High rated Temperature Controllers. Reviews September, 2021, page 1

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Search only Inkbird brand name
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Current price: 35 USD


Check price and availability


Weight: 15.2 ounces

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.

More Info

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Search only Inkbird brand name
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Current price: 40.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.

More Info

Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

Search only Inkbird brand name
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

Current price: 16.99 USD


Check price and availability


Height: 3.3464566895 Inches

Length: 2.9527559025 Inches

Width: 1.3779527545 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.

More Info

bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V, Fermentation BBQ Reptile Aquarium

Search only bayite brand name
bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V, Fermentation BBQ Reptile Aquarium

Current price: 34.99 USD

Saving: $2.38 (6%)


Check price and availability


Weight: 1.41 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.

More Info

6PCS Temperature Controller Module XH-W1209 LCD Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ DC 12V Electronic Temp Control Module Switch

Search only UMLIFE brand name
6PCS Temperature Controller Module XH-W1209 LCD Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ DC 12V Electronic Temp Control Module Switch

Current price: 18.89 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.

More Info

BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W

Search only BN-LINK brand name
BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W

Current price: 18.99 USD


Check price and availability


Height: 1.6 Inches

Length: 4.5 Inches

Width: 3.5 Inches

Weight: 0.95 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.

More Info

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Search only Pymeter brand name
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Current price: 29.99 USD


Check price and availability


Height: 1.57 Inches

Length: 8.26 Inches

Width: 2.16 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.

More Info

BN-LINK Digital Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Carboy Homebrew Breeding Fermenter Seed Germination °C/°F -40-176°F 15A/1875W

Search only BN-LINK brand name
BN-LINK Digital Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Carboy Homebrew Breeding Fermenter Seed Germination °C/°F -40-176°F 15A/1875W

Current price: 34.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • SAFE & RELIABLE: The advanced thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 125VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5. Please pay attention to the children or pets at home in the unattended situation to avoid hanging wire and other dangerous situations
  • ✓ PROFESSIONAL GRADE: The tempature controlled heater cooler own high-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F. Maximize its functions
  • ✓ SET AND GO: The digital reptile aquarium thermometer have clear display screen, flexible buttons, and sensitive socket contacts. Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius
  • ✓ DUAL OUTLET & DUAL FUNCTIONALITY: The professional dual digital outlet three-prong ground plugs thermostat controller is capable of controlling a heating and cooling device simultaneously. Bring you great convenience by replacing those controllers that only have a single function
  • ✓ VARIETY OF USES: The heating and cooling thermostat can be used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more! keep your various environments in their ideal temperature range. Support multi-scene and multi-purpose use. Enrich your life and bring you happiness. Also features a 71 inch power cord and 71 inch probe cord for flexibility

More Info

KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

Search only KETOTEK brand name
KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

Current price: 28.98 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • SAFE & RELIABLE: The advanced thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 125VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5. Please pay attention to the children or pets at home in the unattended situation to avoid hanging wire and other dangerous situations
  • ✓ PROFESSIONAL GRADE: The tempature controlled heater cooler own high-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F. Maximize its functions
  • ✓ SET AND GO: The digital reptile aquarium thermometer have clear display screen, flexible buttons, and sensitive socket contacts. Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius
  • ✓ DUAL OUTLET & DUAL FUNCTIONALITY: The professional dual digital outlet three-prong ground plugs thermostat controller is capable of controlling a heating and cooling device simultaneously. Bring you great convenience by replacing those controllers that only have a single function
  • ✓ VARIETY OF USES: The heating and cooling thermostat can be used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more! keep your various environments in their ideal temperature range. Support multi-scene and multi-purpose use. Enrich your life and bring you happiness. Also features a 71 inch power cord and 71 inch probe cord for flexibility
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.

More Info

Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching

Search only Inkbird brand name
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching

Current price: 29.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • SAFE & RELIABLE: The advanced thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 125VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5. Please pay attention to the children or pets at home in the unattended situation to avoid hanging wire and other dangerous situations
  • ✓ PROFESSIONAL GRADE: The tempature controlled heater cooler own high-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F. Maximize its functions
  • ✓ SET AND GO: The digital reptile aquarium thermometer have clear display screen, flexible buttons, and sensitive socket contacts. Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius
  • ✓ DUAL OUTLET & DUAL FUNCTIONALITY: The professional dual digital outlet three-prong ground plugs thermostat controller is capable of controlling a heating and cooling device simultaneously. Bring you great convenience by replacing those controllers that only have a single function
  • ✓ VARIETY OF USES: The heating and cooling thermostat can be used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more! keep your various environments in their ideal temperature range. Support multi-scene and multi-purpose use. Enrich your life and bring you happiness. Also features a 71 inch power cord and 71 inch probe cord for flexibility
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.

More Info

1    2    3    4    5    6    7    8    9    10