Best Temperature Controllers. diymore brand. New releases 2021

Temperature Humidity Controller,Diymore SHT2000 Thermostat AC 110V-230V 10A Digital LED Display Multifunction Thermometer Hygrometer

More from Industrial & Scientific
Search only diymore brand name
Temperature Humidity Controller,Diymore SHT2000 Thermostat AC 110V-230V 10A Digital LED Display Multifunction Thermometer Hygrometer

Current price: 22.89 USD

Saving: $2.00 (8%)


Check price and availability


Height: 0.787401574 Inches

Length: 1.968503935 Inches

Width: 1.574803148 Inches

Weight: 0.30423792156 Pounds

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.

More Info

Diymore STC-1000 AC 10A 110V-220V All-Purpose Digital LED Temperature Controller Heating Cooling Thermostat 2 Relays Output with NTC Sensor Probe

More from Industrial & Scientific
Search only diymore brand name
Diymore STC-1000 AC 10A 110V-220V All-Purpose Digital LED Temperature Controller Heating Cooling Thermostat 2 Relays Output with NTC Sensor Probe

Current price: 14.29 USD


Check price and availability


Height: 1.37795 Inches

Length: 3.34645 Inches

Width: 2.95275 Inches

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.

More Info

diymore DC12V 4-Wire PWM PC Fan Temperature Control Manumotive Fan Speed Controller Module CPU High-Temperature Alarm with Buzzer with NTC 3950 Thermistor

More from Industrial & Scientific
Search only diymore brand name
diymore DC12V 4-Wire PWM PC Fan Temperature Control Manumotive Fan Speed Controller Module CPU High-Temperature Alarm with Buzzer with NTC 3950 Thermistor

Current price: 9.11 USD


Check price and availability


Height: 0.5 Inches

Length: 2 Inches

Width: 1.7 Inches

Weight: 0.03527396192 Pounds

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency

More Info

Diymore XH-M452 Thermostat Temperature Humidity Thermometer Hygrometer Controller Module DC 12V LED Digital Display Dual Outputs

More from Industrial & Scientific
Search only diymore brand name
Diymore XH-M452 Thermostat Temperature Humidity Thermometer Hygrometer Controller Module DC 12V LED Digital Display Dual Outputs

Current price: 16.99 USD


Check price and availability


Height: 1.49606 Inches

Length: 2.55905 Inches

Width: 2.16535 Inches

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.

More Info

Diymore 5pcs 3M DS18B20 Waterproof Temperature Sensor Thermistor Temperature Controller Thermometer with Probe (3M)

More from Industrial & Scientific
Search only diymore brand name
Diymore 5pcs 3M DS18B20 Waterproof Temperature Sensor Thermistor Temperature Controller Thermometer with Probe (3M)

Current price: 21.99 USD


Check price and availability


  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.

More Info

Diymore Smart Thermostat AC110V-220V Microcomputer Intelligent Digital Display Temperature Controller for Aquarium Fish Tank Incubator Refrigerator Fermenter (DTC1110)

More from Industrial & Scientific
Search only diymore brand name
Diymore Smart Thermostat AC110V-220V Microcomputer Intelligent Digital Display Temperature Controller for Aquarium Fish Tank Incubator Refrigerator Fermenter (DTC1110)

Current price: 16.99 USD


Check price and availability


Height: 1.33858 Inches

Length: 3.66141 Inches

Width: 2.20472 Inches

Weight: 0.2755778275 Pounds

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.
  • Repair system data: After the thermostat is powered on, first check whether the parameter settings are correct. If an error is detected, “Er” is displayed. At this time, pressing any key will restore the default parameter settings and work normally. It is recommended to reset the parameters at this time.
  • Cooling mode: When the measured temperature ≥ temperature set value + temperature difference set value, the Work indicator is on, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • Heating mode: When the measured temperature ≤ temperature set value-temperature difference set value, the Work indicator lights, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • When the thermostat works normally, the digital tube displays the current temperature measurement value. First set the temperature control working state, heating or cooling.
  • When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, short press the power button to turn on the thermostat.

More Info

diymore STC-3008 AC 110-220V 10A Digital Temperature Controller Thermostat Regulator Two Relay Output with Cooling Heating Double NTC Sensor Probe

More from Industrial & Scientific
Search only diymore brand name
diymore STC-3008 AC 110-220V 10A Digital Temperature Controller Thermostat Regulator Two Relay Output with Cooling Heating Double NTC Sensor Probe

Current price: 16.99 USD


Check price and availability


Height: 33.464566895 Inches

Length: 29.527559025 Inches

Width: 13.5826771515 Inches

Weight: 0.25132697868 Pounds

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.
  • Repair system data: After the thermostat is powered on, first check whether the parameter settings are correct. If an error is detected, “Er” is displayed. At this time, pressing any key will restore the default parameter settings and work normally. It is recommended to reset the parameters at this time.
  • Cooling mode: When the measured temperature ≥ temperature set value + temperature difference set value, the Work indicator is on, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • Heating mode: When the measured temperature ≤ temperature set value-temperature difference set value, the Work indicator lights, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • When the thermostat works normally, the digital tube displays the current temperature measurement value. First set the temperature control working state, heating or cooling.
  • When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, short press the power button to turn on the thermostat.
  • It can be used for freezer, water tanks, refrigerator, aquarium, homebrewing beer, chicken incubator, etc. It is also suitable for laboratories use and other temperature-controlled systems.
  • Dual heating and cooling function, control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration, refrigerating control output delay protection, automatic over temperature alarm.
  • Two screens, two NTC waterproof sensors, which can control two products simultaneously.
  • Temperature Measuring Range: -55℃~ 120℃; Resolution: 0.1 °C.

More Info

Diymore W1209S DC 12V Dual LED Display Digital Thermostat Temperature Controller Regulator Switch Relay with NTC Sensor Module

More from Industrial & Scientific
Search only diymore brand name
Diymore W1209S DC 12V Dual LED Display Digital Thermostat Temperature Controller Regulator Switch Relay with NTC Sensor Module

Current price: 8.99 USD


Check price and availability


  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.
  • Repair system data: After the thermostat is powered on, first check whether the parameter settings are correct. If an error is detected, “Er” is displayed. At this time, pressing any key will restore the default parameter settings and work normally. It is recommended to reset the parameters at this time.
  • Cooling mode: When the measured temperature ≥ temperature set value + temperature difference set value, the Work indicator is on, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • Heating mode: When the measured temperature ≤ temperature set value-temperature difference set value, the Work indicator lights, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • When the thermostat works normally, the digital tube displays the current temperature measurement value. First set the temperature control working state, heating or cooling.
  • When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, short press the power button to turn on the thermostat.
  • It can be used for freezer, water tanks, refrigerator, aquarium, homebrewing beer, chicken incubator, etc. It is also suitable for laboratories use and other temperature-controlled systems.
  • Dual heating and cooling function, control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration, refrigerating control output delay protection, automatic over temperature alarm.
  • Two screens, two NTC waterproof sensors, which can control two products simultaneously.
  • Temperature Measuring Range: -55℃~ 120℃; Resolution: 0.1 °C.
  • Measurement Input: NTC (10K 0.5%) Waterproof Sensor.
  • Static Current: ≤ 35MA; Attract Current ≤ 65MA.
  • High Temperature Protection: 0°C-110°C.
  • Temperature Control Mode: ON / OFF.
  • Temperature Range: -50°C-120°C.

More Info

Diymore 2pcs Matching Case W1209 Digital LED DC 12V Heat Cool Thermostat Temperature Switch On/Off Controller Board Acrylic Box

More from Industrial & Scientific
Search only diymore brand name
Diymore 2pcs Matching Case W1209 Digital LED DC 12V Heat Cool Thermostat Temperature Switch On/Off Controller Board Acrylic Box

Current price: 7.99 USD


Check price and availability


Height: 0.71 Inches

Length: 2.48 Inches

Width: 2.2 Inches

  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.
  • Repair system data: After the thermostat is powered on, first check whether the parameter settings are correct. If an error is detected, “Er” is displayed. At this time, pressing any key will restore the default parameter settings and work normally. It is recommended to reset the parameters at this time.
  • Cooling mode: When the measured temperature ≥ temperature set value + temperature difference set value, the Work indicator is on, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • Heating mode: When the measured temperature ≤ temperature set value-temperature difference set value, the Work indicator lights, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • When the thermostat works normally, the digital tube displays the current temperature measurement value. First set the temperature control working state, heating or cooling.
  • When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, short press the power button to turn on the thermostat.
  • It can be used for freezer, water tanks, refrigerator, aquarium, homebrewing beer, chicken incubator, etc. It is also suitable for laboratories use and other temperature-controlled systems.
  • Dual heating and cooling function, control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration, refrigerating control output delay protection, automatic over temperature alarm.
  • Two screens, two NTC waterproof sensors, which can control two products simultaneously.
  • Temperature Measuring Range: -55℃~ 120℃; Resolution: 0.1 °C.
  • Measurement Input: NTC (10K 0.5%) Waterproof Sensor.
  • Static Current: ≤ 35MA; Attract Current ≤ 65MA.
  • High Temperature Protection: 0°C-110°C.
  • Temperature Control Mode: ON / OFF.
  • Temperature Range: -50°C-120°C.
  • You can spend a little money to protect the W1209 12V DC digital thermostat temperature control switch sensor module.
  • Acrylic material, looks transparent(may need to tear down the film).
  • The package includes 2 pieces and will be well-packaged.
  • Easy for electronic enthusiasts to assemble.
  • DIY cover for W1209 control module.

More Info

diymore DST1000 AC 110-230V Digital Single LED Display Temperature Controller Thermostat DS18B20 Sensor with Waterproof Line Replace STC-1000

More from Industrial & Scientific
Search only diymore brand name
diymore DST1000 AC 110-230V Digital Single LED Display Temperature Controller Thermostat DS18B20 Sensor with Waterproof Line Replace STC-1000

Current price: 17.99 USD


Check price and availability


  • 【Dehumidifying Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
  • 【Humidifying Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification
  • 【Cooling Mode:】Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again
  • 【Heating Mode:】Start value < stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again
  • 【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient.
  • Control temperature by setting the temperature set value and the different value.
  • Refrigerating control output delay protection; wiring diagram for installation included.
  • Wide temperature range (-50-99 °C); dual heating and cooling function.
  • Automatic over temperature alarm; temperature calibration.
  • Mini and light weight design; large and clear LED display.
  • Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
  • Temperature probe parameters: 50K B = 3950. Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%
  • It can be opened with a three-wire fan monitoring function (stall warning)
  • A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications
  • Support all within 12V 5A fans, synchronous rectifier output, high efficiency
  • Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
  • Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
  • If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
  • The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
  • Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
  • Accuracy over the range of -10°C to +85°C: ±0.5°C.
  • Output lead: red (VCC), yellow(DATA) , black(GND).
  • Power supply range: 3.0V to 5.5V.
  • Stainless steel shell 6*50mm.
  • Cable length: 300CM.
  • Repair system data: After the thermostat is powered on, first check whether the parameter settings are correct. If an error is detected, “Er” is displayed. At this time, pressing any key will restore the default parameter settings and work normally. It is recommended to reset the parameters at this time.
  • Cooling mode: When the measured temperature ≥ temperature set value + temperature difference set value, the Work indicator is on, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • Heating mode: When the measured temperature ≤ temperature set value-temperature difference set value, the Work indicator lights, the relay normally open contact is closed; the Work indicator flashes, indicating that it is in the state of delay protection of the press; Value, the Work indicator is off, and the normally open contact of the relay is disconnected.
  • When the thermostat works normally, the digital tube displays the current temperature measurement value. First set the temperature control working state, heating or cooling.
  • When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, short press the power button to turn on the thermostat.
  • It can be used for freezer, water tanks, refrigerator, aquarium, homebrewing beer, chicken incubator, etc. It is also suitable for laboratories use and other temperature-controlled systems.
  • Dual heating and cooling function, control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration, refrigerating control output delay protection, automatic over temperature alarm.
  • Two screens, two NTC waterproof sensors, which can control two products simultaneously.
  • Temperature Measuring Range: -55℃~ 120℃; Resolution: 0.1 °C.
  • Measurement Input: NTC (10K 0.5%) Waterproof Sensor.
  • Static Current: ≤ 35MA; Attract Current ≤ 65MA.
  • High Temperature Protection: 0°C-110°C.
  • Temperature Control Mode: ON / OFF.
  • Temperature Range: -50°C-120°C.
  • You can spend a little money to protect the W1209 12V DC digital thermostat temperature control switch sensor module.
  • Acrylic material, looks transparent(may need to tear down the film).
  • The package includes 2 pieces and will be well-packaged.
  • Easy for electronic enthusiasts to assemble.
  • DIY cover for W1209 control module.
  • Setting(Stop Temperature): Press and hold the▼button 3 seconds to stop temperature flashing, use▲▼button to set Stop Temperature value.
  • Setting(Starting Temperature): Press and hold the▲button 3 seconds to start Temperature flashing,Use▲▼button to set Start Temperature value.
  • Applicable Scene: Various Sensor Control Boxes.Water Heater.Freezer.Fan(Not limited to the devices)
  • Temperature Measurement Accuracy: ±0.5°C(In the range of -10°C~+85°C
  • Supply Voltage: AC 110~230V

More Info

1    2    3