Affordable Spiral Point Taps. Reviews September, 2021, page 6

YDLQWCZ Combination Drill Tap Bit Set 6 Piece Hex Shank Quick Change HSS Titanium Coated Spiral Tap Drill Bit Include M3 M4 M5 M6 M8 M10 Spiral Screw Tap Set

Search only YDLQWCZ brand name
YDLQWCZ Combination Drill Tap Bit Set 6 Piece Hex Shank Quick Change HSS Titanium Coated Spiral Tap Drill Bit Include M3 M4 M5 M6 M8 M10 Spiral Screw Tap Set

Current price: 12.45 USD


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.

More Info

MaxTool M3x0.5 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.5 mm FULLY GROUND RIGHT HAND; SPM02W01R03

Search only MaxTool brand name
MaxTool M3x0.5 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.5 mm FULLY GROUND RIGHT HAND; SPM02W01R03

Current price: 8.82 USD


Check price and availability


Height: 0.15 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 25 Grams

  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 12-24NC Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 24 TPI FULLY GROUND RIGHT HAND; SPN02W01R12

Search only MaxTool brand name
MaxTool 12-24NC Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 24 TPI FULLY GROUND RIGHT HAND; SPN02W01R12

Current price: 8.82 USD


Check price and availability


Height: 0.3 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 40 Grams

  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

YG-1 I2 Series Vanadium Alloy HSS Spiral Pointed Tap, TiN Coated, Round Shank with Square End, Plug Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 I2 Series Vanadium Alloy HSS Spiral Pointed Tap, TiN Coated, Round Shank with Square End, Plug Chamfer, 1/4

Current price: 14.49 USD


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell Spiral Point Plug Threading Tap UNC 1/2-13 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 1/2-13 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Current price: 19.59 USD


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

uxcell Metric Spiral Point Machine Screw Tap M2 Thread H2 Nitriding High Speed Steel 2pcs

Search only uxcell brand name
uxcell Metric Spiral Point Machine Screw Tap M2 Thread H2 Nitriding High Speed Steel 2pcs

Current price: 9.99 USD


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: HSS (High Speed Steel); Surface Treatment: Nitrogenize
  • Thread Length: 10mm / 0.4 inch; Total Length: 42mm / 1.65 inch
  • Thread Size: M2; Shank Side Width: 2.3mm / 0.1 inch

More Info

THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric

Search only Thinkwork brand name
THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric

Current price: 36.68 USD

Saving: $3.31 (8%)


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: HSS (High Speed Steel); Surface Treatment: Nitrogenize
  • Thread Length: 10mm / 0.4 inch; Total Length: 42mm / 1.65 inch
  • Thread Size: M2; Shank Side Width: 2.3mm / 0.1 inch
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.

More Info

MaxTool M4x0.7 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.7 mm FULLY GROUND RIGHT HAND; SPM02W01R04

Search only MaxTool brand name
MaxTool M4x0.7 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.7 mm FULLY GROUND RIGHT HAND; SPM02W01R04

Current price: 8.82 USD


Check price and availability


Height: 0.2 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 25 Grams

  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: HSS (High Speed Steel); Surface Treatment: Nitrogenize
  • Thread Length: 10mm / 0.4 inch; Total Length: 42mm / 1.65 inch
  • Thread Size: M2; Shank Side Width: 2.3mm / 0.1 inch
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 4 mm; Pitch: 0.7 mm
  • The premium high speed steel M2 material provides long tool life

More Info

2pcs Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Round Shank with Square End for Metal Wood Plastic Tapping with Good Cutting

Search only LingGan brand name
2pcs Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Round Shank with Square End for Metal Wood Plastic Tapping with Good Cutting

Current price: 8.99 USD


Check price and availability


Height: 0.31496 Inches

Length: 2.814955 Inches

Width: 0.248031 Inches

Weight: 0.0881849048 Pounds

  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: HSS (High Speed Steel); Surface Treatment: Nitrogenize
  • Thread Length: 10mm / 0.4 inch; Total Length: 42mm / 1.65 inch
  • Thread Size: M2; Shank Side Width: 2.3mm / 0.1 inch
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 4 mm; Pitch: 0.7 mm
  • The premium high speed steel M2 material provides long tool life
  • APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A3 Steel And Other Metals.
  • APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/Cnc Machining Center/Automatic Lathe/Milling Machine, Etc.
  • OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability Of The Equipment.
  • SELECTED MATERIAL: Overall HSS Imported Steel, Combined With Abrasion Resistance And Hardness, A Wide Range Of Processing, One Piece Worth Multiple Pieces.
  • IMPORTED TECHNOLOGY: Imported High-Precision Grinder, The Whole Is Ground And Formed At One Time, The Concentricity Is High, The Rigidity Of The Tap Is Increased, And It Is Not Easy To Break.

More Info

uxcell Spiral Point Plug Threading Tap M5 x 0.8 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap M5 x 0.8 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Current price: 6.99 USD


Check price and availability


  • ✔【high-speed steel】HSS4341 steel with titanium coating for capability and durability. Ideal for drilling, tapping and cutting on wood, soft metal, aluminum, iron, etc. (Note: Not applicable to 304 stainless steel or high hardness metal.)
  • ✔【Drill and Tap Bit】Complete drilling, tapping, deburring and countersinking at one time, saving processing steps and time costs and improving work efficiency. The wide flutes carry the chips out of the hole.
  • ✔ 【Widely Application】Quick change 1/4” inch hex shank. Can be used with power tools, electric drill, group general tools, air and other any standard bit holders.1/4 inch hex shank fits into power tools more easily and securely.
  • ✔【Composite Cone】Fast replacement composite cone, uses drill edged principle.High hardness, rustproof, solid and durable.Taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • ✔【6Pcs Tap Drill Bit Sets】Titanium Coated HSS Drill and Tap Bits, include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, set of 6 Size is clearly engraved on the shank for easy identification.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 3 mm; Pitch: 0.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 24 TPI
  • The premium high speed steel M2 material provides long tool life
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/2-13; thread tolerance: H2; thread length: 35mm / 1.37"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: HSS (High Speed Steel); Surface Treatment: Nitrogenize
  • Thread Length: 10mm / 0.4 inch; Total Length: 42mm / 1.65 inch
  • Thread Size: M2; Shank Side Width: 2.3mm / 0.1 inch
  • 【After-sales service】If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 4 mm; Pitch: 0.7 mm
  • The premium high speed steel M2 material provides long tool life
  • APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A3 Steel And Other Metals.
  • APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/Cnc Machining Center/Automatic Lathe/Milling Machine, Etc.
  • OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability Of The Equipment.
  • SELECTED MATERIAL: Overall HSS Imported Steel, Combined With Abrasion Resistance And Hardness, A Wide Range Of Processing, One Piece Worth Multiple Pieces.
  • IMPORTED TECHNOLOGY: Imported High-Precision Grinder, The Whole Is Ground And Formed At One Time, The Concentricity Is High, The Rigidity Of The Tap Is Increased, And It Is Not Easy To Break.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: M5 x 0.8; thread tolerance: H2; thread length: 20mm / 0.78"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

1    2    3    4    5    6    7    8    9    10