High rated Radiused Corner End Mills. Reviews July, 2021, page 1

Accusize Industrial Tools 1/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 5/8'' Cutter Dia, 3'' Overall Length, 1011-0018

More from Tools & Home Improvement
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 1/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 5/8'' Cutter Dia, 3'' Overall Length, 1011-0018

Current price: 12.8 USD


Check price and availability


Height: 1.18 Inches

Length: 4.33 Inches

Width: 1.18 Inches

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"

More Info

CGC Tools GMANR34R30904.250 Gorilla Silverback Radiused Corner End Mill, Carbide, for Aluminum, Neck Relieved, 3 Flute, 3/4" Diameter, 1" LOC, 4-1/4" NR, 7" OAL, 0.090" Radius

More from Tools & Home Improvement
Search only CGC Tools brand name
CGC Tools GMANR34R30904.250 Gorilla Silverback Radiused Corner End Mill, Carbide, for Aluminum, Neck Relieved, 3 Flute, 3/4

Current price: 84.78 USD


Check price and availability


Weight: 1.2 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius

More Info

KEHAOU CNC Tools Carbide Radiused Corner End Mill, HRC45 with TiSIN Coated, 4 Flutes, 6mm Diameter, 3/4" Cutting length, 2'' Overall Length

More from Tools & Home Improvement
Search only KEHAOU brand name
KEHAOU CNC Tools Carbide Radiused Corner End Mill, HRC45 with TiSIN Coated, 4 Flutes, 6mm Diameter, 3/4

Current price: 8.69 USD


Check price and availability


  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;

More Info

CGC Tools CEM516R2020TIN Primate Radiused Corner End Mill, TiN Coating, 2 Flute, 5/16" Diameter, 7/8" LOC, 2-1/2" OAL, 0.02" Radius

More from Tools & Home Improvement
Search only CGC Tools brand name
CGC Tools CEM516R2020TIN Primate Radiused Corner End Mill, TiN Coating, 2 Flute, 5/16

Current price: 8.69 USD


Check price and availability


Weight: 0.1 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable

More Info

Razor Tool 1/2” Dia 4 Flute Carbide End Mill 1.25” Length of Cut, Corner Radius .030”

More from Tools & Home Improvement
Search only Razor Tool brand name
Razor Tool 1/2” Dia 4 Flute Carbide End Mill 1.25” Length of Cut, Corner Radius .030”

Current price: 40 USD


Check price and availability


  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining

More Info

CGC Tools CEM332R4010 Primate Radiused Corner End Mill, 4 Flute, 3/32" Diameter, 3/8" LOC, 1-1/2" OAL, 0.01" Radius

More from Tools & Home Improvement
Search only CGC Tools brand name
CGC Tools CEM332R4010 Primate Radiused Corner End Mill, 4 Flute, 3/32

Current price: 5.97 USD


Check price and availability


  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable

More Info

SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Design - 4 Flute - IPVR1T1/4"0.06"4 - Made in Taiwan (1 Piece, R0.06, 1/4")

More from Tools & Home Improvement
Search only SPEED TIGER brand name
SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Design - 4 Flute - IPVR1T1/4

Current price: 15.15 USD


Check price and availability


  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory
  • UNEQUAL FLUTE SPACING AND HELIX DESIGN - Anti-Vibration, Improves Chip Disposal, Prevents Burr, Excellent Surface
  • HIGH PERFORMANCE FOR HARD MATERIALS - Micro Grain Carbide that is very tough, resists wear and is good for cutting
  • DIFFERENT DIAMETER -1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Titanium

More Info

CGC Tools GMA12R2120 Gorilla Silverback Radiused Corner End Mill, Carbide, for Aluminum, 2 Flute, 1/2" Diameter, 1-1/4" LOC, 3-1/2" OAL, 0.120" Radius

More from Tools & Home Improvement
Search only CGC Tools brand name
CGC Tools GMA12R2120 Gorilla Silverback Radiused Corner End Mill, Carbide, for Aluminum, 2 Flute, 1/2

Current price: 95.34 USD


Check price and availability


Weight: 0.4 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory
  • UNEQUAL FLUTE SPACING AND HELIX DESIGN - Anti-Vibration, Improves Chip Disposal, Prevents Burr, Excellent Surface
  • HIGH PERFORMANCE FOR HARD MATERIALS - Micro Grain Carbide that is very tough, resists wear and is good for cutting
  • DIFFERENT DIAMETER -1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Titanium
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Radius, 2 Flute, 1/2" Diameter, 1-1/4" Length Of Cut, .120" Radius, 3-1/2" Overall Length

More Info

Dormer S407HA1/8 Carbide AlTiN Radiused Corner End Mill, Regular Length, Unequal Helix, 4 Flutes, 1/8" Cutting Diameter

More from Tools & Home Improvement
Search only Dormer brand name
Dormer S407HA1/8 Carbide AlTiN Radiused Corner End Mill, Regular Length, Unequal Helix, 4 Flutes, 1/8

Current price: 15.83 USD


Check price and availability


Weight: 0.05 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory
  • UNEQUAL FLUTE SPACING AND HELIX DESIGN - Anti-Vibration, Improves Chip Disposal, Prevents Burr, Excellent Surface
  • HIGH PERFORMANCE FOR HARD MATERIALS - Micro Grain Carbide that is very tough, resists wear and is good for cutting
  • DIFFERENT DIAMETER -1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Titanium
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Radius, 2 Flute, 1/2" Diameter, 1-1/4" Length Of Cut, .120" Radius, 3-1/2" Overall Length
  • Solid Carbide 4-Flute AlTiN coated End Mill
  • Regular Length, Center Cutting, Corner Radius, Unequal Helix
  • 1 piece Solid Carbide 4-Flute AlTiN coated End Mill

More Info

Dormer S407HA3/16 Carbide AlTiN Radiused Corner End Mill, Regular Length, Unequal Helix, 4 Flutes, 3/16" Cutting Diameter

More from Tools & Home Improvement
Search only Dormer brand name
Dormer S407HA3/16 Carbide AlTiN Radiused Corner End Mill, Regular Length, Unequal Helix, 4 Flutes, 3/16

Current price: 20.3 USD


Check price and availability


  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Neck Relieved, Radius, 3 Flute, 3/4 Diameter, 1.0 Length Of Cut, 4-1/4 Neck Relief, 7.0 Overall Length, .090" Radius
  • 5.CNC Cutter HRC45 Alloy Coated 4 Fluets Tungsten Steel End Mill Engraving Machine Head Milling Cutter Tool
  • 4.Material: HRC45 solide Carbide,Corner Radius end mills, 4 Flutes,1/4'' Diameter, 3/4'' Length of Cut,2'' Overall Length
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 ℃ or higher;
  • 1, TISIN coated, suitable for a variety of cutting environment;
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Premium Micrograin Polished Carbide
  • Corner radius to protect corner from breakage during roughing
  • Made In USA
  • AlTiN coating for wear resistance in tough materials
  • Variable index/helix for vibration free machining
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory
  • UNEQUAL FLUTE SPACING AND HELIX DESIGN - Anti-Vibration, Improves Chip Disposal, Prevents Burr, Excellent Surface
  • HIGH PERFORMANCE FOR HARD MATERIALS - Micro Grain Carbide that is very tough, resists wear and is good for cutting
  • DIFFERENT DIAMETER -1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Titanium
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Engineered to repel aluminum; For roughing and finishing of non-ferrous materials, High velocity, high material removal rate
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Silverback, Radius, 2 Flute, 1/2" Diameter, 1-1/4" Length Of Cut, .120" Radius, 3-1/2" Overall Length
  • Solid Carbide 4-Flute AlTiN coated End Mill
  • Regular Length, Center Cutting, Corner Radius, Unequal Helix
  • 1 piece Solid Carbide 4-Flute AlTiN coated End Mill
  • Solid Carbide 4-Flute AlTiN coated End Mill
  • Regular Length, Center Cutting, Corner Radius, Unequal Helix
  • 1 piece Solid Carbide 4-Flute AlTiN coated End Mill

More Info

1    2    3    4    5    6    7    8    9    10