firmer, and the thread cutting is more stable and more assured. The tapered tooth design can start threading smoothly and prevent excessive threading. Sturdy suitcase for easy access, carrying the tap and die set more convenient.
  • 🔳【Longevity & Sharpness】This coarse and fine threads is made of refined alloy steel, which is stronger than ordinary carbon steel tools, is not easy to break, and has a longer service life. The taps and dies are more stable and the size is more standard. What is rare is that the sharpness is equally reliable.
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out.
  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble.
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter
  • Bottoming tap finishes off the female section
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive.
  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.)
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 5/16" - 36 HSS Right hand Thread Tap with 7.3mm Drill bit
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe's chuck.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2"
  • Used for threading and tapping purpose on the lathe machine
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread
  • Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; NPT tap 1/8-27; NPT die 1/8-27; Tap wrench M4-M12 3/16-1/2¡±; T-type tap wrench M3-M16 1/16-1/4¡±
  • Size:17 x 9 x 1.9"inch / 43 x 23 x 4.8cm. Weight:4.6lb / 2.1kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal
  • Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
  • Usage: For Taps M3-M8 Features: T-Handle Ratcheting Tap Wrenches Three position gear box for quick, efficient ratcheting action Designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank
  • Small Size T-Handle Tap Wrench-Chuck Type M3-M8
  • Easy to operation even in narrow space. 3-8mm 7/64 - 5/16
  • Length of Wrench: 85mm / 3.35in

More Info

1    2    3    4    5    6    7    8    9    10