Wonderful Spiral Flute Taps. Reviews September, 2021, page 7

Greenfield Threading 330135 GT/VTD SPGP D5 3FL GP Plug Spiral Point Tap, M12 x 1.25 mm

Search only Greenfield Threading brand name
Greenfield Threading 330135 GT/VTD SPGP D5 3FL GP Plug Spiral Point Tap, M12 x 1.25 mm

Current price: 17.52 USD


Check price and availability


Height: 0.6 Inches

Length: 4.2 Inches

Width: 0.6 Inches

Weight: 0.01 Pounds

  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools

More Info

FASTROHY 10 Pcs Micro Taps for Clocks and Watches Tapping,Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

Search only FASTROHY brand name
FASTROHY 10 Pcs Micro Taps for Clocks and Watches Tapping,Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

Current price: 13.99 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)

More Info

YG-1 T2 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 1/4"-28 Thread Size, H3 Tolerance - T2423C

Search only YG-1 brand name
YG-1 T2 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 1/4

Current price: 13.55 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell M3 x 0.5 Screw Spiral Flute Ti Coated Spiral Point Tap 2Pcs

Search only uxcell brand name
uxcell M3 x 0.5 Screw Spiral Flute Ti Coated Spiral Point Tap 2Pcs

Current price: 8.99 USD


Check price and availability


Height: 0.39 Inches

Length: 1.97 Inches

Width: 0.39 Inches

  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g

More Info

YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M8.0-1.25 Thread Size, D5 Tolerance

Search only YG-1 brand name
YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M8.0-1.25 Thread Size, D5 Tolerance

Current price: 12.69 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 C2 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance

Search only YG-1 brand name
YG-1 C2 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance

Current price: 4.58 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 BW Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M4-0.7 Thread Size, D4 Tolerance

Search only YG-1 brand name
YG-1 BW Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M4-0.7 Thread Size, D4 Tolerance

Current price: 7.82 USD

Saving: $3.54 (31%)


Check price and availability


Weight: 0.0220462262 Pounds

  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.276-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

DelitonGude 10pcs Machine Screw Tap Set 5% Cobalt Spiral Flute Drill Taps Metric M6 Thread Tapping Tool(M6)

Search only DelitonGude brand name
DelitonGude 10pcs Machine Screw Tap Set 5% Cobalt Spiral Flute Drill Taps Metric M6 Thread Tapping Tool(M6)

Current price: 26.99 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.276-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30.
  • Strong Box package Included: 10 Pcs Spiral Flute Metric Taps.Save your money so much
  • Spiral groove design, well chip removal, Easy tapping.With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M6X1mm

More Info

BOSCH BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

Search only BOSCH brand name
BOSCH BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

Current price: 24.32 USD


Check price and availability


Height: 8 Inches

Length: 10.15 Inches

Width: 1.86 Inches

  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.276-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30.
  • Strong Box package Included: 10 Pcs Spiral Flute Metric Taps.Save your money so much
  • Spiral groove design, well chip removal, Easy tapping.With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M6X1mm
  • Rust- and tarnish-resistant design – provides greater durability and accuracy
  • Rolled threads – deliver more accuracy and are cleaner than machined threads
  • Heat-treated carbon steel – provides superior durability
  • Left-hand flutes – grip the metal firmly
  • Screw extractors – used for removing stripped screws, bolts and other fasteners

More Info

Kodiak Cutting Tools KTC208195 USA Made Spiral Point Plug Tap, 2 Flute, 5/16" Diameter x 18 TPI, Ground Threads, High Speed Steel, 5/16-18 Size

Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KTC208195 USA Made Spiral Point Plug Tap, 2 Flute, 5/16

Current price: 10.99 USD


Check price and availability


  • Package Quantity :1
  • Country Of Origin :United States
  • Package Dimensions :1.7 Cm L X1.7 Cm W X10.4 Cm H
  • Product Type :Cutting Tools
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Pitch: 0.5mm; Flute Length: 15mm/0.6"
  • Package Content: 2 x Spiral Plug Tap; Square Head Size: 3 x 3mm/0.12" x 0.12"(L*W)
  • Flute Diameter: 3mm/0.12"(M3); Material: HSS; Features: Spiral Flute
  • Product Name: Spiral Plug Tap; Shank Diameter: 3 mm/0.12"
  • Total Length: 50mm/2"; Total Weight: 8g
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.276-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30.
  • Strong Box package Included: 10 Pcs Spiral Flute Metric Taps.Save your money so much
  • Spiral groove design, well chip removal, Easy tapping.With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M6X1mm
  • Rust- and tarnish-resistant design – provides greater durability and accuracy
  • Rolled threads – deliver more accuracy and are cleaner than machined threads
  • Heat-treated carbon steel – provides superior durability
  • Left-hand flutes – grip the metal firmly
  • Screw extractors – used for removing stripped screws, bolts and other fasteners
  • 2 Flutes
  • 2-23/32 Overall Length
  • 1-1/8 THREAD LENGTH
  • .318 SHK DIA
  • Made In the USA

More Info

1    2    3    4    5    6    7    8    9    10