Wonderful Spiral Point Taps. Reviews August, 2021, page 7

Morse Cutting Tools 33015 Spiral Point Plug Taps, High-Speed Steel, Bright Finish, H3 Pitch Diameter, 2 Flutes, 5/16", 18 Size

More from Tools & Home Improvement
Search only Morse Cutting Tools brand name
Morse Cutting Tools 33015 Spiral Point Plug Taps, High-Speed Steel, Bright Finish, H3 Pitch Diameter, 2 Flutes, 5/16

Current price: 6.39 USD

Saving: $3.60 (36%)


Check price and availability


Height: 1 Inches

Length: 4 Inches

Width: 1 Inches

Weight: 0.44 Pounds

  • High Speed Steel
  • Hand Tap
  • List No. 2047

More Info

uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

More from Tools & Home Improvement
Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Current price: 9.09 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

MaxTool 12-28NF Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 28 TPI FULLY GROUND RIGHT HAND; SPN02W01R12F

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 12-28NF Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 28 TPI FULLY GROUND RIGHT HAND; SPN02W01R12F

Current price: 9.19 USD


Check price and availability


Height: 0.3 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 40 Grams

  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool M5x0.8 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.8 mm FULLY GROUND RIGHT HAND; SPM02W01R05

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool M5x0.8 Spiral Point Taps HSS M2 Thread Taps Metric Taps Pitch 0.8 mm FULLY GROUND RIGHT HAND; SPM02W01R05

Current price: 9 USD


Check price and availability


Height: 0.22 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 25 Grams

  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life

More Info

YG-1 - F1203 F1 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F1203 F1 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance

Current price: 14.18 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

More from Tools & Home Improvement
Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 8-32 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Current price: 7.29 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

Kodiak Cutting Tools KCT208371 USA Made Spiral Point Plug Threading Tap, 3/8" x 18 TPI, Ground Threads, High Speed Steel, 3 Flute, 3/8-16 Size

More from Tools & Home Improvement
Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KCT208371 USA Made Spiral Point Plug Threading Tap, 3/8

Current price: 12.99 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 3 Flutes
  • 2-15/16 Overall Length
  • 1-1/4 Thread Length
  • .381 Shank Diameter
  • Made In the USA

More Info

Cle-Line C62160 Plug Chamfer Spiral Point Tap, 5/16-18 UNC

More from Tools & Home Improvement
Search only Cle-line brand name
Cle-Line C62160 Plug Chamfer Spiral Point Tap, 5/16-18 UNC

Current price: 9.8 USD


Check price and availability


Weight: 0.28 Pounds

  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 3 Flutes
  • 2-15/16 Overall Length
  • 1-1/4 Thread Length
  • .381 Shank Diameter
  • Made In the USA
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping

More Info

GUHRING 9039070041660 Spiral Point Tap, Plug, Powered Metal Cobalt, TiN Coating, 3 Flute, 8-32 Size

More from Tools & Home Improvement
Search only Guhring brand name
GUHRING 9039070041660 Spiral Point Tap, Plug, Powered Metal Cobalt, TiN Coating, 3 Flute, 8-32 Size

Current price: 40.88 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 3 Flutes
  • 2-15/16 Overall Length
  • 1-1/4 Thread Length
  • .381 Shank Diameter
  • Made In the USA
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • Item Package Dimension:1.016 cm L X 8.89 cm W X 11.937 cmh
  • Product Type:Cutting Tools
  • Item Package Quantity:1
  • Country Of Origin: United States

More Info

Morse Cutting Tools 92535 Spiral Point Taps, High-Speed Steel, Titanium Nitride (TiN) Coated Finish, Plug Type, H2 Pitch Diameter, 2 Flutes, 10-32 Size

More from Tools & Home Improvement
Search only Morse Cutting Tools brand name
Morse Cutting Tools 92535 Spiral Point Taps, High-Speed Steel, Titanium Nitride (TiN) Coated Finish, Plug Type, H2 Pitch Diameter, 2 Flutes, 10-32 Size

Current price: 9.79 USD


Check price and availability


  • High Speed Steel
  • Hand Tap
  • List No. 2047
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.12; Pitch: 28 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 5 mm; Pitch: 0.8 mm
  • The premium high speed steel M2 material provides long tool life
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 8-32; thread tolerance: H2; thread length: 18mm / 0.7"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 3 Flutes
  • 2-15/16 Overall Length
  • 1-1/4 Thread Length
  • .381 Shank Diameter
  • Made In the USA
  • Spiral point pushes chips forward for through hole applications
  • Plug chamfer for general purpose applications
  • HSS substrate, bright finish
  • Ground thread for economical tapping
  • Item Package Dimension:1.016 cm L X 8.89 cm W X 11.937 cmh
  • Product Type:Cutting Tools
  • Item Package Quantity:1
  • Country Of Origin: United States
  • Part Number: 92535
  • Country of Origin : United States
  • Package Weight: 0.04 pounds
  • Package Dimensions: 4 L x 1 H x 1 W (inches)

More Info

1    2    3    4    5    6    7    8    9    10