Best Temperature Controllers. KETOTEK brand. New releases 2021

KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

More from Industrial & Scientific
Search only KETOTEK brand name
KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

Current price: 28.98 USD


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.

More Info

KETOTEK STC-1000 Digital Temperature Controller AC 110V Thermostat Fahrenheit 2m Waterproof Sensor Heating Cooling LED Temp Control Dual Relay Incubator Aquarium 110 Volt

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK STC-1000 Digital Temperature Controller AC 110V Thermostat Fahrenheit 2m Waterproof Sensor Heating Cooling LED Temp Control Dual Relay Incubator Aquarium 110 Volt

Current price: 15.99 USD


Check price and availability


Height: 3.34645 Inches

Length: 2.95275 Inches

Width: 1.33858 Inches

Weight: 0.13 Pounds

  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.

More Info

Ketotek KT3100 Digital Temperature Controller Thermostat Outlet Socket Plug Heating Cooling Timer for Homebrew Greenhouse Terratium Reptiles Incubate Aquatium

More from Industrial & Scientific
Search only KETOTEK brand name
Ketotek KT3100 Digital Temperature Controller Thermostat Outlet Socket Plug Heating Cooling Timer for Homebrew Greenhouse Terratium Reptiles Incubate Aquatium

Current price: 19.99 USD


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc

More Info

Ketotek AC 110V Digital Temperature Controller Incubator Thermostat Fahrenheit 10A 2 Relays Cool Heat NTC 10K Sensor

More from Industrial & Scientific
Search only KETOTEK brand name
Ketotek AC 110V Digital Temperature Controller Incubator Thermostat Fahrenheit 10A 2 Relays Cool Heat NTC 10K Sensor

Current price: 16.98 USD


Check price and availability


Height: 1.76 Inches

Length: 3.35 Inches

Width: 2.95 Inches

Weight: 0.24375 Pounds

  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(

More Info

KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 16A Relay with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 16A Relay with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles

Current price: 36.99 USD

Saving: $3.00 (8%)


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)

More Info

KETOTEK Digital Thermostat Outlet Plug Temperature Controller Socket Heating Cooling with Probe 120V 15A for Heater Fan Celsius/Fahrenheit Display

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK Digital Thermostat Outlet Plug Temperature Controller Socket Heating Cooling with Probe 120V 15A for Heater Fan Celsius/Fahrenheit Display

Current price: 21.99 USD


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
  • 【Timing function】 F01~F04 modes for cycle timing and countdown: F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
  • 【Heating/cooling temperature control, Celsius/Fahrenheit display】 Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temperature controlled outlet is easy to program. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. It also supports temperature calibration.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.

More Info

KETOTEK Temperature Humidity Controller Module AC 120V, Digital humidistat Thermostat Switch with Probe, Humidifier Dehumidifier Heating Cooling Programmable Regulator for Incubator Greenhouse

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK Temperature Humidity Controller Module AC 120V, Digital humidistat Thermostat Switch with Probe, Humidifier Dehumidifier Heating Cooling Programmable Regulator for Incubator Greenhouse

Current price: 23.99 USD


Check price and availability


Height: 2.1653543285 Inches

Length: 2.9527559025 Inches

Width: 1.2598425184 Inches

  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
  • 【Timing function】 F01~F04 modes for cycle timing and countdown: F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
  • 【Heating/cooling temperature control, Celsius/Fahrenheit display】 Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temperature controlled outlet is easy to program. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. It also supports temperature calibration.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
  • 【Security alarm】Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature / humidity exceeds limit.
  • 【Specification】Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current

More Info

Digital Thermostat Plug Socket Temperature Controller Outlet 3m Probe 120V 15A 1800W ℉/℃ Heating Cooling Control for Heat Mat Incubator Seed Home Reptile Fridge Greenhouse Terrarium

More from Industrial & Scientific
Search only KETOTEK brand name
Digital Thermostat Plug Socket Temperature Controller Outlet 3m Probe 120V 15A 1800W ℉/℃ Heating Cooling Control for Heat Mat Incubator Seed Home Reptile Fridge Greenhouse Terrarium

Current price: 19.97 USD

Saving: $2.01 (9%)


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
  • 【Timing function】 F01~F04 modes for cycle timing and countdown: F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
  • 【Heating/cooling temperature control, Celsius/Fahrenheit display】 Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temperature controlled outlet is easy to program. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. It also supports temperature calibration.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
  • 【Security alarm】Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature / humidity exceeds limit.
  • 【Specification】Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current
  • 【Multiple Appliance】 The thermostat plug socket is Pre-wired, just plug in and play, suitable for various applications. Widely used in household, heating cooling equipment, Incubator, greenhouse, carbon crystal heating, aquaculture,etc.
  • 【Various Functions】 Heating/Refrigeration Function; ℉/°C Switchable Function; F01-F04 Timing Function; -9.9~9.9℉/℃ Temperature Calibration Function; Memory Function; Reset Function
  • 【Timing Function】 Thermostat Timer socket has F01-F04 mode, F01 cycle time control, F02 countdown on mode, F03 countdown off mode and F04 countdown on, countdown off mode, Time range is 0-99 hours and 59 minutes.
  • 【3 m Temperature Sensor】 The thermostat socket is supplied with a 3m NTC10K/B3950 temperature sensor, can sense -72~176℉/-40~120°C Temperature
  • 【Temperature Control Function】Set the temperature controller outlet start and stop temperature to control the heating or cooling equipment, Timer thermostat support 15A/120V 1800W load, suitable for most home appliance.

More Info

KETOTEK Digital Dual Temperature Controller 120V Fahrenheit Thermostat 10A with 2 1.5m Waterproof Probes, Heating Cooling Temperature Control Switch Refrigerator Fan Heater

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK Digital Dual Temperature Controller 120V Fahrenheit Thermostat 10A with 2 1.5m Waterproof Probes, Heating Cooling Temperature Control Switch Refrigerator Fan Heater

Current price: 19.99 USD


Check price and availability


Height: 1.22047 Inches

Length: 2.95275 Inches

Width: 2.16535 Inches

  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
  • 【Timing function】 F01~F04 modes for cycle timing and countdown: F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
  • 【Heating/cooling temperature control, Celsius/Fahrenheit display】 Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temperature controlled outlet is easy to program. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. It also supports temperature calibration.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
  • 【Security alarm】Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature / humidity exceeds limit.
  • 【Specification】Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current
  • 【Multiple Appliance】 The thermostat plug socket is Pre-wired, just plug in and play, suitable for various applications. Widely used in household, heating cooling equipment, Incubator, greenhouse, carbon crystal heating, aquaculture,etc.
  • 【Various Functions】 Heating/Refrigeration Function; ℉/°C Switchable Function; F01-F04 Timing Function; -9.9~9.9℉/℃ Temperature Calibration Function; Memory Function; Reset Function
  • 【Timing Function】 Thermostat Timer socket has F01-F04 mode, F01 cycle time control, F02 countdown on mode, F03 countdown off mode and F04 countdown on, countdown off mode, Time range is 0-99 hours and 59 minutes.
  • 【3 m Temperature Sensor】 The thermostat socket is supplied with a 3m NTC10K/B3950 temperature sensor, can sense -72~176℉/-40~120°C Temperature
  • 【Temperature Control Function】Set the temperature controller outlet start and stop temperature to control the heating or cooling equipment, Timer thermostat support 15A/120V 1800W load, suitable for most home appliance.
  • 【More features you'll love】This temperature controller can be reset as needed and has data storage function that all parameters setting can be saved after short circuit or power off. It can be used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, fridge, homebrew, vivarium, fermentation, pet breeding, industrial equipment and other temperature-controlled system.
  • 【Dual 1.5m NTC 10K probes waterproof】 This temperature controller features dual 1.5m NTC 10K probes made in TPE material and NTC 10K thermistor, which is professionally waterproof that can be placed in the water for a long time, longer service life than other metal probes.
  • 【Easy to operate】 Set start temperature and stop temperature, this temperature controller will start to work as programmed. You can also set compressor delay time for delay start protection, set high temperature alarm value and low temeprature alarm value for high/low temperature protection.
  • 【Heating and cooling function】 This temperature controller 110v has two working modes: heating mode and cooling mode. Temperature control range: -58~248℉, Control accuracy:±1℉. It also supports temperature calibration ( -30~30℉), making the temperature control more accurate.
  • 【2 in 1】 This digital dual temperature controller can control 2 devices simultaneously with independent probe and output. Max Output: 10A 120Vac (10A Relay inside, please use Load current

More Info

KETOTEK Digital Temperature Controller Plug Day/Night Thermostat Outlet with Timer 24 Hours Cycle for Reptile Terrarium Greenhouse Heating Cooling Celsius/Fahrenheit Display

More from Industrial & Scientific
Search only KETOTEK brand name
KETOTEK Digital Temperature Controller Plug Day/Night Thermostat Outlet with Timer 24 Hours Cycle for Reptile Terrarium Greenhouse Heating Cooling Celsius/Fahrenheit Display

Current price: 26.99 USD


Check price and availability


  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
  • 【Safe protection.】Temperature Regulator will alarm when temperature exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low and high temperature limit to change the temperature range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F calibrate the temperature when there is some error.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Wide temperature range.】The range for digital thermostat is -22~572℉, it can be used for heater or cooler, like a switch, can be set by differential (1~80℉) to turn on/off the load.
  • 【KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT】Every piece of our products is strictly inspected before sale. If you have any question please don’t hesitate to contact use when you use it, we have profesional technicians to help you with any problems in using. All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • 【ABS plastic shell & compressor delay protection function】This digital dual relay thermostat ac 110v made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the best safety guarantee to this temperature controller.
  • 【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This stc-1000 temperature controller has 2 Relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed).
  • 【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
  • 【2m Waterproof probe】Digital Dual Relay Thermostat (110v) can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.
  • Temperature correction function, screen lock protection function, memory function: all current settings will be saved after power off.
  • Big LCD display. The LCD display is able to show the temperature control mode ,start and stop temperature more easily.
  • Smart temperature controller. By setting start and stop temperature, this plug in temperature controller socket will automatically switch heating and cooling modes and control the heating/cooling equipment to work.
  • Smart timing. This plug time thermostat socket has the functions of cycle timing, timing opening, timing closing and timing switch. Timing range: range:0-99 hours 59 minutes, timing accuracy: MAX 10 minutes.
  • Smart to control temperature .widely used for heating mat, homebrew, greenhouse, aquarium, aquaculture etc
  • KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
  • ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
  • OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
  • WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
  • KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(
  • 16A RELAY OUTPUT. Can use higher power heating and cooling equipment, safer than 10A
  • SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
  • WATERPROOF SENSOR WITH HIGH SENSITIVITY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping.The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
  • BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
  • DUAL RELAY OUTPUT. Can be connected with refrigeration and heating equipment at the same time. Automatic conversion of cooling and heating. Maximum output load 1760W ( 110V)
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
  • 【Timing function】 F01~F04 modes for cycle timing and countdown: F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
  • 【Heating/cooling temperature control, Celsius/Fahrenheit display】 Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temperature controlled outlet is easy to program. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. It also supports temperature calibration.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
  • 【Security alarm】Alarm when temperature or humidity exceeds high / low temperature humidity setting value, alarm when sensor error or temperature / humidity exceeds limit.
  • 【Specification】Power supply: 120Vac, Output: Max 10A 120Vac(10A Relay inside, please use Load current
  • 【Multiple Appliance】 The thermostat plug socket is Pre-wired, just plug in and play, suitable for various applications. Widely used in household, heating cooling equipment, Incubator, greenhouse, carbon crystal heating, aquaculture,etc.
  • 【Various Functions】 Heating/Refrigeration Function; ℉/°C Switchable Function; F01-F04 Timing Function; -9.9~9.9℉/℃ Temperature Calibration Function; Memory Function; Reset Function
  • 【Timing Function】 Thermostat Timer socket has F01-F04 mode, F01 cycle time control, F02 countdown on mode, F03 countdown off mode and F04 countdown on, countdown off mode, Time range is 0-99 hours and 59 minutes.
  • 【3 m Temperature Sensor】 The thermostat socket is supplied with a 3m NTC10K/B3950 temperature sensor, can sense -72~176℉/-40~120°C Temperature
  • 【Temperature Control Function】Set the temperature controller outlet start and stop temperature to control the heating or cooling equipment, Timer thermostat support 15A/120V 1800W load, suitable for most home appliance.
  • 【More features you'll love】This temperature controller can be reset as needed and has data storage function that all parameters setting can be saved after short circuit or power off. It can be used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, fridge, homebrew, vivarium, fermentation, pet breeding, industrial equipment and other temperature-controlled system.
  • 【Dual 1.5m NTC 10K probes waterproof】 This temperature controller features dual 1.5m NTC 10K probes made in TPE material and NTC 10K thermistor, which is professionally waterproof that can be placed in the water for a long time, longer service life than other metal probes.
  • 【Easy to operate】 Set start temperature and stop temperature, this temperature controller will start to work as programmed. You can also set compressor delay time for delay start protection, set high temperature alarm value and low temeprature alarm value for high/low temperature protection.
  • 【Heating and cooling function】 This temperature controller 110v has two working modes: heating mode and cooling mode. Temperature control range: -58~248℉, Control accuracy:±1℉. It also supports temperature calibration ( -30~30℉), making the temperature control more accurate.
  • 【2 in 1】 This digital dual temperature controller can control 2 devices simultaneously with independent probe and output. Max Output: 10A 120Vac (10A Relay inside, please use Load current
  • 【More features you'll love】 3m NTC 10K temperature sensor probe. Temperature calibration. Celsius and Fahrenheit can be switched. Reset function.Memory function that all datas except the clock will be saved after power failure.
  • 【Timer function with 2 time period set during 24 hours】 This day/night temperature controller plug has timer function with dual time cycle setting during 24 hours. For example, set Time 1 ON=8:00, Time 2 OFF=18:00, the device will be turned on during 8:00~18:00 and turned off during 18:00~8:00, then cycle every day.
  • 【Temperature control function without timer】 If you only need to control temperature simply regardless of time period, you can choose M1 mode: temperature control mode. Set start temperature and stop temperature, it will control the heater or cooler to work as programmed. (start temperature > stop temperature, cooling; start temperature < stop temperature, heating).
  • 【Day/night temperature control function】 This temperature controller outlet plug can be set different temperatures with its function of dual time cycle setting during 24 hours according to the day and night. For example, during 8:00~18:00, control the temperature between 23℃~25℃; during 18:00~8:00 the next morning, control temperature between 17℃~19℃, then cycle every day.
  • 【Relay output, easy to use】 No wire required, just plug the device into this thermostat outlet plug and set parameters, it will work as programmed. Power supply: 100~250V AC 50/60Hz; Output: Max 15A/120V. Temperature control range:-40℃~120℃/-72℉~176℉.

More Info

1    2