Inexpensive Spiral Flute Taps. Reviews September, 2021, page 5

Accusize Industrial Tools Hss Spiral Flute Aligning Reamer, 7/8'' Cutting Diameter, 1/2'' Shank Diameter, 0522-0078

Search only Accusize Industrial Tools brand name
Accusize Industrial Tools Hss Spiral Flute Aligning Reamer, 7/8'' Cutting Diameter, 1/2'' Shank Diameter, 0522-0078

Current price: 46.4 USD


Check price and availability


Height: 1 Inches

Length: 7.9 Inches

Width: 1 Inches

  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance

Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance

Current price: 13.91 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 F8283 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 F8283 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Current price: 9.5 USD

Saving: $2.49 (21%)


Check price and availability


Weight: 0.02 Pounds

  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Luctool 6-32 UNC Spiral Flute Tap Bottoming GH3 Limit 2 Flute HSS Uncoated Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading.

Search only Luctool brand name
Luctool 6-32 UNC Spiral Flute Tap Bottoming GH3 Limit 2 Flute HSS Uncoated Bright Finished Ground Thread. Luctool Provides Premium Quality Hand Tools for Metal Threading.

Current price: 9.99 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.

More Info

Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4" Diameter x 20 TPI, 1/4-20 Size

Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4

Current price: 8.99 USD


Check price and availability


Weight: 0.0661386786 Pounds

  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA

More Info

YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M8.0-1.25 Thread Size, D5 Tolerance

Search only YG-1 brand name
YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M8.0-1.25 Thread Size, D5 Tolerance

Current price: 9.57 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

Search only uxcell brand name
uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

Current price: 9.29 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch

More Info

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

Search only ATOPLEE brand name
ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

Current price: 13.88 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 【Usage】Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps .
  • Square Head Size:3.1x 3.1mm/4.0x 4.0mm/4.1x4.1 mm/4.6x4.6 mm/5.1x5.1 mm (L*W).
  • 【Size】Thread Diameter:3mm/4mm/5mm/6mm/8mm;Shank Diameter:4.0mm/5.0mm/5.1mm/6.0mm/6.3mm;Total Length:51mm/54mm/59mm/59mm/72mm.
  • 【Type】M3*0.5 /M4*0.7 /M5*0.8 /M6*1/M8*1.25,Pitch:0.5mm/0.7mm/0.8mm/1.0mm/1.25mm.
  • 【Good Quality Material】High-speed steel 6542,tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life .

More Info

TOPINCN Spiral Flute Taps Screw Tap Drill Bits Spiral Flute Metric Taps Set High Speed Steel Hex Shank Combination 6pcs M3-M10 (HSS4341)

Search only TOPINCN brand name
TOPINCN Spiral Flute Taps Screw Tap Drill Bits Spiral Flute Metric Taps Set High Speed Steel Hex Shank Combination 6pcs M3-M10 (HSS4341)

Current price: 10.99 USD


Check price and availability


Height: 1.181102361 Inches

Length: 2.8740157451 Inches

Width: 1.181102361 Inches

  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 【Usage】Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps .
  • Square Head Size:3.1x 3.1mm/4.0x 4.0mm/4.1x4.1 mm/4.6x4.6 mm/5.1x5.1 mm (L*W).
  • 【Size】Thread Diameter:3mm/4mm/5mm/6mm/8mm;Shank Diameter:4.0mm/5.0mm/5.1mm/6.0mm/6.3mm;Total Length:51mm/54mm/59mm/59mm/72mm.
  • 【Type】M3*0.5 /M4*0.7 /M5*0.8 /M6*1/M8*1.25,Pitch:0.5mm/0.7mm/0.8mm/1.0mm/1.25mm.
  • 【Good Quality Material】High-speed steel 6542,tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life .
  • SET INCLUDE: 6pcs per set, including M3*0.5mm, M4*0.7mm, M5*0.8mm, M6*1mm, M8*1.25mm and M10*1.5mm
  • Universal hex shank, compatible with 3-jaw chuck
  • EASY TO USE: Combine drill bit with screw tap, convenient for your processing, time and labor saving
  • WIDE APPLICATION: Drill bit of HSS 4341 is suitable for soft metals such as aluminum alloy, tin alloy, zinc alloy, and drill bit of HSS 6542 is also suitable for the processing of thin iron sheet
  • MATERIAL: High speed steel screw tap drill bits are of high hardness and good abrasion resistance

More Info

YXQ M3 x 0.5mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug, 4Pcs

Search only YXQ brand name
YXQ M3 x 0.5mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug, 4Pcs

Current price: 6.99 USD


Check price and availability


  • The point is tapered to allow entry into overlapping holes.
  • HSS reamer to align existing hole prior to rivet or bolt installation.
  • Left-Hand Spiral with Right-Hand Cut
  • 5 Flutes
  • Reamer Dia: 7/8''; Shank Dia: 1/2''; Shank Length: 1-1/2''; Flute Length: 5''; Overall Length: 6-7/8''
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Satisfaction Guarantee--60 days money back. Your satisfaction is always our priority.
  • Prompt shipping from US warehouse.
  • Making our hardworking people happy with tools having premium quality and reasonable price.
  • Our tools are widely applied on metal cutting, home improvement, thread repairing and construction…
  • Luctool provides threading tools including taps, dies and related products.
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA
  • 0.472-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 【Usage】Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps .
  • Square Head Size:3.1x 3.1mm/4.0x 4.0mm/4.1x4.1 mm/4.6x4.6 mm/5.1x5.1 mm (L*W).
  • 【Size】Thread Diameter:3mm/4mm/5mm/6mm/8mm;Shank Diameter:4.0mm/5.0mm/5.1mm/6.0mm/6.3mm;Total Length:51mm/54mm/59mm/59mm/72mm.
  • 【Type】M3*0.5 /M4*0.7 /M5*0.8 /M6*1/M8*1.25,Pitch:0.5mm/0.7mm/0.8mm/1.0mm/1.25mm.
  • 【Good Quality Material】High-speed steel 6542,tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life .
  • SET INCLUDE: 6pcs per set, including M3*0.5mm, M4*0.7mm, M5*0.8mm, M6*1mm, M8*1.25mm and M10*1.5mm
  • Universal hex shank, compatible with 3-jaw chuck
  • EASY TO USE: Combine drill bit with screw tap, convenient for your processing, time and labor saving
  • WIDE APPLICATION: Drill bit of HSS 4341 is suitable for soft metals such as aluminum alloy, tin alloy, zinc alloy, and drill bit of HSS 6542 is also suitable for the processing of thin iron sheet
  • MATERIAL: High speed steel screw tap drill bits are of high hardness and good abrasion resistance
  • Package include : 4 x Taper andMetric Tap
  • Total Length : 42mm / 1.66"; Shank Dia : 3mm / 0.1"
  • Flute Diameter : 3mm / 0.1";Flute Teeth Pitch : 0.5mm / 0.02"
  • 3 Straight threaded flute;Thread Direction:Right Hand
  • Item name:Metric Tap,Plug type;Material : HSS(High Speed Steel)

More Info

1    2    3    4    5    6    7    8    9    10