Best Temperature Controllers. Inkbird brand. New releases 2021

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Current price: 29.75 USD

Saving: $5.25 (15%)


Check price and availability


Weight: 15.2 ounces

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.

More Info

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Current price: 40.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.

More Info

Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

Current price: 16.99 USD


Check price and availability


Height: 3.3464566895 Inches

Length: 2.9527559025 Inches

Width: 1.3779527545 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.

More Info

Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching

Current price: 28.99 USD

Saving: $5.85 (17%)


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.

More Info

Inkbird PID Thermostat Digital Temperature Controller Alarm 1800W 120V 15A Pre Wired Output NTC Sensor R25 ℃ 10KΩ Waterproof Probe Heat Cool On Off Pump Control IPB16S

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird PID Thermostat Digital Temperature Controller Alarm 1800W 120V 15A Pre Wired Output NTC Sensor R25 ℃ 10KΩ Waterproof Probe Heat Cool On Off Pump Control IPB16S

Current price: 118.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output

More Info

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Current price: 68.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.

More Info

Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier

Current price: 35.69 USD

Saving: $12.30 (26%)


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Alarm when humidity exceeds high/low humidity setting value;
  • Alarm when sensor error or humidity exceeds limit;
  • Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
  • Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature
  • Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH

More Info

Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V

Current price: 49.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Alarm when humidity exceeds high/low humidity setting value;
  • Alarm when sensor error or humidity exceeds limit;
  • Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
  • Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature
  • Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.

More Info

Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

Current price: 72.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Alarm when humidity exceeds high/low humidity setting value;
  • Alarm when sensor error or humidity exceeds limit;
  • Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
  • Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature
  • Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.

More Info

Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Aquarium Breeding Reptiles Hatching Heat Mat

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Aquarium Breeding Reptiles Hatching Heat Mat

Current price: 28.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 👏👏【Sensor Length 】2m / 6.56ft
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Alarm when humidity exceeds high/low humidity setting value;
  • Alarm when sensor error or humidity exceeds limit;
  • Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
  • Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature
  • Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
  • [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
  • [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.

More Info

1    2    3    4    5    6    7    8    9    10