Best Tapered End Mills. Reviews June, 2021

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

Search only SpeTool brand name
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8

Current price: 20.89 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge

More Info

SpeTool Tapered Ball Nose Router Bit 1/4" X 3" with 0.5mm Ball Nose End Mill 4.82Deg for CNC Machine Engraving Carving Bits Woodworking H-Si Coated

Search only SpeTool brand name
SpeTool Tapered Ball Nose Router Bit 1/4

Current price: 17.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

SpeTool Tapered Ball Nose End Mill 1/4" Shank with 1/16" Cutting Radius for 3D Carving Engraving Router Bit, ZrN Coated

Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4

Current price: 18.99 USD


Check price and availability


Height: 12 Inches

Length: 30 Inches

Width: 12 Inches

Weight: 0.03125 Pounds

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated

More Info

OSCARBIDE Tapered Ball Nose Carbide End Mills 1/8" Shank R0.25 CNC Router Bit 2 Flutes Tin Coated for Engraving Milling 3D Relief Carving.5pcs/Set

Search only OSCARBIDE brand name
OSCARBIDE Tapered Ball Nose Carbide End Mills 1/8

Current price: 25.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set

More Info

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

Search only Genmitsu brand name
Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

Current price: 19.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

SpeTool Tapered Ball Nose End Mill 1/4" Shank with 1/32" Cutting Radius for 3D Carving Engraving Router Bit, ZrN Coated

Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4

Current price: 18.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated

More Info

SpeTool 5Pc/Pack Tapered Cone 1/8 End Mills 0.5MM Cutting Diameter 3D Wood Engrave CNC Router Bits Tools

Search only SpeTool brand name
SpeTool 5Pc/Pack Tapered Cone 1/8 End Mills 0.5MM Cutting Diameter 3D Wood Engrave CNC Router Bits Tools

Current price: 24.58 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge

More Info

Foos - Tapered Angle Ball Tip - 1/4 Shank -Solid Carbide - TiAIN Coated Router Bits (R=0.25x1/4” Shank)

Search only Foos brand name
Foos - Tapered Angle Ball Tip - 1/4 Shank -Solid Carbide - TiAIN Coated Router Bits (R=0.25x1/4” Shank)

Current price: 12.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Veteran Owned Company
  • Multiple sized tips
  • TiAIN Coated
  • Solid Carbide
  • 1/4 Shank

More Info

SpeTool Tapered Ball Nose End Mill 1/4" X 3" with 0.25mm Ball Nose 5.26Deg for CNC Machine Engraving Carving Bits H-Si Coated

Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4

Current price: 17.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Veteran Owned Company
  • Multiple sized tips
  • TiAIN Coated
  • Solid Carbide
  • 1/4 Shank
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated

Search only JERRAY brand name
4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8

Current price: 22.99 USD


Check price and availability


Length: 4 Centimeters

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc
  • Ball Raidus: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Veteran Owned Company
  • Multiple sized tips
  • TiAIN Coated
  • Solid Carbide
  • 1/4 Shank
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Overall Length: 40mm(L) / Material hardness:0~hrc55
  • Shank Diameter: 3.175mm ((d1) / Cutting Length: 15mm(L1)
  • Per Side Angle =5.09° / 4.15° / 3.20° / 2.25°(Approx.) (B)
  • Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm
  • Brand name: JERRAY / Tapered Ball Nose End Mill / Cone Cutters

More Info

1    2    3    4    5    6    7    8    9    10