Exclusive Soldering Flux. Reviews August, 2021, page 2

MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

More from Industrial & Scientific
Search only MG Chemicals brand name
MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

Current price: 16.65 USD


Check price and availability


Height: 0.16 Inches

Length: 0.16 Inches

Width: 0.47 Inches

Weight: 0.0440924524 Pounds

Warranty: [email protected]

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability

More Info

Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick

More from Industrial & Scientific
Search only Lesnow brand name
Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll in Handy Dispenser goot wick

Current price: 4.99 USD


Check price and availability


Height: 0.5 Inches

Length: 5 Inches

Width: 4 Inches

Weight: 0.3 ounces

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more

More Info

La-Co-22194 WaterSoluble, All Weather Flux, 4 oz

More from Industrial & Scientific
Search only La-Co brand name
La-Co-22194 WaterSoluble, All Weather Flux, 4 oz

Current price: 5.1 USD

Saving: $1.55 (23%)


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.35 Pounds

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety

More Info

RadioShack Rosin Soldering Flux Paste, Non-Spill - Made in USA - 2 oz. Jar

More from Industrial & Scientific
Search only RadioShack brand name
RadioShack Rosin Soldering Flux Paste, Non-Spill - Made in USA - 2 oz. Jar

Current price: 8.99 USD

Saving: $0.50 (5%)


Check price and availability


Width: 3.8 Inches

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs

More Info

MG Chemicals 8342 RA Rosin Flux Paste, Amber, 50 g Jar (8342-50G)

More from Industrial & Scientific
Search only MG Chemicals brand name
MG Chemicals 8342 RA Rosin Flux Paste, Amber, 50 g Jar (8342-50G)

Current price: 7.95 USD


Check price and availability


Weight: 0.220462262 Pounds

Warranty: [email protected]

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability

More Info

Chip Quik RA891 Rosin Solder Flux (RA) in 2oz Flat Jar 50 gram

More from Industrial & Scientific
Search only Chip Quik brand name
Chip Quik RA891 Rosin Solder Flux (RA) in 2oz Flat Jar 50 gram

Current price: 7.95 USD


Check price and availability


Height: 1 Inches

Length: 2.5 Inches

Width: 2.5 Inches

Weight: 0.110231131 Pounds

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability
  • Solder Flux
  • ROM1
  • Rosin Activated

More Info

Handy Flux, 7 Ounce Jar with Brush | SOL-950.01

More from Industrial & Scientific
Search only EURO TOOL brand name
Handy Flux, 7 Ounce Jar with Brush | SOL-950.01

Current price: 9.86 USD


Check price and availability


Height: 2 Inches

Length: 3.8 Inches

Width: 2.1 Inches

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability
  • Solder Flux
  • ROM1
  • Rosin Activated
  • 7 ounce jar with a brush
  • Can be cleaned up with hot water
  • Begins to melt and dissolve oxides at 600 degrees Fahrenheit
  • Protects parts up to 1600 degrees Fahrenheit
  • Great for soldering and pickling

More Info

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)

More from Industrial & Scientific
Search only MAIYUM brand name
MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)

Current price: 8.59 USD


Check price and availability


Height: 2.17 Inches

Length: 2.17 Inches

Width: 1.18 Inches

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability
  • Solder Flux
  • ROM1
  • Rosin Activated
  • 7 ounce jar with a brush
  • Can be cleaned up with hot water
  • Begins to melt and dissolve oxides at 600 degrees Fahrenheit
  • Protects parts up to 1600 degrees Fahrenheit
  • Great for soldering and pickling
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
  • √ Flux content 1.8%,electrical soldering wire dia is 0.8mm (0.0315inch),gross weight 50gram (0.11lbs),good size for pocket
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)
  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire

More Info

Soldering Iron Kit, Soldering Kit 60W Electronics Soldering Iron LCD Digital Adjustable Temperature On Off Switch Soldering Gun Solder Kit and Welding Tool with Solder Wire Flux Solder Tips Carry Bag

More from Industrial & Scientific
Search only YONSAW brand name
Soldering Iron Kit, Soldering Kit 60W Electronics Soldering Iron LCD Digital Adjustable Temperature On Off Switch Soldering Gun Solder Kit and Welding Tool with Solder Wire Flux Solder Tips Carry Bag

Current price: 24.99 USD


Check price and availability


Weight: 0.3086471668 Pounds

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability
  • Solder Flux
  • ROM1
  • Rosin Activated
  • 7 ounce jar with a brush
  • Can be cleaned up with hot water
  • Begins to melt and dissolve oxides at 600 degrees Fahrenheit
  • Protects parts up to 1600 degrees Fahrenheit
  • Great for soldering and pickling
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
  • √ Flux content 1.8%,electrical soldering wire dia is 0.8mm (0.0315inch),gross weight 50gram (0.11lbs),good size for pocket
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)
  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
  • 100% SATISFACTION PROMISE - Your satisfaction is our top priority. We provide a lifetime satisfaction on our solder kit. Just contact us If the soldering iron kit doesn’t live up your expectations, we will offer 100% satisfied solution for you.
  • WIDELY USED AND PORTABLE CARRY: Widely used for solder electronic circuit boards, appliance repair, Home DIY hobbyists, jewelry welding and repair, computer phone repairs, pyrography,ect. It's easy to be used no matter electronics hobbyist or beginner study electronic engineering. Come with a storage bag, you can store all the soldering iron tools and take it to anywhere.
  • PRECISE 1 DEGREE TEMP CONTROLLED WITH DIGITAL DISPLAY: 200℃-500℃ (392°F- 932°F) can be controlled freely, effectively improve work efficiency. You can accurately adjust the temperature within 1-Degree increments, A high-definition LCD screen display, the temperature status more clearly. With ℃ to℉ conversion function.
  • HEAT UP QUICKLY AND ON/OFF SWITCH : The soldering iron features a high-power heating core, which can heat up to operating temperatures in 20 seconds, high temperature stability, can protect your welding objects. 4 cooling holes to ensure fast coolingand and effectively extend life. The soldering iron with on-off switch, convenience for you to turn it off anytime if you don't need to use it.
  • PROFESSIONAL COMPLETE SOLDERING KIT : Soldering iron kit comes with 110V 60W soldering iron, 5 multiple soldering tips, 50g 0.8mm solder wire, 50g no-clean solder rosin flux paste, desoldering pump, a stand with cleaning sponge, tweezers, a carry bag keeps all the components organized. A good basic soldering iron set that enough to meet the needs of any electronics hobbyist's daily welder work.

More Info

Novacan Old Masters Flux - 8 Oz

More from Industrial & Scientific
Search only Novacan Industries brand name
Novacan Old Masters Flux - 8 Oz

Current price: 10.29 USD

Saving: $0.96 (9%)


Check price and availability


Height: 7 Inches

Length: 4.2 Inches

Width: 6.5 Inches

Weight: 0.7 Pounds

  • Thixotropic paste; RoHS compliant
  • Compatible with lead free and leaded solder systems
  • After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
  • Instant wetting
  • Superior fluxing ability
  • 🌟the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • 🌟the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • Package Dimensions: 2.4" L x 2.4" W x 2.8" H
  • Manufacturer: La-Co
  • Country of Manifacturer: United States
  • Occupational Health & Safety
  • RadioShack Catalog №: 6400022 (64-022, 640-0022)
  • Made in USA
  • No-spill formulation, easy to clean if needed (not required)
  • Apply flux when soldering to produce strong solder joints
  • The best flux for electrical and electronics repairs
  • Rohs compliant
  • Perfect flux for electronic repairs
  • Long tack time
  • High tack force
  • Excellent wettability
  • Solder Flux
  • ROM1
  • Rosin Activated
  • 7 ounce jar with a brush
  • Can be cleaned up with hot water
  • Begins to melt and dissolve oxides at 600 degrees Fahrenheit
  • Protects parts up to 1600 degrees Fahrenheit
  • Great for soldering and pickling
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
  • √ Flux content 1.8%,electrical soldering wire dia is 0.8mm (0.0315inch),gross weight 50gram (0.11lbs),good size for pocket
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)
  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
  • 100% SATISFACTION PROMISE - Your satisfaction is our top priority. We provide a lifetime satisfaction on our solder kit. Just contact us If the soldering iron kit doesn’t live up your expectations, we will offer 100% satisfied solution for you.
  • WIDELY USED AND PORTABLE CARRY: Widely used for solder electronic circuit boards, appliance repair, Home DIY hobbyists, jewelry welding and repair, computer phone repairs, pyrography,ect. It's easy to be used no matter electronics hobbyist or beginner study electronic engineering. Come with a storage bag, you can store all the soldering iron tools and take it to anywhere.
  • PRECISE 1 DEGREE TEMP CONTROLLED WITH DIGITAL DISPLAY: 200℃-500℃ (392°F- 932°F) can be controlled freely, effectively improve work efficiency. You can accurately adjust the temperature within 1-Degree increments, A high-definition LCD screen display, the temperature status more clearly. With ℃ to℉ conversion function.
  • HEAT UP QUICKLY AND ON/OFF SWITCH : The soldering iron features a high-power heating core, which can heat up to operating temperatures in 20 seconds, high temperature stability, can protect your welding objects. 4 cooling holes to ensure fast coolingand and effectively extend life. The soldering iron with on-off switch, convenience for you to turn it off anytime if you don't need to use it.
  • PROFESSIONAL COMPLETE SOLDERING KIT : Soldering iron kit comes with 110V 60W soldering iron, 5 multiple soldering tips, 50g 0.8mm solder wire, 50g no-clean solder rosin flux paste, desoldering pump, a stand with cleaning sponge, tweezers, a carry bag keeps all the components organized. A good basic soldering iron set that enough to meet the needs of any electronics hobbyist's daily welder work.
  • 8 oz
  • Cleans up easily with water
  • All-purpose zinc flux
  • Novacan Old Masters Flux

More Info

1    2    3    4    5    6    7    8    9    10