Best Router Spiral Bits. Reviews June, 2021

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Search only Whiteside Router Bits brand name
Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Current price: 19.54 USD

Saving: $1.52 (7%)


Check price and availability


Height: 5.5 Inches

Length: 2 Inches

Width: 3 Inches

Weight: 0.06 Pounds

  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide

More Info

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

Search only MLCS brand name
MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

Current price: 69.99 USD

Saving: $29.96 (30%)


Check price and availability


  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.

More Info

Freud 1/4" (Dia.) Solid Carbide Up Spiral Bit with 1/4" Shank (75-102)

Search only Freud brand name
Freud 1/4

Current price: 19.08 USD

Saving: $3.04 (14%)


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.08 Pounds

  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank

More Info

Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral Set 2 Bit 1/4-Inch Shank 14220

Search only Yonico brand name
Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral Set 2 Bit 1/4-Inch Shank 14220

Current price: 35.43 USD

Saving: $12.52 (26%)


Check price and availability


Height: 0.25 Inches

Length: 3 Inches

Width: 0.25 Inches

  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"

More Info

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

Search only SpeTool brand name
SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

Current price: 21.59 USD


Check price and availability


  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length

More Info

SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver

Search only SpeTool brand name
SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver

Current price: 15.68 USD


Check price and availability


  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

More Info

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Search only Whiteside Router Bits brand name
Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Current price: 40.09 USD

Saving: $3.11 (7%)


Check price and availability


Height: 5.5 Inches

Length: 2 Inches

Width: 3 Inches

Weight: 1.1 Pounds

  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
  • Industrial Quality
  • Spiral Flush Trim Up Cut
  • RFT2100

More Info

Whiteside Ultimate Trim Combination Router Bit

Search only Whiteside brand name
Whiteside Ultimate Trim Combination Router Bit

Current price: 174 USD


Check price and availability


Height: 1.15 Inches

Length: 1.2 Inches

Width: 5.7 Inches

  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
  • Industrial Quality
  • Spiral Flush Trim Up Cut
  • RFT2100
  • Combination bit design with top and bottom bearing
  • Novice approved for creating perfect edges
  • 7/8" diameter for higher shear angles
  • Compression spiral technology

More Info

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

Search only SpeTool brand name
SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

Current price: 19.99 USD


Check price and availability


  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
  • Industrial Quality
  • Spiral Flush Trim Up Cut
  • RFT2100
  • Combination bit design with top and bottom bearing
  • Novice approved for creating perfect edges
  • 7/8" diameter for higher shear angles
  • Compression spiral technology
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length

More Info

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank, 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

Search only SpeTool brand name
SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank, 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

Current price: 30.99 USD


Check price and availability


  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • 1/4-Inch and 1/2-Inch shanks.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • Perfect for deep mortises and cutting dadoes in a router table.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Solid micro grain carbide cuts smooth and stays sharp.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
  • Overall Dia. (D) 1/4", Cutting Length (h) 1", 2 Flute(s), 1/4" Shank
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on table mount and handheld router
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • Flush trim all types of material for a perfect finish
  • Small Diameter - 3/8" Cutter Length A - 3/16" Cutter Length B - 1/4"
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
  • Industrial Quality
  • Spiral Flush Trim Up Cut
  • RFT2100
  • Combination bit design with top and bottom bearing
  • Novice approved for creating perfect edges
  • 7/8" diameter for higher shear angles
  • Compression spiral technology
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length
  • Industrial quality control to ensure best performance
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length

More Info

1    2    3    4    5    6    7    8    9    10