Best Radiused Corner End Mills. Accusize-Industrial-Tools brand. New releases 2021

Accusize Industrial Tools 1/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 5/8'' Cutter Dia, 3'' Overall Length, 1011-0018

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 1/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 5/8'' Cutter Dia, 3'' Overall Length, 1011-0018

Current price: 12.8 USD


Check price and availability


Height: 1.18 Inches

Length: 4.33 Inches

Width: 1.18 Inches

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"

More Info

Accusize Industrial Tools Stadard Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' by 1/2'' by 1-1/4'' Flt Length, 1102-0012

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools Stadard Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' by 1/2'' by 1-1/4'' Flt Length, 1102-0012

Current price: 20.8 USD


Check price and availability


Height: 1.181102361 Inches

Length: 0.787401574 Inches

Width: 2.755905509 Inches

Weight: 1.1 Kilograms

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth

More Info

Accusize Industrial Tools H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008

Current price: 128 USD


Check price and availability


Height: 5.905511805 Inches

Length: 4.330708657 Inches

Width: 2.362204722 Inches

Weight: 1.5 Kilograms

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners

More Info

Accusize Industrial Tools 3 Pc Little Hogger End Mill Set, 45 Deg, 90 Deg and 3/16r Mill with 3/4'' Shank, 1'' Head, 0046-0700

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 3 Pc Little Hogger End Mill Set, 45 Deg, 90 Deg and 3/16r Mill with 3/4'' Shank, 1'' Head, 0046-0700

Current price: 76 USD


Check price and availability


Height: 10.236220462 Inches

Length: 2.755905509 Inches

Width: 7.086614166 Inches

Weight: 1.984160358 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron

More Info

Accusize Industrial Tools Indexable End Mill with 3 Pcs Tpg32 Carbide Inserts, 2'' Cutting Diameter, 3/4'' Straight Shank, 0046-0914

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools Indexable End Mill with 3 Pcs Tpg32 Carbide Inserts, 2'' Cutting Diameter, 3/4'' Straight Shank, 0046-0914

Current price: 68 USD


Check price and availability


Height: 10.236220462 Inches

Length: 2.362204722 Inches

Width: 10.236220462 Inches

Weight: 0.6 Kilograms

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''

More Info

Accusize Industrial Tools 3 Pc Miniature Indexable End Mill Set, 1/2'' Shank, 0046-0510

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 3 Pc Miniature Indexable End Mill Set, 1/2'' Shank, 0046-0510

Current price: 52.8 USD


Check price and availability


Height: 5.905511805 Inches

Length: 5.905511805 Inches

Width: 1.968503935 Inches

Weight: 0.992080179 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''
  • Comes with inserts installed
  • Use standard TPG22 insert
  • Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert
  • 3'' Overall length
  • 1/2" Shank

More Info

Accusize Industrial Tools 3 Pc 90 Degree Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 3/8'', 1/2'' and 5/8'', 0028-8308

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 3 Pc 90 Degree Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 3/8'', 1/2'' and 5/8'', 0028-8308

Current price: 148 USD


Check price and availability


Height: 1.3779527545 Inches

Length: 5.118110231 Inches

Width: 4.9212598375 Inches

Weight: 0.4 Kilograms

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''
  • Comes with inserts installed
  • Use standard TPG22 insert
  • Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert
  • 3'' Overall length
  • 1/2" Shank
  • with 8 ps additional screws + 1 Torx Wrench. Uses APKT / APHW / APKR_APht / APMT insert (sold separately)
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
  • Radial rake angle: -10Degree. Axial rake angle: +7Degree.
  • 3/8", 1/2", & 5/8", 90Degree Cutting angle. Nickel Plated. Screw down insert

More Info

Accusize Industrial Tools 7/8'' 4 Flute, 7/8 by 3/4 by 1-5/8 by 4-1/8'' M42-8% Cobalt Roughing End Mill, Center Cutting, 1002-0078

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 7/8'' 4 Flute, 7/8 by 3/4 by 1-5/8 by 4-1/8'' M42-8% Cobalt Roughing End Mill, Center Cutting, 1002-0078

Current price: 40.8 USD


Check price and availability


Height: 0.79 Inches

Length: 0.79 Inches

Width: 3.94 Inches

Weight: 0.22 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''
  • Comes with inserts installed
  • Use standard TPG22 insert
  • Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert
  • 3'' Overall length
  • 1/2" Shank
  • with 8 ps additional screws + 1 Torx Wrench. Uses APKT / APHW / APKR_APht / APMT insert (sold separately)
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
  • Radial rake angle: -10Degree. Axial rake angle: +7Degree.
  • 3/8", 1/2", & 5/8", 90Degree Cutting angle. Nickel Plated. Screw down insert
  • Standard Tooth
  • Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Center cutting
  • M42-8% Premium cobalt
  • Dia.: 7/8"; Shank Dia.: 3/4"; ute length: 1-5/8"; verall length: 4-1/8"

More Info

Accusize Industrial Tools 1/2'' Fine Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' Shk Dia, 2'' Flute Length, 4'' Oal, 4 Flute, 1104-0120

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 1/2'' Fine Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' Shk Dia, 2'' Flute Length, 4'' Oal, 4 Flute, 1104-0120

Current price: 28.8 USD


Check price and availability


Height: 5.118110231 Inches

Length: 1.181102361 Inches

Width: 1.181102361 Inches

Weight: 0.881849048 Pounds

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''
  • Comes with inserts installed
  • Use standard TPG22 insert
  • Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert
  • 3'' Overall length
  • 1/2" Shank
  • with 8 ps additional screws + 1 Torx Wrench. Uses APKT / APHW / APKR_APht / APMT insert (sold separately)
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
  • Radial rake angle: -10Degree. Axial rake angle: +7Degree.
  • 3/8", 1/2", & 5/8", 90Degree Cutting angle. Nickel Plated. Screw down insert
  • Standard Tooth
  • Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Center cutting
  • M42-8% Premium cobalt
  • Dia.: 7/8"; Shank Dia.: 3/4"; ute length: 1-5/8"; verall length: 4-1/8"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant
  • Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials
  • 4 Flute, Fine Tooth. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • Diameter: 1/2''. Shank Diameter: 1/2''. Flute length: 2''. Overall Length: 4''
  • TiAlN coating. Center cutting. M42-8% Premium cobalt. Flutes ground by a world-class IS-9002 Factory.

More Info

Accusize Industrial Tools 3'' Carbide Indexable End Mill, R8 Shank, 5 Flute, with Tpg322 Inserts, 0046-0917

More from Industrial & Scientific
Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 3'' Carbide Indexable End Mill, R8 Shank, 5 Flute, with Tpg322 Inserts, 0046-0917

Current price: 126.4 USD


Check price and availability


Height: 4.724409444 Inches

Length: 9.842519675 Inches

Width: 4.724409444 Inches

Weight: 2.95 Kilograms

  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 1/8", Shank dia.: 1/2", Largest dia.: 5/8", Overall length: 3"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Diameter: 1/2'', Shank Diameter: 1/2'', Flute length: 1-1/4'', Overall Length: 3-1/4'', 4 Flute, Coarse Tooth
  • 7/16" to 1-1/4"
  • Suitable for a wide range of ferrous and nonferrous materials
  • Right hand cut. Formed radius cutter.
  • Form-relieved type; can be sharpened repeatedly without changing the form.
  • Intended for use in milling rounded corners
  • Replacement inserts can be found on Amazon. SKU: 0046-0701
  • 1'' Dia Head, 3/4''Shank
  • 1 each 45Degree, 90Degree & 3/16R mills; Inserts: TNMA322, SNAM322 and RANMA322.
  • Shank Diameter Tolerance -0.0005"/+0.0000"( -0.013mm / +0.000mm); Cutting flute diameter tolerance: -0.012"/+0.012" ( -0.3mm/+0.3mm)
  • Comes with quality carbide inserts; Mills steels & cast iron
  • 3/4'' straight shank
  • Positive rake 90Degree, right hand cut. TPG32
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End mills, 3/4'' straight shank, 2''
  • Comes with inserts installed
  • Use standard TPG22 insert
  • Each set contains 1 each of 1/2'', 9/16'' & 5/8'' cutter with insert
  • 3'' Overall length
  • 1/2" Shank
  • with 8 ps additional screws + 1 Torx Wrench. Uses APKT / APHW / APKR_APht / APMT insert (sold separately)
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
  • Radial rake angle: -10Degree. Axial rake angle: +7Degree.
  • 3/8", 1/2", & 5/8", 90Degree Cutting angle. Nickel Plated. Screw down insert
  • Standard Tooth
  • Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • Center cutting
  • M42-8% Premium cobalt
  • Dia.: 7/8"; Shank Dia.: 3/4"; ute length: 1-5/8"; verall length: 4-1/8"
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant
  • Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials
  • 4 Flute, Fine Tooth. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • Diameter: 1/2''. Shank Diameter: 1/2''. Flute length: 2''. Overall Length: 4''
  • TiAlN coating. Center cutting. M42-8% Premium cobalt. Flutes ground by a world-class IS-9002 Factory.
  • Positive rake 90° right hand cut
  • Uses standard triangular inserts
  • Comes with inserts installed
  • Carbide Indexable End Mills, R8 Shank, 3'' TPG32

More Info

1    2