Good Spiral Point Taps. Reviews September, 2021, page 8

MaxTool 9/16-18NF Spiral Point Taps HSS M2 Thread Taps 18 TPI FULLY GROUND RIGHT HAND; SPF02W01R36F

Search only MaxTool brand name
MaxTool 9/16-18NF Spiral Point Taps HSS M2 Thread Taps 18 TPI FULLY GROUND RIGHT HAND; SPF02W01R36F

Current price: 19.38 USD


Check price and availability


Height: 0.63 Inches

Length: 5 Inches

Width: 0.88 Inches

Weight: 75 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 5/8-11 Spiral Point Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SPF02W01R40

Search only MaxTool brand name
MaxTool 5/8-11 Spiral Point Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SPF02W01R40

Current price: 19.62 USD


Check price and availability


Height: 0.88 Inches

Length: 6 Inches

Width: 1.07 Inches

Weight: 95 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Current price: 6.19 USD

Saving: $0.59 (9%)


Check price and availability


Weight: 0.0220462262 Pounds

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Cle-Line C62160 Plug Chamfer Spiral Point Tap, 5/16-18 UNC

Search only Cle-line brand name
Cle-Line C62160 Plug Chamfer Spiral Point Tap, 5/16-18 UNC

Current price: 9.73 USD


Check price and availability


Weight: 0.28 Pounds

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping

More Info

YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 12.27 USD


Check price and availability


Weight: 0.0661386786 Pounds

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell Spiral Point Plug Threading Tap M12 x 1.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap M12 x 1.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Current price: 9.99 USD

Saving: $1.50 (13%)


Check price and availability


  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M12 x 1.75; thread tolerance: H2; thread length: 30mm / 1.2"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Current price: 9.49 USD


Check price and availability


  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M12 x 1.75; thread tolerance: H2; thread length: 30mm / 1.2"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

Search only HARKY brand name
HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16

Current price: 6.81 USD

Saving: $1.49 (18%)


Check price and availability


  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M12 x 1.75; thread tolerance: H2; thread length: 30mm / 1.2"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell M8 x 1.25 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, DIN371/376, 2pcs

Search only uxcell brand name
uxcell M8 x 1.25 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, DIN371/376, 2pcs

Current price: 14.99 USD

Saving: $1.10 (7%)


Check price and availability


  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M12 x 1.75; thread tolerance: H2; thread length: 30mm / 1.2"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material and Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. TICN coating for improving wear and fusion resistance, long service life
  • Specifications: M8 x 1.25 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide downward chip removal

More Info

Champion Cutting Tool XL22-3/8-16 Heavy Duty Spiral Tap, Made in USA (12 per pack)

Search only Champion Cutting Tool Corp brand name
Champion Cutting Tool XL22-3/8-16 Heavy Duty Spiral Tap, Made in USA (12 per pack)

Current price: 91.13 USD


Check price and availability


Height: 1.25 Inches

Length: 2.9375 Inches

Width: 1.25 Inches

Weight: 0.1 Pounds

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 9/16"; Pitch: 18 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M12 x 1.75; thread tolerance: H2; thread length: 30mm / 1.2"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material and Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. TICN coating for improving wear and fusion resistance, long service life
  • Specifications: M8 x 1.25 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide downward chip removal
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, and other tough alloys
  • Plug style/three flute/H limits
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life
  • Ideal for through holes applications since spiral point quickly Shears and ejects chips ahead of the tap
  • Heavy duty spiral point taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA

More Info

1    2    3    4    5    6    7    8    9    10