Best Taper Pins. Reviews June, 2021

The Hillman Group 556 Taper Pin, 2/0 x 1-Inch, 12-Pack,Gray

Search only Hillman brand name
The Hillman Group 556 Taper Pin, 2/0 x 1-Inch, 12-Pack,Gray

Current price: 8.95 USD

Saving: $1.84 (17%)


Check price and availability


Height: 1.43 Inches

Length: 1.25 Inches

Width: 2.5 Inches

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners

More Info

uxcell 45# Carbon Steel GB117 35mm Length 3mm Small End Diameter 1:50 Taper Pin 10Pcs

Search only uxcell brand name
uxcell 45# Carbon Steel GB117 35mm Length 3mm Small End Diameter 1:50 Taper Pin 10Pcs

Current price: 6.99 USD


Check price and availability


  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.

More Info

Carbon Steel Taper Pin Assortment (100 Pieces), Plain Finish, Inch, With Case

Search only Small Parts brand name
Carbon Steel Taper Pin Assortment (100 Pieces), Plain Finish, Inch, With Case

Current price: 116.53 USD


Check price and availability


Weight: 1.76 Pounds

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes

More Info

18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #2/0 Pin Size, 0.141" Large End Diameter, 0.125" Small End Diameter, 3/4" Length (Pack of 10)

Search only Small Parts brand name
18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #2/0 Pin Size, 0.141

Current price: 11.98 USD


Check price and availability


Length: 0.75 Inches

Weight: 0.02 Pounds

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes

More Info

Steel Externally Threaded Taper Pin With Hex Nut, Plain Finish, Standard Tolerance, #4 Pin Size, 1/4"-28 Thread Size, 0.248" Large End Diameter, 0.232" Small End Diameter, 3/4" Length (Pack of 5)

Search only Small Parts brand name
Steel Externally Threaded Taper Pin With Hex Nut, Plain Finish, Standard Tolerance, #4 Pin Size, 1/4

Current price: 9.82 USD


Check price and availability


Length: 0.75 Inches

Weight: 0.02 Pounds

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access

More Info

uxcell Carbon Steel GB117 45mm Length 6mm X 6.9mm Small End Diameter 1:50 Taper Pin 15Pcs

Search only uxcell brand name
uxcell Carbon Steel GB117 45mm Length 6mm X 6.9mm Small End Diameter 1:50 Taper Pin 15Pcs

Current price: 9.99 USD


Check price and availability


  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 6mm / 0.24-inch; Large End Diameter: 6.9mm / 0.27-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of Carbon Steel. Its surface is very smooth.

More Info

18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #3/0 Pin Size, 0.125" Large End Diameter, 0.115" Small End Diameter, 1/2" Length (Pack of 10)

Search only Small Parts brand name
18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #3/0 Pin Size, 0.125

Current price: 10.72 USD


Check price and availability


Length: 0.5 Inches

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 6mm / 0.24-inch; Large End Diameter: 6.9mm / 0.27-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of Carbon Steel. Its surface is very smooth.
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes

More Info

Drill America DWRRTPS2/0 #2/0 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series

Search only Drill America brand name
Drill America DWRRTPS2/0 #2/0 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series

Current price: 19.55 USD


Check price and availability


  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 6mm / 0.24-inch; Large End Diameter: 6.9mm / 0.27-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of Carbon Steel. Its surface is very smooth.
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • 0.1137-inches short end and 0.1462-inches large end
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Available in round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Steel Externally Threaded Taper Pin With Hex Nut, Plain Finish, Standard Tolerance, #4 Pin Size, 1/4"-28 Thread Size, 0.248" Large End Diameter, 0.222" Small End Diameter, 1-1/4" Length (Pack of 5)

Search only Small Parts brand name
Steel Externally Threaded Taper Pin With Hex Nut, Plain Finish, Standard Tolerance, #4 Pin Size, 1/4

Current price: 10.38 USD


Check price and availability


Length: 1.25 Inches

  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 6mm / 0.24-inch; Large End Diameter: 6.9mm / 0.27-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of Carbon Steel. Its surface is very smooth.
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • 0.1137-inches short end and 0.1462-inches large end
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Available in round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access

More Info

HSS Hand Taper Pin Reamer 12MM Dia -OAL 255MM-Cut Edge Length 210MM-Shank 14MM

Search only MACHINE SPARES brand name
HSS Hand Taper Pin Reamer 12MM Dia -OAL 255MM-Cut Edge Length 210MM-Shank 14MM

Current price: 39.7 USD


Check price and availability


  • Corrosion resistant
  • Included variants range from 1" to 2" in length
  • Included variants range from 3/0 to #6 in pin size
  • Release easily, without galling, particularly in soft-plate applications
  • Designed to hold parts together when installing fasteners
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 3mm / 0.12-inch; Large End Diameter: 3.7mm / 0.15-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of 45# Carbon Steel. Its surface is very smooth.
  • Comes in a compartmented plastic case for organized storage
  • Made from carbon steel for strength
  • Each pins is consistently tapered 1/4" for every 12" length
  • Assortment includes 100 taper pins in a variety of sizes
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
  • * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
  • * Taper : 1:50; Small End Diameter: 6mm / 0.24-inch; Large End Diameter: 6.9mm / 0.27-inch.
  • * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
  • * These taper pins are made of Carbon Steel. Its surface is very smooth.
  • Standard tolerance
  • Meets ASME B18.8.2 specifications
  • Plain surface has no finish
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Taper pin has diameter that tapers along the length of the pin for installing in tapered holes
  • 0.1137-inches short end and 0.1462-inches large end
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Available in round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Standard tolerance
  • Plain surface has no finish
  • Steel is often used in applications where strength is the primary consideration
  • Tapers along length of the pin for installing in tapered holes
  • Threaded taper pin with hex nut can be installed in and removed from a hole with one-sided access
  • BRAND NEW

More Info

1    2    3    4    5    6    7    8    9    10