Exclusive Spiral Flute Taps. Reviews July, 2021, page 2

YG-1 - F8445 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F8445 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16

Current price: 8.35 USD

Saving: $4.54 (35%)


Check price and availability


Weight: 0.110231131 Pounds

  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

ATOPLEE Spiral Flute Tap, 5pcs Titanium Coated HSS 6542 Metric Machine Tap Set M3 M4 M5 M6 M8 [5 Sizes]

More from Tools & Home Improvement
Search only ATOPLEE brand name
ATOPLEE Spiral Flute Tap, 5pcs Titanium Coated HSS 6542 Metric Machine Tap Set M3 M4 M5 M6 M8 [5 Sizes]

Current price: 12.99 USD


Check price and availability


  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.

More Info

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

More from Tools & Home Improvement
Search only Outdoor Gear & Hardware brand name
Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Current price: 14.99 USD


Check price and availability


Weight: 0.110231131 Pounds

  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.

More Info

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance - F4445

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16

Current price: 8.75 USD


Check price and availability


  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H5 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 9.24 USD


Check price and availability


Weight: 0.07 Pounds

  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional 1/8 to 3/8 Inch with 1/4 Inch Hex Shank and Spiral Flute Tapping Tool Set Kit Hand Tool of 6pcs

More from Tools & Home Improvement
Search only Hymnorq brand name
Hymnorq HSS 4341 Imperial 2-in-1 Combination Drill and Tap Bit Set Fractional 1/8 to 3/8 Inch with 1/4 Inch Hex Shank and Spiral Flute Tapping Tool Set Kit Hand Tool of 6pcs

Current price: 12.89 USD

Saving: $1.00 (7%)


Check price and availability


  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.

More Info

uxcell Spiral Point Plug Threading Tap UNC 1/4-20 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

More from Tools & Home Improvement
Search only uxcell brand name
uxcell Spiral Point Plug Threading Tap UNC 1/4-20 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

Current price: 10.99 USD


Check price and availability


  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal

More Info

YILE 7Pcs Spiral Flute Metric Taps M3 M4 M5 M6 M8 M10 M12 HSS Nitriding Coated Metric Machine Screw Thread Tap Set for Metal Wood Plastic Tapping

More from Tools & Home Improvement
Search only YILE brand name
YILE 7Pcs Spiral Flute Metric Taps M3 M4 M5 M6 M8 M10 M12 HSS Nitriding Coated Metric Machine Screw Thread Tap Set for Metal Wood Plastic Tapping

Current price: 8.29 USD


Check price and availability


Height: 0.787401574 Inches

Length: 1.181102361 Inches

Width: 1.968503935 Inches

Weight: 2.42E-7 Pounds

  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • *Package Included: 7 Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 M10 M12).Meeting your different size needs in daily life.
  • *Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • *With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • *Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • *High-speed steel and unique blade design, makes your operation more labor-saving.The surface of the product is treated with nitrogen, which does not rust, very durable.

More Info

YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284

Current price: 9.04 USD


Check price and availability


  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • *Package Included: 7 Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 M10 M12).Meeting your different size needs in daily life.
  • *Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • *With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • *Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • *High-speed steel and unique blade design, makes your operation more labor-saving.The surface of the product is treated with nitrogen, which does not rust, very durable.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4" Diameter x 20 TPI, 1/4-20 Size

More from Tools & Home Improvement
Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4

Current price: 8.99 USD


Check price and availability


Weight: 0.0661386786 Pounds

  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • {Package Included}5pcs Titanium screw tap
  • {Usage}Suitable for processing ordinary thin stainless steel plates, iron plates, etc.
  • {Specifications}001: 3mm*0.5mm ,002: 4mm*0.7mm ,003: 5mm*0.8mm ,004: 6mm*1mm ,005: 8mm*1.25 mm.
  • {Great Machinability} It can be tapped to the bottom of the blind hole, and the chip removal performance is good .
  • {Good Quality Material}The thread tap is made of HSS 6542, more hardness and duralble.The surface treatment is titanium plating,it can protect the tap from corrosion and make the service life longer.
  • sticky materials processing.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • High hardness, fast cutting, wear high temperature.
  • 100% Brand New and High Quantity.
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Quick change 1/4" (6.35mm) hex shank with imperial sizes engraved on the tap drills.
  • 6 imperial sizes of drill and tap bit(1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”) included in the set to meet your diversified requirements
  • Wide flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
  • Drills and taps in a single pass to save your labor and precious time; Point is self-centering and eliminates the need for center drilling or center punching
  • Made of high quality 4341 HSS for durability; Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
  • Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
  • *Package Included: 7 Pcs Spiral Flute Metric Taps( M3 M4 M5 M6 M8 M10 M12).Meeting your different size needs in daily life.
  • *Suitable for drilling, tapping and cutting on soft metals, aluminum sheets and iron. The spiral cuts the debris into a spiral chip, which is more suitable for the processing of blind holes and viscous materials.
  • *With spiral groove taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency; because the chips are unobstructed, the chips will not be blocked in the narrow flutes.
  • *Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly.
  • *High-speed steel and unique blade design, makes your operation more labor-saving.The surface of the product is treated with nitrogen, which does not rust, very durable.
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 2 Flutes
  • 2-1/2 Overall Length
  • 1 Thread Length
  • .255 Shank Diameter
  • Made In the USA

More Info

1    2    3    4    5    6    7    8    9    10