High rated Spiral Flute Taps. Reviews July, 2021, page 1

YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8

Current price: 8.07 USD


Check price and availability


Weight: 0.0661386786 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only HARKY brand name
HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16

Current price: 8.35 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG1 TG836SET8-1 | 3 Flute Spiral HSS-Ex TiCN Coated Combo Tap Set

More from Tools & Home Improvement
Search only YG1 brand name
YG1 TG836SET8-1 | 3 Flute Spiral HSS-Ex TiCN Coated Combo Tap Set

Current price: 144.05 USD


Check price and availability


Weight: 0.63 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1

More Info

YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 11.1 USD


Check price and availability


Weight: 0.0661386786 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance

Current price: 6.73 USD


Check price and availability


Weight: 0.0220462262 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

More from Tools & Home Improvement
Search only Rocaris brand name
Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

Current price: 17.99 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.

More Info

YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2

Current price: 11.14 USD


Check price and availability


Weight: 0.1 Pounds

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

More from Tools & Home Improvement
Search only YAKAMOZ brand name
Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

Current price: 14.99 USD


Check price and availability


Height: 0.4330708657 Inches

Length: 5.511811018 Inches

Width: 3.149606296 Inches

  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12

More Info

YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Current price: 6.69 USD


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

YG-1 - F4423 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-28 Thread Size, H3 Tolerance

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - F4423 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4

Current price: 8.59 USD

Saving: $0.68 (7%)


Check price and availability


  • 0.75-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.6875-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Improves thread quality and chip evacuation.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20
  • Our part # YG1-TG836SET8-1
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.5-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
  • 0.9375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
  • 0.375-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 0.625-inches thread length
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

1    2    3    4    5    6    7    8    9    10