High rated Temperature Controllers. Reviews September, 2021, page 1

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Search only Pymeter brand name
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Current price: 29.99 USD


Check price and availability


Height: 1.57 Inches

Length: 8.26 Inches

Width: 2.16 Inches

  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.

More Info

bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Search only bayite brand name
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Current price: 17.9 USD


Check price and availability


Height: 1.4 Inches

Length: 3.4 Inches

Width: 3 Inches

  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display

More Info

bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Search only bayite brand name
bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Current price: 17.98 USD


Check price and availability


Height: 1.4 Inches

Length: 3.4 Inches

Width: 3 Inches

Weight: 0.31 Pounds

  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display

More Info

Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller

Search only Inkbird brand name
Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller

Current price: 72.99 USD


Check price and availability


  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.

More Info

Aideepen STC-1000 Digital All-Purpose Temperature Controller AC 110V-220V 10A Heating Cooling Thermostat w/NTC Sensor

Search only Aideepen brand name
Aideepen STC-1000 Digital All-Purpose Temperature Controller AC 110V-220V 10A Heating Cooling Thermostat w/NTC Sensor

Current price: 13.59 USD


Check price and availability


  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating

More Info

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Search only Inkbird brand name
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Current price: 69.99 USD


Check price and availability


  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.

More Info

AC Infinity Controller 67, Smart Fan Controller with Temperature, Humidity, and Timer Controls, for CLOUDLINE Airlift CLOUDRAY Cooling and Ventilation

Search only AC Infinity brand name
AC Infinity Controller 67, Smart Fan Controller with Temperature, Humidity, and Timer Controls, for CLOUDLINE Airlift CLOUDRAY Cooling and Ventilation

Current price: 49.99 USD


Check price and availability


Height: 2.75 Inches

Length: 4.25 Inches

Width: 1 Inches

  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Supports up to two CLOUDLINE, AIRLIFT or CLOUDRAY fans with EC motors to share the same programming.
  • Features a powder-coated black body with a digital LCD display and a corded thermalloy sensor probe.
  • Programming includes auto triggers, timers, cycles, scheduling, minimum speed, and custom transitions.
  • Dynamically adjusts fan speed based on temperature and humidity conditions to produce optimal airflow.
  • A digital controller designed to equip AC Infinity fans with smart controls for HVAC or growing applications.

More Info

GOQOTOMO Smart Temperature Controller Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 100-240VAC NTC Sensor Improved Version

Search only GOQO TOMO brand name
GOQOTOMO Smart Temperature Controller Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 100-240VAC NTC Sensor Improved Version

Current price: 49.99 USD


Check price and availability


  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Supports up to two CLOUDLINE, AIRLIFT or CLOUDRAY fans with EC motors to share the same programming.
  • Features a powder-coated black body with a digital LCD display and a corded thermalloy sensor probe.
  • Programming includes auto triggers, timers, cycles, scheduling, minimum speed, and custom transitions.
  • Dynamically adjusts fan speed based on temperature and humidity conditions to produce optimal airflow.
  • A digital controller designed to equip AC Infinity fans with smart controls for HVAC or growing applications.
  • [Reliable Accuracy Reading] Enhanced NTC sensor offer accuracy measuring and reading.
  • [Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time.
  • [Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown.
  • [User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive.
  • [Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay.

More Info

Jonson Controls A19AAT-2C Freezer Temperature Controller (D132)

Search only Jonson Controls brand name
Jonson Controls A19AAT-2C Freezer Temperature Controller (D132)

Current price: 71.48 USD


Check price and availability


Height: 3.5 Inches

Length: 10.5 Inches

Width: 5.75 Inches

  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Supports up to two CLOUDLINE, AIRLIFT or CLOUDRAY fans with EC motors to share the same programming.
  • Features a powder-coated black body with a digital LCD display and a corded thermalloy sensor probe.
  • Programming includes auto triggers, timers, cycles, scheduling, minimum speed, and custom transitions.
  • Dynamically adjusts fan speed based on temperature and humidity conditions to produce optimal airflow.
  • A digital controller designed to equip AC Infinity fans with smart controls for HVAC or growing applications.
  • [Reliable Accuracy Reading] Enhanced NTC sensor offer accuracy measuring and reading.
  • [Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time.
  • [Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown.
  • [User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive.
  • [Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay.
  • Very economical
  • Plug unit into wall and then run the sensor into your freezer
  • Easy to set up and use
  • Great for turning a chest freezer into a keg refrigerator

More Info

Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

Search only Inkbird brand name
Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

Current price: 72.99 USD


Check price and availability


  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source.
  • Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V
  • Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm
  • Auto switch between refrigerating and heating. Return different value
  • Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Supports up to two CLOUDLINE, AIRLIFT or CLOUDRAY fans with EC motors to share the same programming.
  • Features a powder-coated black body with a digital LCD display and a corded thermalloy sensor probe.
  • Programming includes auto triggers, timers, cycles, scheduling, minimum speed, and custom transitions.
  • Dynamically adjusts fan speed based on temperature and humidity conditions to produce optimal airflow.
  • A digital controller designed to equip AC Infinity fans with smart controls for HVAC or growing applications.
  • [Reliable Accuracy Reading] Enhanced NTC sensor offer accuracy measuring and reading.
  • [Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time.
  • [Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown.
  • [User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive.
  • [Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay.
  • Very economical
  • Plug unit into wall and then run the sensor into your freezer
  • Easy to set up and use
  • Great for turning a chest freezer into a keg refrigerator
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.

More Info

1    2    3    4    5    6    7    8    9    10