Great Spiral Flute Taps. Reviews September, 2021, page 4

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/8"-11 Thread Size, H3 Tolerance - F4643

Search only YG-1 brand name
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/8

Current price: 15.28 USD

Saving: $3.95 (21%)


Check price and availability


  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Greenfield Threading 367909 GT/VTD 1/4-20NC SFGP H3 3FL Plug Fast Spiral Flute Tap

Search only Vermont Tap & Die brand name
Greenfield Threading 367909 GT/VTD 1/4-20NC SFGP H3 3FL Plug Fast Spiral Flute Tap

Current price: 13.39 USD


Check price and availability


Weight: 0.000625 Pounds

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc

More Info

Vermont Tap & Die TN-3112 High-Speed Steel Ground Thread Spiral Point Tap, TiN Coated, Round With Flats, Plug Chamfer, 1/4"-20 Thread Size, H5 Pitch Diameter, 2 Flutes

Search only Greenfield Threading brand name
Vermont Tap & Die TN-3112 High-Speed Steel Ground Thread Spiral Point Tap, TiN Coated, Round With Flats, Plug Chamfer, 1/4

Current price: 12.02 USD


Check price and availability


Height: 0.4 Inches

Length: 3.2 Inches

Width: 0.4 Inches

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc

More Info

Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050

Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050

Current price: 62.4 USD


Check price and availability


Height: 10.236220462 Inches

Length: 1.968503935 Inches

Width: 7.87401574 Inches

Weight: 1.5 Kilograms

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;

More Info

Century Drill & Tool Spiral Flute Screw Extractor, 5 Pc Set (73415)

Search only Century Drill & Tool brand name
Century Drill & Tool Spiral Flute Screw Extractor, 5 Pc Set (73415)

Current price: 16.19 USD


Check price and availability


Height: 0.625 Inches

Length: 2.25 Inches

Width: 3.625 Inches

Weight: 0.11 Pounds

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole

More Info

YG-1 - F8243 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance

Search only YG-1 brand name
YG-1 - F8243 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance

Current price: 9.5 USD

Saving: $0.80 (8%)


Check price and availability


  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

Search only MaxTool brand name
MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

Current price: 19.62 USD


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 90 Grams

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional 1/8 to 3/8 Inch with 1/4 Inch Hex Shank and Spiral Flute Tapping Tool Set Kit Hand Tool of 6pcs

Search only HYMNORQ brand name
Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional 1/8 to 3/8 Inch with 1/4 Inch Hex Shank and Spiral Flute Tapping Tool Set Kit Hand Tool of 6pcs

Current price: 12.89 USD

Saving: $1.00 (7%)


Check price and availability


Weight: 0.22 Pounds

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.

More Info

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

Search only uxcell brand name
uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

Current price: 9.29 USD


Check price and availability


  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch

More Info

YG-1 - F8162 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance

Search only YG-1 brand name
YG-1 - F8162 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance

Current price: 11.19 USD

Saving: $1.11 (9%)


Check price and availability


Weight: 0.02 Pounds

  • 1.09375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Thread size: 1/4-inch; thread tolerance: 2B
  • Thread pitch: 20
  • Thread length (metric): 16.00Mm
  • Thread length: 0.6300-Inch
  • Thread form: unc
  • Thread size: 1/4-inch; thread tolerance: 2b-3b
  • Thread pitch: 20
  • Thread length (metric): 25.40Mm
  • Thread length: 1.0000-Inch
  • Thread form: unc
  • 1/2 - 20 Tap, 27/64'' Drill
  • 3/8'' - 24 Tap, #Q Drill; 7/16 - 20 Tap, 25 - 64'' Drill;
  • 1/4'' - 28 Tap, #3 Drill; 5/16'' - 20 Tap, #F Drill;
  • 10 - 24 Tap, #25 Drill; 10 - 32 Tap, #21 Drill;
  • 6 - 40 Tap, #33 Drill; 8 - 36 Tap, #29 Drill;
  • Made of hardened tempered alloy steel
  • Easily removes 3/32" to 5/8" broken bolts and screws
  • 5 Piece set includes #1 #2 #3 #4 and #5 screw extractors
  • Spiral screw extractors are used when a screw or bolt has broken off while still in the fastening hole
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.3125-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10