Best Soldering Flux. SRA-Soldering-Products brand. New releases 2021

SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar

Current price: 8.99 USD


Check price and availability


Height: 3 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.125 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs

More Info

SRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml - Refillable

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml - Refillable

Current price: 9.08 USD

Saving: $0.91 (9%)


Check price and availability


Height: 0.3 Inches

Length: 5.4 Inches

Width: 1 Inches

Weight: 0.0625 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints

More Info

SRA Soldering Products Rosin Paste Flux #135 in A 2 oz Jar & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products Rosin Paste Flux #135 in A 2 oz Jar & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098

Current price: 18.73 USD


Check price and availability


  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs

More Info

SRA Soldering Products WBCL/M32 Acid Flux Core Low Melt Solder, 50/32/18 .032-Inch, 1-Pound Spool

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products WBCL/M32 Acid Flux Core Low Melt Solder, 50/32/18 .032-Inch, 1-Pound Spool

Current price: 33.6 USD


Check price and availability


Height: 4 Inches

Length: 3 Inches

Width: 3 Inches

Weight: 0.7 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder

More Info

Lead Free No-Clean Flux Core Silver Solder, SAC305 .031-Inch, 4 Ounce Spool

More from Industrial & Scientific
Search only SRA Soldering Products brand name
Lead Free No-Clean Flux Core Silver Solder, SAC305 .031-Inch, 4 Ounce Spool

Current price: 20.99 USD


Check price and availability


Height: 4 Inches

Length: 2 Inches

Width: 1 Inches

Weight: 1 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder

More Info

SRA Soldering Products Lead Free No-Clean Flux Core Silver Solder, SAC305 .031-Inch, 2 Ounce Spool (WBNCSAC32-2OZ)

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products Lead Free No-Clean Flux Core Silver Solder, SAC305 .031-Inch, 2 Ounce Spool (WBNCSAC32-2OZ)

Current price: 15.04 USD

Saving: $1.11 (7%)


Check price and availability


Height: 4 Inches

Length: 2 Inches

Width: 1 Inches

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • Melts at 430 Degrees F(221 Degrees C)
  • For use on Circuit Boards and flux reside is non-corrosive
  • No-Clean Flux Core
  • Excellent quality general purpose solder

More Info

SRA Soldering Products Rosin Paste Flux #135 in A 2 oz Jar & Hakko 599B-02 Solder Tip Cleaning Wire and Holder, 1 Pack

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products Rosin Paste Flux #135 in A 2 oz Jar & Hakko 599B-02 Solder Tip Cleaning Wire and Holder, 1 Pack

Current price: 19.63 USD


Check price and availability


  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • Melts at 430 Degrees F(221 Degrees C)
  • For use on Circuit Boards and flux reside is non-corrosive
  • No-Clean Flux Core
  • Excellent quality general purpose solder
  • Product 2: Does not cause premature wear of soldering iron tips
  • Product 2: Will not reduce the tip temperature
  • Product 2: No water required
  • Product 2: Cleans better than conventional sponges
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs

More Info

SRA Soldering Products PEN_RMA SRA #99-20 Rosin Rma Soldering Flux Pen - Refillable

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products PEN_RMA SRA #99-20 Rosin Rma Soldering Flux Pen - Refillable

Current price: 9.03 USD


Check price and availability


Height: 8 Inches

Length: 2 Inches

Width: 0.6 Inches

Weight: 0.05 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • Melts at 430 Degrees F(221 Degrees C)
  • For use on Circuit Boards and flux reside is non-corrosive
  • No-Clean Flux Core
  • Excellent quality general purpose solder
  • Product 2: Does not cause premature wear of soldering iron tips
  • Product 2: Will not reduce the tip temperature
  • Product 2: No water required
  • Product 2: Cleans better than conventional sponges
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Compatible with lead and lead-free solders
  • Environmentally friendly Refillable pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of a rma rosin flux
  • For rework and touch-up of smt, SMD, and through hole solder joints

More Info

Aoyue 469 Kit includes 60 Watt Soldering Station, Solder Wire, Flux, Fast Chip Removal Alloy, Tip Cleaner, Desoldering Pump and Solder Wick

More from Industrial & Scientific
Search only Aoyue brand name
Aoyue 469 Kit includes 60 Watt Soldering Station, Solder Wire, Flux, Fast Chip Removal Alloy, Tip Cleaner, Desoldering Pump and Solder Wick

Current price: 49.8 USD


Check price and availability


Height: 8 Inches

Length: 5 Inches

Width: 8 Inches

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • Melts at 430 Degrees F(221 Degrees C)
  • For use on Circuit Boards and flux reside is non-corrosive
  • No-Clean Flux Core
  • Excellent quality general purpose solder
  • Product 2: Does not cause premature wear of soldering iron tips
  • Product 2: Will not reduce the tip temperature
  • Product 2: No water required
  • Product 2: Cleans better than conventional sponges
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Compatible with lead and lead-free solders
  • Environmentally friendly Refillable pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of a rma rosin flux
  • For rework and touch-up of smt, SMD, and through hole solder joints
  • Also Include Fast Chip Removal Alloy (6.5 inch piece), Desoldering Pump and a TY-98 Soldering Iron Tip Cleaner
  • The Soldering Kit includes the Aoyue 469 iron, TF5000 Tacky Flux, Solder Wick, 2 oz Spool of 63/37 Solder Wire
  • Temperature range 200-480° C (392-897° F)
  • PTC Element for fast heat up and accurate temperature control
  • HIGH PERFORMANCE - 70 Watts of system power. 60 watt iron power depending on the type of iron used. There are 50 available soldering tips to fit this station to meet all your soldering needs

More Info

SRA Soldering Products WBC60/4062 Acid Flux Core Solder, 60/40 .062-Inch, 1-Pound Spool

More from Industrial & Scientific
Search only SRA Soldering Products brand name
SRA Soldering Products WBC60/4062 Acid Flux Core Solder, 60/40 .062-Inch, 1-Pound Spool

Current price: 23.85 USD

Saving: $13.68 (36%)


Check price and availability


Height: 4 Inches

Length: 3 Inches

Width: 3 Inches

Weight: 1.05 Pounds

  • Made in USA
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Does not need to be cleaned
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Formulated for use with tin/lead and lead-free alloys
  • Contains 2 ounce in a "Hockey puck" Jar
  • The ideal flux for electrical and electronic repairs
  • Compatible with Lead and Lead-Free Solders
  • Environmentally Friendly Refillable Pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of No-Clean Low Solids Flux
  • For rework and touch-up of SMT, SMD, and through hole solder joints
  • Product 2: Available with standard or anti-static bobbins
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Melts at 293DegreeF.(145DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder
  • For use on Circuit Boards and flux reside is non-corrosive
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • No-Clean Flux Core
  • Melts at 430 Degrees F (221 Degrees C)
  • Excellent quality general purpose solder
  • Contains: 96.5%Sn / 3% Ag / 0.5%Cu
  • Melts at 430 Degrees F(221 Degrees C)
  • For use on Circuit Boards and flux reside is non-corrosive
  • No-Clean Flux Core
  • Excellent quality general purpose solder
  • Product 2: Does not cause premature wear of soldering iron tips
  • Product 2: Will not reduce the tip temperature
  • Product 2: No water required
  • Product 2: Cleans better than conventional sponges
  • Product 1: Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Product 1: Formulated for use with tin/lead and lead-free alloys
  • Product 1: Contains 2 ounce in a "Hockey puck" Jar
  • Product 1: The ideal flux for electrical and electronic repairs
  • Compatible with lead and lead-free solders
  • Environmentally friendly Refillable pen
  • Suitable for automotive, computer, telecom
  • Contains 10 ml of a rma rosin flux
  • For rework and touch-up of smt, SMD, and through hole solder joints
  • Also Include Fast Chip Removal Alloy (6.5 inch piece), Desoldering Pump and a TY-98 Soldering Iron Tip Cleaner
  • The Soldering Kit includes the Aoyue 469 iron, TF5000 Tacky Flux, Solder Wick, 2 oz Spool of 63/37 Solder Wire
  • Temperature range 200-480° C (392-897° F)
  • PTC Element for fast heat up and accurate temperature control
  • HIGH PERFORMANCE - 70 Watts of system power. 60 watt iron power depending on the type of iron used. There are 50 available soldering tips to fit this station to meet all your soldering needs
  • Melts at 361-374DegreeF.(183-190DegreeC)
  • Residue is corrosive and must be washed with hot water. Works with Stainless Steel
  • For use on highly oxidized and difficult to solder metals
  • Acid Core Solder has a highly active flux for common metals
  • Excellent quality general purpose solder

More Info

1    2    3    4    5