Wonderful Spiral Flute Taps. Reviews July, 2021, page 7

Drill America T/A57104 #10-32 High Speed Steel 2 Flute Spiral Point Tap, T/A Series

More from Tools & Home Improvement
Search only Drill America brand name
Drill America T/A57104 #10-32 High Speed Steel 2 Flute Spiral Point Tap, T/A Series

Current price: 6.94 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 9/16"-12 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 9/16

Current price: 16.69 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

HHIP 1011-6020 3-56NF H2 2 Flute Spiral Point Tap-Plug

More from Tools & Home Improvement
Search only HHIP brand name
HHIP 1011-6020 3-56NF H2 2 Flute Spiral Point Tap-Plug

Current price: 4.25 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.02 Pounds

  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel

More Info

YG-1 - BS284 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M5.0-0.8 Thread Size, D4 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - BS284 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M5.0-0.8 Thread Size, D4 Tolerance

Current price: 10.23 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Current price: 6.84 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 G5 Series Vanadium Alloy HSS Spiral Flute Tap, TiCN Coated, Round Shank with Square End, Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 G5 Series Vanadium Alloy HSS Spiral Flute Tap, TiCN Coated, Round Shank with Square End, Bottoming Chamfer, M3-0.5 Thread Size, D3 Tolerance

Current price: 12.45 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.374-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Bonsicoky 5PCS HSS Spiral Flute Metric Taps Set (M3 M4 M5 M6 M8), Titanium Coated Metric Machine Thread Tap for Metal Wood Plastic Tapping

More from Tools & Home Improvement
Search only Bonsicoky brand name
Bonsicoky 5PCS HSS Spiral Flute Metric Taps Set (M3 M4 M5 M6 M8), Titanium Coated Metric Machine Thread Tap for Metal Wood Plastic Tapping

Current price: 11.99 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.374-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Wide Use---Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • Sharp Edge---The Spiral Flute Metric Tap adopts a fully automatic fine grinding process to grind sharp threads. Fast cutting, and can be tapped to the bottom of the blind hole.
  • Efficient---With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • High Quality---Spiral Flute Metric Tap is made of high-speed steel, which can significantly improve the hardness and wear resistance of the product, and has good heat resistance, low temperature toughness and fracture toughness.
  • What can you get---5Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 ).Meeting your different size needs in daily life. Whether you are a professional or an amateur, this set of Spiral Flute Metric Tap will be the best choice for drilling and tapping.

More Info

YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M8-1.25 Thread Size, D5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M8-1.25 Thread Size, D5 Tolerance

Current price: 9.8 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.374-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Wide Use---Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • Sharp Edge---The Spiral Flute Metric Tap adopts a fully automatic fine grinding process to grind sharp threads. Fast cutting, and can be tapped to the bottom of the blind hole.
  • Efficient---With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • High Quality---Spiral Flute Metric Tap is made of high-speed steel, which can significantly improve the hardness and wear resistance of the product, and has good heat resistance, low temperature toughness and fracture toughness.
  • What can you get---5Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 ).Meeting your different size needs in daily life. Whether you are a professional or an amateur, this set of Spiral Flute Metric Tap will be the best choice for drilling and tapping.
  • 0.669-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 BW Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M6-1.0 Thread Size, D5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 BW Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, M6-1.0 Thread Size, D5 Tolerance

Current price: 5.48 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.374-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Wide Use---Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • Sharp Edge---The Spiral Flute Metric Tap adopts a fully automatic fine grinding process to grind sharp threads. Fast cutting, and can be tapped to the bottom of the blind hole.
  • Efficient---With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • High Quality---Spiral Flute Metric Tap is made of high-speed steel, which can significantly improve the hardness and wear resistance of the product, and has good heat resistance, low temperature toughness and fracture toughness.
  • What can you get---5Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 ).Meeting your different size needs in daily life. Whether you are a professional or an amateur, this set of Spiral Flute Metric Tap will be the best choice for drilling and tapping.
  • 0.669-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.433-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 C2 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 C2 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Current price: 4.23 USD


Check price and availability


  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 1-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Weight : 0.022 pounds
  • Ground Thread; Ground from solid
  • Size 356NF; H Limit/Flute H-2/2
  • High speed steel
  • 0.354-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.374-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Wide Use---Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • Sharp Edge---The Spiral Flute Metric Tap adopts a fully automatic fine grinding process to grind sharp threads. Fast cutting, and can be tapped to the bottom of the blind hole.
  • Efficient---With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • High Quality---Spiral Flute Metric Tap is made of high-speed steel, which can significantly improve the hardness and wear resistance of the product, and has good heat resistance, low temperature toughness and fracture toughness.
  • What can you get---5Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 ).Meeting your different size needs in daily life. Whether you are a professional or an amateur, this set of Spiral Flute Metric Tap will be the best choice for drilling and tapping.
  • 0.669-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.433-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10