Best Push Nuts. Reviews June, 2021

(8 Pack) Hard-to-Find Spring Steel Push-On Pushnuts - Dolly Wheel Lock Washers Fits 5/8" Dolly Axle Rods with Oiled Phosphate Finish

Search only AR-PRO brand name
(8 Pack) Hard-to-Find Spring Steel Push-On Pushnuts - Dolly Wheel Lock Washers Fits 5/8

Current price: 9.99 USD

Saving: $2.00 (17%)


Check price and availability


Height: 0.98425 Inches

Length: 0.00098425 Inches

Width: 0.00098425 Inches

Weight: 0.00220462262 Pounds

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.

More Info

Push-On Pushnut, Stud Size 5/8, Phosphate + Oil, 2-Piece

Search only Just in Time brand name
Push-On Pushnut, Stud Size 5/8, Phosphate + Oil, 2-Piece

Current price: 4.59 USD

Saving: $1.40 (23%)


Check price and availability


  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques

More Info

Push on Pushnut Cap Stud Size 5/8, Zinc Mech Finish, 2-Piece

Search only Just in Time brand name
Push on Pushnut Cap Stud Size 5/8, Zinc Mech Finish, 2-Piece

Current price: 5.3 USD

Saving: $1.17 (18%)


Check price and availability


Height: 0.41 Inches

Length: 1.19 Inches

Width: 1.19 Inches

Weight: 0.01 Pounds

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut

More Info

Hard-to-Find Fastener 014973222420 Washer Cap Push Nuts, 1/2, Piece-12

Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973222420 Washer Cap Push Nuts, 1/2, Piece-12

Current price: 9.35 USD


Check price and availability


Weight: 0.11 Pounds

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"

More Info

Push-On Pushnut, Stud Size 5/16 inch, 5-Piece

Search only Just in Time brand name
Push-On Pushnut, Stud Size 5/16 inch, 5-Piece

Current price: 5.25 USD

Saving: $1.04 (17%)


Check price and availability


  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.

More Info

The Hillman Group The Hillman Group 887 Axle Pushnut Fastener 3/8 in. 20-Pack

Search only The Hillman Group brand name
The Hillman Group The Hillman Group 887 Axle Pushnut Fastener 3/8 in. 20-Pack

Current price: 8.99 USD


Check price and availability


Height: 2.5 Inches

Length: 1.4 Inches

Width: 1.6 Inches

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.
  • Package Dimensions : 1.4" L x 1.6" W x 2.5" H
  • Included parts are zinc-plated for improved corrosion resistance
  • Push nuts are designed to offer simple, tool-free, push-in installation
  • Push nuts are designed for permanent placement without the use of specific removal tools

More Info

Hard-to-Find Fastener 014973325787 Washer Cap Push Nuts, 5/8, Piece-8

Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973325787 Washer Cap Push Nuts, 5/8, Piece-8

Current price: 10.77 USD


Check price and availability


  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.
  • Package Dimensions : 1.4" L x 1.6" W x 2.5" H
  • Included parts are zinc-plated for improved corrosion resistance
  • Push nuts are designed to offer simple, tool-free, push-in installation
  • Push nuts are designed for permanent placement without the use of specific removal tools
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 5/8"

More Info

John Deere Original Equipment Push Nut #H141123

Search only John Deere brand name
John Deere Original Equipment Push Nut #H141123

Current price: 4.24 USD


Check price and availability


Height: 1 Inches

Length: 10 Inches

Width: 6 Inches

Weight: 1 Pounds

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.
  • Package Dimensions : 1.4" L x 1.6" W x 2.5" H
  • Included parts are zinc-plated for improved corrosion resistance
  • Push nuts are designed to offer simple, tool-free, push-in installation
  • Push nuts are designed for permanent placement without the use of specific removal tools
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 5/8"
  • Fits: X300, X304, X310, X320, X324, X350, X354, X360, X370, X380, X384, X390, X394, X495, X500, X520, X530, X534, X540, X570, X580, X584, X590, X595, X700, X710, X730, X734, X738, X739, X740, X748,
  • Fits: 1023, 1025, 1026, 180, 2025, 2027, 2032, 220, 2305, 2500, 260, 3033, 3038, 3039, 3045, 3046, 325, 335, 345, 355, 4044, 4049, 4052, 4066, 647, 657, 717, 727, 737, 7400, 757, 777, 797, 997, G100,
  • OEM John Deere Part Number: H141123

More Info

Prime-Line 9078486 Axle Hat Push Nuts, 1/4 in., Zinc Plated Steel, 20-Pack

Search only PRIME-LINE brand name
Prime-Line 9078486 Axle Hat Push Nuts, 1/4 in., Zinc Plated Steel, 20-Pack

Current price: 7.53 USD


Check price and availability


Height: 1 Inches

Length: 4 Inches

Width: 4 Inches

  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.
  • Package Dimensions : 1.4" L x 1.6" W x 2.5" H
  • Included parts are zinc-plated for improved corrosion resistance
  • Push nuts are designed to offer simple, tool-free, push-in installation
  • Push nuts are designed for permanent placement without the use of specific removal tools
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 5/8"
  • Fits: X300, X304, X310, X320, X324, X350, X354, X360, X370, X380, X384, X390, X394, X495, X500, X520, X530, X534, X540, X570, X580, X584, X590, X595, X700, X710, X730, X734, X738, X739, X740, X748,
  • Fits: 1023, 1025, 1026, 180, 2025, 2027, 2032, 220, 2305, 2500, 260, 3033, 3038, 3039, 3045, 3046, 325, 335, 345, 355, 4044, 4049, 4052, 4066, 647, 657, 717, 727, 737, 7400, 757, 777, 797, 997, G100,
  • OEM John Deere Part Number: H141123
  • Often used to hold wheels on hand trucks and other equipment
  • Contact points on the inside of the nut bite into the shaft to secure it in place
  • Can be tapped into place using a hammer or mallet
  • Used to cap axles and exposed ends of rods, shafts or studs
  • Size: 1/4 inch

More Info

PSCCO 10PCS Push-On Pushnut-Dense Type, M8

Search only PSCCO brand name
PSCCO 10PCS Push-On Pushnut-Dense Type, M8

Current price: 5.99 USD


Check price and availability


  • BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
  • OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
  • DOLLY WHEEL LOCK WASHERS FITS 5/8" DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
  • PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
  • HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
  • Thickness: .02"
  • OD : 1"
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • No Screw Thread
  • Zinc Mechanical .0003 Minimum Finish
  • 2-piece
  • 5/8 in. Stud Size
  • Washer Cap/Axle Nut
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 1/2"
  • Zinc Finish.
  • Used on 5/16 in. Shafts.
  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques.
  • Package Dimensions : 1.4" L x 1.6" W x 2.5" H
  • Included parts are zinc-plated for improved corrosion resistance
  • Push nuts are designed to offer simple, tool-free, push-in installation
  • Push nuts are designed for permanent placement without the use of specific removal tools
  • Type: Push Nut
  • Style: Washer Cap
  • Finish: Zinc
  • Material: Steel
  • Diameter: 5/8"
  • Fits: X300, X304, X310, X320, X324, X350, X354, X360, X370, X380, X384, X390, X394, X495, X500, X520, X530, X534, X540, X570, X580, X584, X590, X595, X700, X710, X730, X734, X738, X739, X740, X748,
  • Fits: 1023, 1025, 1026, 180, 2025, 2027, 2032, 220, 2305, 2500, 260, 3033, 3038, 3039, 3045, 3046, 325, 335, 345, 355, 4044, 4049, 4052, 4066, 647, 657, 717, 727, 737, 7400, 757, 777, 797, 997, G100,
  • OEM John Deere Part Number: H141123
  • Often used to hold wheels on hand trucks and other equipment
  • Contact points on the inside of the nut bite into the shaft to secure it in place
  • Can be tapped into place using a hammer or mallet
  • Used to cap axles and exposed ends of rods, shafts or studs
  • Size: 1/4 inch
  • The lock washer exerts an elastic force between the head of the fastener and the base material to generate greater friction and rotation resistance.
  • 5/8 inch shaft. Phosphate oil coating to provide additional corrosion protection.
  • Provide elasticity, firm grip, can be permanently fixed, widely used in mechanical equipment, industrial production of shock absorption and insulation.
  • Replace traditional hex nuts to reduce weight or use in applications requiring lower torque.
  • Material: Meng Steel. Surface treatment: black oxide.

More Info

1    2    3    4    5    6    7    8    9    10