Excellent Spiral Flute Taps. Reviews July, 2021, page 9

BQKKWIN 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Drill Flute Metric Taps Set (Black)

More from Tools & Home Improvement
Search only BQKKWIN brand name
BQKKWIN 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Drill Flute Metric Taps Set (Black)

Current price: 12.39 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.

More Info

RedLine Tools - 8-36 Spiral Flute Modified Bottom Tap, H3 Thread Limit - RT34719

More from Tools & Home Improvement
Search only RedLine Tools brand name
RedLine Tools - 8-36 Spiral Flute Modified Bottom Tap, H3 Thread Limit - RT34719

Current price: 10.89 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 2-56 Thread Size, H2 Tolerance

Current price: 10.05 USD

Saving: $2.91 (22%)


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M3.0-0.5 Thread Size, D3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M3.0-0.5 Thread Size, D3 Tolerance

Current price: 7.72 USD

Saving: $5.75 (43%)


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - T5426C T5 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, M10-1.5 Thread Size, D6 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - T5426C T5 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, M10-1.5 Thread Size, D6 Tolerance

Current price: 16.3 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

5pcs TiN Coated HSS Metric Right Hand Spiral Flute Tap Drill bit Metric Taps, M3 M4 M5 M6 M8

More from Tools & Home Improvement
Search only Preamer brand name
5pcs TiN Coated HSS Metric Right Hand Spiral Flute Tap Drill bit Metric Taps, M3 M4 M5 M6 M8

Current price: 11.11 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Material:HSS .Surface treatment: Ti.How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
  • Can tap the bottom of the bline hole.Cutting cannot remain

More Info

Guhring Powertap, M6 x 1.00 Spiral Flute tap, HSS-E (Cobalt), Oxide

More from Tools & Home Improvement
Search only Guhring brand name
Guhring Powertap, M6 x 1.00 Spiral Flute tap, HSS-E (Cobalt), Oxide

Current price: 16.77 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Material:HSS .Surface treatment: Ti.How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
  • Can tap the bottom of the bline hole.Cutting cannot remain

More Info

uxcell Spiral Point Plug Threading Tap UNC 5/16-18 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

More from Tools & Home Improvement
Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 5/16-18 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Current price: 8.59 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Material:HSS .Surface treatment: Ti.How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
  • Can tap the bottom of the bline hole.Cutting cannot remain
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 5/16-18; thread tolerance: H2; thread length: 24mm / 0.94"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/4"-10 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/4

Current price: 32.65 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Material:HSS .Surface treatment: Ti.How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
  • Can tap the bottom of the bline hole.Cutting cannot remain
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 5/16-18; thread tolerance: H2; thread length: 24mm / 0.94"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 1.21875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 C3 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 C3 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 5.55 USD


Check price and availability


  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • .7500 Thread Length
  • 3 Flutes
  • Coating: Uncoated
  • HSS Substrate
  • 2.1250 Overall Length
  • 0.4375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.197-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.512-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Material:HSS .Surface treatment: Ti.How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
  • Can tap the bottom of the bline hole.Cutting cannot remain
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 5/16-18; thread tolerance: H2; thread length: 24mm / 0.94"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • 1.21875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1.25-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10