Best Spiral Flute Taps. Reviews June, 2021

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

Search only Rocaris brand name
Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

Current price: 17.99 USD

Saving: $4.00 (18%)


Check price and availability


Weight: 0.110231131 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.

More Info

Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

Search only YAKAMOZ brand name
Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

Current price: 14.99 USD


Check price and availability


Height: 0.4330708657 Inches

Length: 5.511811018 Inches

Width: 3.149606296 Inches

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12

More Info

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Search only Rocaris brand name
Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Current price: 13.99 USD

Saving: $3.00 (18%)


Check price and availability


Weight: 0.110231131 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.

More Info

YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Current price: 6.82 USD


Check price and availability


Weight: 0.0220462262 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 8.43 USD

Saving: $2.96 (26%)


Check price and availability


Weight: 0.0661386786 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 11.1 USD

Saving: $1.17 (10%)


Check price and availability


Weight: 0.0661386786 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

Current price: 7.03 USD


Check price and availability


Weight: 0.0220462262 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Current price: 7.35 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2

Current price: 11.57 USD


Check price and availability


Weight: 0.1 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4403 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F4403 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 7.02 USD


Check price and availability


Weight: 0.0440924524 Pounds

  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10