Best Temperature Controllers. brand. New releases 2021

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Current price: 35 USD


Check price and availability


Weight: 15.2 ounces

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.

More Info

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Current price: 40.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.

More Info

WiFi & Bluetooth BBQ Temperature Controller ISC-007BW, Inkbird Automatic Smoker Fan Controller with 3 Probes for Big Green Egg, Kamado Joe, Weber, Primo, Vision Grill, Akorn Kamado

More from Industrial & Scientific
Search only Inkbird brand name
WiFi & Bluetooth BBQ Temperature Controller ISC-007BW, Inkbird Automatic Smoker Fan Controller with 3 Probes for Big Green Egg, Kamado Joe, Weber, Primo, Vision Grill, Akorn Kamado

Current price: 199.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.

More Info

Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

More from Industrial & Scientific
Search only Inkbird brand name
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

Current price: 16.99 USD


Check price and availability


Height: 3.3464566895 Inches

Length: 2.9527559025 Inches

Width: 1.3779527545 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.

More Info

BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W

More from Industrial & Scientific
Search only BN-LINK brand name
BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W

Current price: 18.99 USD


Check price and availability


Height: 1.6 Inches

Length: 4.5 Inches

Width: 3.5 Inches

Weight: 0.95 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.

More Info

WILLHI WH1436A 10A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

More from Industrial & Scientific
Search only WILLHI brand name
WILLHI WH1436A 10A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

Current price: 29.99 USD


Check price and availability


Height: 1.8 Inches

Length: 4.9 Inches

Width: 3.9 Inches

Weight: 1.04 Pounds

Warranty: 1 year from purchase date.

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller. NO wifi connection!
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!

More Info

bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V, Fermentation BBQ Reptile Aquarium

More from Industrial & Scientific
Search only bayite brand name
bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V, Fermentation BBQ Reptile Aquarium

Current price: 35.99 USD


Check price and availability


Weight: 1.41 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller. NO wifi connection!
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.

More Info

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

More from Industrial & Scientific
Search only Pymeter brand name
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Current price: 29.99 USD


Check price and availability


Height: 1.57 Inches

Length: 8.26 Inches

Width: 2.16 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller. NO wifi connection!
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.

More Info

Titan Controls 702450 Spartan Series Complete Digital Environmental Controller (Temperature, CO2 and Humidity)

More from Industrial & Scientific
Search only Titan Controls brand name
Titan Controls 702450 Spartan Series Complete Digital Environmental Controller (Temperature, CO2 and Humidity)

Current price: 569.95 USD


Check price and availability


Height: 10 Inches

Length: 10 Inches

Width: 6 Inches

Weight: 4.9 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller. NO wifi connection!
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • 14.5 Amps maximum/120 Volts/60Hz.
  • This controller will allow you to precisely monitor and control the environment in your grow room
  • Featuring an easy to use analog interface, this digital controller is easy to program and use
  • Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs

More Info

BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed

More from Industrial & Scientific
Search only BN-LINK brand name
BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed

Current price: 18.99 USD


Check price and availability


Height: 1.6 Inches

Length: 4.5 Inches

Width: 3.5 Inches

Weight: 1.14 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【What You Get】One ISC-007BW BBQ Temperature Controller + one adapter + one blast pipe+ three probes+ one damper+ manual. Get yours today, skyrocket your cooking performances!
  • 【Variable Speed Fan】The smoker fan controller is powerful and it will automatically adjust the speed according to the temperature change to achieve stable and precise control of the oven temperature. 3 probes(2 meat and 1 pit probe ) smoker controller has one ambient temperature probe and two meat temperature probes.
  • 【Temperature range & Calibration】The temperature range of this fan smoker is 32℉~572℉ (0℃ ~ 300℃) for short time use. 32℉~482℉ (0℃ ~ 250℃) for continuous monitoring. The temperature accuracy is±1.8℉. The calibration range is ±12℉.
  • 【Smart App & Easy to use 】This wifi and Bluetooth smoker controller has high and low temperature alarm, timers. And temperature graphs which can be download.The setting temperature also can be customized. One button operation, set and control the bbq controller with one dial only. Bring your tender and juicy meat.
  • 【Wifi & Bluetooth Control】The temperature controller supports both 164 feet Bluetooth connection&2.4GHz Wi-Fi connection. Download the Inkbird Pro app for free to control the smoker controller by your phone. More than one friend can control the same bbq controller at one time through wifi connection.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller. NO wifi connection!
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • 14.5 Amps maximum/120 Volts/60Hz.
  • This controller will allow you to precisely monitor and control the environment in your grow room
  • Featuring an easy to use analog interface, this digital controller is easy to program and use
  • Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
  • ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.

More Info

1    2    3    4    5    6    7    8    9    10