Great Spiral Flute Taps. Reviews July, 2021, page 4

YG-1 - F8483 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F8483 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 13.27 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

MaxTool 3/4-10 Spiral Flute Taps HSS M2 Thread Taps 10 TPI FULLY GROUND RIGHT HAND; SFF02W02R48

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 3/4-10 Spiral Flute Taps HSS M2 Thread Taps 10 TPI FULLY GROUND RIGHT HAND; SFF02W02R48

Current price: 29.46 USD


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 145 Grams

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

More from Tools & Home Improvement
Search only uxcell brand name
uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

Current price: 9.29 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch

More Info

YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 10.8 USD


Check price and availability


Weight: 0.0440924524 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

LANTRO JS - 6pcs Titanium Coated Spiral Flute Taps Set, M3 M4 M5 M6 M8 M10 Metric Thread HSS Drill and Taps Bit Set 1/4" Hex Shank Screw Tapping Tool

More from Tools & Home Improvement
Search only LANTRO JS brand name
LANTRO JS - 6pcs Titanium Coated Spiral Flute Taps Set, M3 M4 M5 M6 M8 M10 Metric Thread HSS Drill and Taps Bit Set 1/4

Current price: 9.29 USD


Check price and availability


Height: 0.393700787 Inches

Length: 3.149606296 Inches

Width: 2.362204722 Inches

Weight: 0.1322773572 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/2

Current price: 13.48 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Guhring Powertap, M4 x 0.70 Spiral Flute tap, HSS-E (Cobalt), Oxide

More from Tools & Home Improvement
Search only Guhring brand name
Guhring Powertap, M4 x 0.70 Spiral Flute tap, HSS-E (Cobalt), Oxide

Current price: 16.77 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

FASTROHY 10 Pcs Micro Taps for Clocks and Watches Tapping,Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

More from Tools & Home Improvement
Search only FASTROHY brand name
FASTROHY 10 Pcs Micro Taps for Clocks and Watches Tapping,Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

Current price: 13.99 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)

More Info

YG-1 - C3443 C3 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - C3443 C3 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 5/16

Current price: 7.24 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 1.125-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8"-24 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 9.46 USD

Saving: $3.24 (26%)


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc.
  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching.
  • Material: M35 HSS (Containing Cobalt); Surface Treatment: Ti Coated
  • Thread Length: 23mm / 0.9 inch; Total Length: 66mm / 2.6 inch
  • Thread Size: M6; Shank Side Width: 4.4mm / 0.17 inch
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • ✅【Wide Applicable】These drill tap bits are must have if you fabricate a lot, they're sharp, and easy to use, suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials
  • ✅【Handy Tools】They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.Complete hole drilling, tapping, and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency
  • ✅【High Versatility】Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill,tap machines
  • ✅【High Efficiency】Taps are designed with spiral flutes, spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing
  • ✅【HSS Meterial】The combination drill tap bits are made of high quality High-Speed Steel with titanium coating, strong hardness and good durability. which greatly improves the cutting performance of the drill, more wear-resistant and long service life
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included:10 x Micro Taps for Clocks and Watches Tapping
  • Thread pitch of straight flute tap is as follows:M1 x 0.25,M1.2 x 0.25,M1.4 x 0.3,M1.6 x 0.35,M1.7 x 0.35,M1.8 x 0.35,M2 x 0.4,M2.5 x 0.45,M3 x 0.5,M3.5 x 0.6
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping;With these machine hand taps, you will have a smooth tapping experience
  • These machine hand taps are ideal for hand machine where metric threads are specified fit for machining nuts or other common thread on the machine
  • Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design,10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
  • 1.125-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10