Best Spiral Flute Taps. MaxTool brand. New releases 2021

MaxTool 3/4-10 Spiral Flute Taps HSS M2 Thread Taps 10 TPI FULLY GROUND RIGHT HAND; SFF02W02R48

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 3/4-10 Spiral Flute Taps HSS M2 Thread Taps 10 TPI FULLY GROUND RIGHT HAND; SFF02W02R48

Current price: 29.95 USD

Saving: $4.50 (13%)


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 145 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40

Current price: 19.62 USD


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 90 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 11/16-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R44

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 11/16-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R44

Current price: 26.72 USD


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 115 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 1/2-13 Spiral Flute Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SFF02W02R32

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 1/2-13 Spiral Flute Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SFF02W02R32

Current price: 18 USD


Check price and availability


Height: 0.63 Inches

Length: 5 Inches

Width: 0.88 Inches

Weight: 55 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 7/16-14 Spiral Flute Taps HSS M2 Thread Taps 14 TPI FULLY GROUND RIGHT HAND; SFF02W02R28

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 7/16-14 Spiral Flute Taps HSS M2 Thread Taps 14 TPI FULLY GROUND RIGHT HAND; SFF02W02R28

Current price: 14.78 USD


Check price and availability


Height: 0.63 Inches

Length: 5 Inches

Width: 0.88 Inches

Weight: 40 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool M20x2.5 Spiral Flute Taps HSS M2 Thread Taps Metric Taps Pitch 2.5 mm FULLY GROUND RIGHT HAND; SFM02W02R20

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool M20x2.5 Spiral Flute Taps HSS M2 Thread Taps Metric Taps Pitch 2.5 mm FULLY GROUND RIGHT HAND; SFM02W02R20

Current price: 27.67 USD

Saving: $4.15 (13%)


Check price and availability


Height: 0.88 Inches

Length: 6 Inches

Width: 1.25 Inches

Weight: 180 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 20 mm; Pitch: 2.5 mm
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 3/8-16 Spiral Flute Taps HSS M2 Thread Taps 16 TPI FULLY GROUND RIGHT HAND; SFF02W02R24

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 3/8-16 Spiral Flute Taps HSS M2 Thread Taps 16 TPI FULLY GROUND RIGHT HAND; SFF02W02R24

Current price: 12.16 USD


Check price and availability


Height: 0.4 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 40 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 20 mm; Pitch: 2.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/8"; Pitch: 16 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 9/16-12 Spiral Flute Taps HSS M2 Thread Taps 12 TPI FULLY GROUND RIGHT HAND; SFF02W02R36

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 9/16-12 Spiral Flute Taps HSS M2 Thread Taps 12 TPI FULLY GROUND RIGHT HAND; SFF02W02R36

Current price: 18 USD


Check price and availability


Height: 0.88 Inches

Length: 5 Inches

Width: 1.07 Inches

Weight: 75 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 20 mm; Pitch: 2.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/8"; Pitch: 16 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 9/16"; Pitch: 12 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 8-32NC Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 32 TPI FULLY GROUND RIGHT HAND; SPN02W01R08

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 8-32NC Spiral Point Taps HSS M2 Thread Taps Wire Gauge/Numbered Taps 32 TPI FULLY GROUND RIGHT HAND; SPN02W01R08

Current price: 8.82 USD


Check price and availability


Height: 0.3 Inches

Length: 7.25 Inches

Width: 2 Inches

Weight: 40 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 20 mm; Pitch: 2.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/8"; Pitch: 16 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 9/16"; Pitch: 12 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.8; Pitch: 32 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

MaxTool 1/2-13 NC Spiral Point Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SPF02W01R32

More from Tools & Home Improvement
Search only MaxTool brand name
MaxTool 1/2-13 NC Spiral Point Taps HSS M2 Thread Taps 13 TPI FULLY GROUND RIGHT HAND; SPF02W01R32

Current price: 14.78 USD


Check price and availability


Height: 0.63 Inches

Length: 5 Inches

Width: 0.88 Inches

Weight: 55 Grams

  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/4"; Pitch: 10 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 5/8"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 11/16"; Pitch: 11 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 7/16"; Pitch: 14 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 20 mm; Pitch: 2.5 mm
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 3/8"; Pitch: 16 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
  • Normal Diameter: 9/16"; Pitch: 12 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: No.8; Pitch: 32 TPI
  • The premium high speed steel M2 material provides long tool life
  • The uncoated surface finish can be used on a broad range of materials
  • The round shank with square driver makes the taps suitable for hand or power-driven applications
  • Suit for threading through holes in all kinds of materials
  • Normal Diameter: 1/2"; Pitch: 13 TPI
  • The premium high speed steel M2 material provides long tool life

More Info

1    2    3    4    5    6    7    8