Best Punches. brand. New releases 2021

9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft (9-Pieces)

More from Digital Music
Search only HORUSDY brand name
9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft (9-Pieces)

Current price: 12.99 USD


Check price and availability


Height: 0.4 Inches

Length: 7 Inches

Width: 7 Inches

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.

More Info

Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

More from Digital Music
Search only Astro Pneumatic Tool brand name
Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

Current price: 25.75 USD

Saving: $3.18 (11%)


Check price and availability


Height: 1.1 Inches

Length: 9 Inches

Width: 9.7 Inches

Weight: 1 Pounds

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch

More Info

HORUSDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

More from Digital Music
Search only HORUSDY brand name
HORUSDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

Current price: 22.99 USD


Check price and availability


Height: 2.4 Inches

Length: 9.4 Inches

Width: 2.4 Inches

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.

More Info

Mayhew Tools 62215 Center Punch Kit, 4-Piece

More from Digital Music
Search only Mayhew Tools brand name
Mayhew Tools 62215 Center Punch Kit, 4-Piece

Current price: 16.08 USD


Check price and availability


Height: 1 Inches

Length: 6 Inches

Width: 4 Inches

Warranty: 2-Year Limited Warranty

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials

More Info

Starrett Drive Pin Punch Set, S565WB, 8 Pieces - 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" Diameters and 4 Inch Length, Made of Hardened Steel Metal, Comes in Plastic Storage Case

More from Digital Music
Search only Starrett brand name
Starrett Drive Pin Punch Set, S565WB, 8 Pieces - 1/16

Current price: 61 USD


Check price and availability


Height: 2.5 Inches

Length: 4.5 Inches

Width: 2.5 Inches

Weight: 0.3 Pounds

Warranty: 1 year

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer

More Info

TEKTON Pin Punch Set, 9-Piece (1/16-3/8 in.) | PNC92001

More from Digital Music
Search only TEKTON brand name
TEKTON Pin Punch Set, 9-Piece (1/16-3/8 in.) | PNC92001

Current price: 28 USD


Check price and availability


Height: 0.5 Inches

Length: 8.5 Inches

Width: 3.7 Inches

Weight: 1.43 Pounds

Warranty: No time limits, no receipts: tekton.com/tool-help

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer
  • Made in USA
  • Classic natural finish has a dry-touch, rust-preventative coating
  • Individual heat treatment allows careful control of tip hardness and temper of striking end
  • Straight and true, tip is precisely machined to meet exacting tolerances
  • Made from premium, high carbon steel
  • Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
  • Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.

More Info

Starrett 18A Automatic Center Punch with Hardened Steel Metal, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force, No. 4 Graduation

More from Digital Music
Search only Starrett brand name
Starrett 18A Automatic Center Punch with Hardened Steel Metal, Universal Tool for Machinists and Carpenters with Adjustable Knurled Cap to Control Blow Force, No. 4 Graduation

Current price: 36 USD


Check price and availability


Height: 5.5 Inches

Length: 1 Inches

Width: 1.1 Inches

Weight: 0.1984160358 Pounds

Warranty: One Year on defects in material and workmanship

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer
  • Made in USA
  • Classic natural finish has a dry-touch, rust-preventative coating
  • Individual heat treatment allows careful control of tip hardness and temper of striking end
  • Straight and true, tip is precisely machined to meet exacting tolerances
  • Made from premium, high carbon steel
  • Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
  • Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
  • REMOVABLE POINT: The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools
  • ADJUSTABLE FORCE: For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting
  • NO HAMMER NEEDED: This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work
  • STEEL CONSTRUCTION: This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow
  • PRE-DRILLING TOOL: The 18A Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping

More Info

One-Punch Man, Vol. 15 (15)

More from Digital Music
Search only VIZ Media LLC brand name
One-Punch Man, Vol. 15 (15)

Current price: 8.99 USD

Saving: $1.00 (10%)


Check price and availability


Height: 7.5 Inches

Length: 5 Inches

Width: 0.6 Inches

Weight: 0.44974301448 Pounds

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer
  • Made in USA
  • Classic natural finish has a dry-touch, rust-preventative coating
  • Individual heat treatment allows careful control of tip hardness and temper of striking end
  • Straight and true, tip is precisely machined to meet exacting tolerances
  • Made from premium, high carbon steel
  • Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
  • Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
  • REMOVABLE POINT: The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools
  • ADJUSTABLE FORCE: For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting
  • NO HAMMER NEEDED: This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work
  • STEEL CONSTRUCTION: This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow
  • PRE-DRILLING TOOL: The 18A Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping

More Info

Fire Punch, Vol. 4

More from Digital Music
Search only brand name
Fire Punch, Vol. 4

Current price: 7.99 USD


Check price and availability


  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer
  • Made in USA
  • Classic natural finish has a dry-touch, rust-preventative coating
  • Individual heat treatment allows careful control of tip hardness and temper of striking end
  • Straight and true, tip is precisely machined to meet exacting tolerances
  • Made from premium, high carbon steel
  • Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
  • Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
  • REMOVABLE POINT: The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools
  • ADJUSTABLE FORCE: For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting
  • NO HAMMER NEEDED: This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work
  • STEEL CONSTRUCTION: This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow
  • PRE-DRILLING TOOL: The 18A Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping

More Info

And Justice For None

More from Digital Music
Search only Prospect Park brand name
And Justice For None

Current price: 11.99 USD


Check price and availability


Height: 0.5 Inches

Length: 5 Inches

Width: 5.5 Inches

Weight: 0.2 Pounds

  • 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
  • Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
  • 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
  • Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
  • The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
  • Center Punch: 1/8-Inch By 5-Inch, 3/16-Inch By 6-Inch
  • Pin Punch: 3/32-Inch By 4-1/4-Inch, 1/8-Inch By 4-3/4-Inch, 5/32-Inch By 5-Inch, 3/16-Inch By 5-1/4-Inch, 1/4-Inch By 5-3/4-Inch
  • Cold Chisels: 3/8-Inch By 5-1/2-Inch, 1/2-Inch By 6-Inch, 5/8-Inch By 6-1/2-Inch
  • Taper Punch: 3/32-Inch By 5-1/4-Inch, 1/8-Inch By 5-3/4-Inch, 5/32-Inch By 6-Inch, 3/16-Inch By 6-1/4-Inch, 1/4-Inch By 6-3/4-Inch
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
  • Includes: 24002 3/16-5mm x 5-Inch, 24003 5/16-8mm x 6-Inch, 24006 5/64-2mm x 4-Inch, 24007 1/8-3mm x 4-1/4-Inch
  • Black oxide finish for additional rust protection
  • Point sizes vary to achieve the most appropriate hole size
  • Used for piercing, or marking for starting drills, in metal and other materials
  • STORAGE CASE INCLUDED: This center pouch set comes with a convenient, red plastic storage case for keeping your pin punches organized Each punch has its size stamped on the head
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control As an added precaution, always wear safety goggles when using striking tools
  • STEEL CONSTRUCTION: These pin punches are made of hardened steel for wear resistance and strength. Its tempered head makes it less likely to fracture from a hard, off-center blow
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes
  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer
  • Made in USA
  • Classic natural finish has a dry-touch, rust-preventative coating
  • Individual heat treatment allows careful control of tip hardness and temper of striking end
  • Straight and true, tip is precisely machined to meet exacting tolerances
  • Made from premium, high carbon steel
  • Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
  • Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
  • REMOVABLE POINT: The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools
  • ADJUSTABLE FORCE: For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting
  • NO HAMMER NEEDED: This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work
  • STEEL CONSTRUCTION: This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow
  • PRE-DRILLING TOOL: The 18A Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping
  • Shrink-wrapped

More Info

1    2    3    4    5    6    7    8    9    10