Best Rebar. Anbull brand. New releases 2021

Anbull 900W Electric Rebar Bender,Hydraulic Rebar Bending Maching Bending up to 5/8 Inch #5 16mm Rebar, Bending Angle 0-130¡ãRebar Bending Machine with Positioning Bolt

More from Industrial & Scientific
Search only Anbull brand name
Anbull 900W Electric Rebar Bender,Hydraulic Rebar Bending Maching Bending up to 5/8 Inch #5 16mm Rebar, Bending Angle 0-130¡ãRebar Bending Machine with Positioning Bolt

Current price: 489.99 USD


Check price and availability


  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.

More Info

Anbull 1350W Electric Rebar Cutter, Cutting up to 7/8 Inch 4-22mm #7 Rebar, with Replaceable Jaw Blades, Cutting Speed 3.5-4S (1350W RC-22)

More from Industrial & Scientific
Search only Anbull brand name
Anbull 1350W Electric Rebar Cutter, Cutting up to 7/8 Inch 4-22mm #7 Rebar, with Replaceable Jaw Blades, Cutting Speed 3.5-4S (1350W RC-22)

Current price: 439.99 USD


Check price and availability


Height: 9.0551 Inches

Length: 16.5354 Inches

Width: 4.7244 Inches

  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.
  • One Year Warranty: Apart from 1 year warranty provided against manufacture defects, we offer one extra set of free universal blades and a pair of well-tailored, soft gloves in the portable stainless container for your convenience.
  • One Button Operation: Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. Ergonomic grip design of our rebar cutter facilitates maneuverability and ease of use and safety.
  • Pure Copper Coil Motor: Pure copper coil motor 1350W powered by hydraulic pump ensure higher reliability of hydraulic rebar cutter, which means excellent motivation yet low noise, cutting at a lightning speed. The needle bearing drives the motor to rotate, allowing the motor to run more smoothly to achieve the minimum friction and the minimum power consumption.
  • Wide Cutting Range and Fast Cutting Speed: Cutting capacity ranges from 3/20"(4mm) to 7/8"(22mm). Cutting speed 3.5-4s which can satisfies your various cutting demand. Replaceable sharp alloy steel blades with 4 sides reversible cutter jaws realizes manual-like precision.
  • Updated Cr12MoV Replaceable Blade: With sophisticated blade processing technology and strict quality control, we utilize upgraded Cr12MoV blades that would not deform easily and serve you longer. The high density and high impact resistant PVC material shell allows for a longer service life and excellent heat dissipation.

More Info

Anbull Electric Rebar Cutter Blades for 5/8Inch 16mm #5 Electric Rebar Cutter 6 Pcs Blades with 12 Hexagon Screw and 12 Spring Washer

More from Industrial & Scientific
Search only Anbull brand name
Anbull Electric Rebar Cutter Blades for 5/8Inch 16mm #5 Electric Rebar Cutter 6 Pcs Blades with 12 Hexagon Screw and 12 Spring Washer

Current price: 29.99 USD


Check price and availability


  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.
  • One Year Warranty: Apart from 1 year warranty provided against manufacture defects, we offer one extra set of free universal blades and a pair of well-tailored, soft gloves in the portable stainless container for your convenience.
  • One Button Operation: Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. Ergonomic grip design of our rebar cutter facilitates maneuverability and ease of use and safety.
  • Pure Copper Coil Motor: Pure copper coil motor 1350W powered by hydraulic pump ensure higher reliability of hydraulic rebar cutter, which means excellent motivation yet low noise, cutting at a lightning speed. The needle bearing drives the motor to rotate, allowing the motor to run more smoothly to achieve the minimum friction and the minimum power consumption.
  • Wide Cutting Range and Fast Cutting Speed: Cutting capacity ranges from 3/20"(4mm) to 7/8"(22mm). Cutting speed 3.5-4s which can satisfies your various cutting demand. Replaceable sharp alloy steel blades with 4 sides reversible cutter jaws realizes manual-like precision.
  • Updated Cr12MoV Replaceable Blade: With sophisticated blade processing technology and strict quality control, we utilize upgraded Cr12MoV blades that would not deform easily and serve you longer. The high density and high impact resistant PVC material shell allows for a longer service life and excellent heat dissipation.
  • 【Quality Control】 Strictly control the 13.5mm hole distance of each rebar cutter blade to be accurate and consistent.
  • 【Applicable model】(RC-16) 5/8" 16mm #5 electric rebar cutter. RS-20 & RA-20 are also applicable. Screw set and washer nuts are also provided for your convenient replacement.
  • 【High utility ratio】 Change the direction of the blade, the chamfered blade can be reused 2 times, and the right-angle blade can be reused 4 times. 
  • 【Chamfer design】 Spread the load evenly on more area to extend the service life of the rebar cutter replacement blade.
  • 【Upgraded D2 material】 Compared with Morv12, it has higher hardness up to HRC 58 and more wear-resistant after being quenched and forged in high temperature.

More Info

Anbull Concrete Hole Saw Kit for SDS Plus or SDS Max Hammer Drills, 30 40 65 80 100mm Hole Saw Drill Bit Set w/ SDS Plus & SDS Max Shanks for Brick Concrete Cement Stone Wall Drilling Hole Saw Cutter

More from Industrial & Scientific
Search only Anbull brand name
Anbull Concrete Hole Saw Kit for SDS Plus or SDS Max Hammer Drills, 30 40 65 80 100mm Hole Saw Drill Bit Set w/ SDS Plus & SDS Max Shanks for Brick Concrete Cement Stone Wall Drilling Hole Saw Cutter

Current price: 79.99 USD


Check price and availability


  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.
  • One Year Warranty: Apart from 1 year warranty provided against manufacture defects, we offer one extra set of free universal blades and a pair of well-tailored, soft gloves in the portable stainless container for your convenience.
  • One Button Operation: Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. Ergonomic grip design of our rebar cutter facilitates maneuverability and ease of use and safety.
  • Pure Copper Coil Motor: Pure copper coil motor 1350W powered by hydraulic pump ensure higher reliability of hydraulic rebar cutter, which means excellent motivation yet low noise, cutting at a lightning speed. The needle bearing drives the motor to rotate, allowing the motor to run more smoothly to achieve the minimum friction and the minimum power consumption.
  • Wide Cutting Range and Fast Cutting Speed: Cutting capacity ranges from 3/20"(4mm) to 7/8"(22mm). Cutting speed 3.5-4s which can satisfies your various cutting demand. Replaceable sharp alloy steel blades with 4 sides reversible cutter jaws realizes manual-like precision.
  • Updated Cr12MoV Replaceable Blade: With sophisticated blade processing technology and strict quality control, we utilize upgraded Cr12MoV blades that would not deform easily and serve you longer. The high density and high impact resistant PVC material shell allows for a longer service life and excellent heat dissipation.
  • 【Quality Control】 Strictly control the 13.5mm hole distance of each rebar cutter blade to be accurate and consistent.
  • 【Applicable model】(RC-16) 5/8" 16mm #5 electric rebar cutter. RS-20 & RA-20 are also applicable. Screw set and washer nuts are also provided for your convenient replacement.
  • 【High utility ratio】 Change the direction of the blade, the chamfered blade can be reused 2 times, and the right-angle blade can be reused 4 times. 
  • 【Chamfer design】 Spread the load evenly on more area to extend the service life of the rebar cutter replacement blade.
  • 【Upgraded D2 material】 Compared with Morv12, it has higher hardness up to HRC 58 and more wear-resistant after being quenched and forged in high temperature.
  • Please note: This hole saw can not be used for marble, pebbles, and to avoid rebar in cement walls. Please use use it with an electric hammer drill instead of an electric drill.
  • Quality Assurance: We provide satisfactory customer service. If the product has quality problems, it can be replaced or refunded.
  • Wide Application: This masonry hole saw kit can drill through common walls and floors made of brick, concrete, cement and stone, making it easier to install air conditioners, water pipes, water heaters, smoke pipes, sewers, etc.!
  • Premium Material: This Concrete Hole Saw Cutter Set is made of high-quality Cemented Carbide and is packaged in a customized box. High-quality and portable for long-term use.
  • Perfect Design: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is convenient to use with four-hole and round shank five-hole electric rotary hammer drills. It can be used with SDS PLUS and SDS MAX tools of all major manufacturers (for Bosch, DeWalt, Hiltex, Makita, Goplus, etc.) to make your hammer drill more useful.
  • This Set Includes: 11PCS, including 5 diameters of hole saws (30 mm or 1.18 in., 40 mm or 1.57 in., 65 mm or 2.56 in., 80 mm or 3.15 in., 100 mm or 3.94 in.) , a 300mm(11.8in.) SDS PLUS shank, a 300mm(11.8in.) SDS MAX shank, 4pc pilot drill bits(114mm or 4.48 in.), and 2pc screws. All are packed in aluminum plastic boxes, durable and easy to carry.

More Info

1