Affordable Powder Actuated Tools. Reviews July, 2021, page 6

8' Fiberglass Extension Pole For Ramset Cobra PLUS (Newest Model) ~ LS-8-RCP

More from Tools & Home Improvement
Search only DOC'S brand name
8' Fiberglass Extension Pole For Ramset Cobra PLUS (Newest Model) ~ LS-8-RCP

Current price: 379 USD


Check price and availability


  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction

More Info

0.22 Caliber Purple Single Shot Powder Loads, High Velocity Strong Power Fasteners Power Loads (100-Count) (Level 6)

More from Tools & Home Improvement
Search only Alla Lighting brand name
0.22 Caliber Purple Single Shot Powder Loads, High Velocity Strong Power Fasteners Power Loads (100-Count) (Level 6)

Current price: 11.99 USD


Check price and availability


  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.

More Info

Platinum Tools JH930 -100 Jh930-100 Rt Angle Clip, 1/4-20 with Powder Actuated Nail, 100 Per Box

More from Tools & Home Improvement
Search only Platinum Tools brand name
Platinum Tools JH930 -100 Jh930-100 Rt Angle Clip, 1/4-20 with Powder Actuated Nail, 100 Per Box

Current price: 86.52 USD


Check price and availability


Height: 1 Inches

Length: 6 Inches

Width: 2 Inches

Weight: 6.4 Pounds

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction

More Info

Hilti 274638 GX120 Gas Actuated Fully Automatic Fastening Nail Gun Package

More from Tools & Home Improvement
Search only HILTI brand name
Hilti 274638 GX120 Gas Actuated Fully Automatic Fastening Nail Gun Package

Current price: 1386.82 USD


Check price and availability


Height: 15.4 Inches

Length: 17 Inches

Width: 5.3 Inches

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can

More Info

The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

More from Tools & Home Improvement
Search only Oneida Air Systems brand name
The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

Current price: 109.59 USD


Check price and availability


Height: 29.25 Inches

Length: 12 Inches

Width: 12 Inches

Weight: 10.2 Pounds

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!

More Info

Zenith Industries ZN700001 Trim Puller , Black

More from Tools & Home Improvement
Search only Zenith Industries brand name
Zenith Industries ZN700001 Trim Puller , Black

Current price: 29.95 USD


Check price and availability


Height: 10.8 Inches

Length: 3.7 Inches

Width: 3.9 Inches

Weight: 1.2 Pounds

Warranty: Limited 1 year warranty

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
  • REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
  • IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!

More Info

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

More from Tools & Home Improvement
Search only Craftsman brand name
CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

Current price: 170.7 USD

Saving: $48.30 (22%)


Check price and availability


Height: 11.49 Inches

Length: 13.37 Inches

Width: 4.49 Inches

Weight: 7.64 Pounds

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
  • REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
  • IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
  • CONVENIENCE: Belt hook for added access and storage
  • DDED COMFORT: Contoured over-molded handle
  • OPTIMAL BALANCE: Lightweight with optimal center of gravity providing optimal balance and comfort in hand during use
  • IMPROVED EFFICIENCY: Tool-free jam and stall settings for ease of use
  • CONSISTENT RESULTS: Tool-free depth settings for quick set up
  • CLIMATE CONDITIONS: Provides consistent firing power in various climate conditions and materials
  • ELIMINATES THE NEED: Fully cordless design eliminates the need for compressors, hoses or costly gas cartridges
  • Drives adhesive collated 18 GA finish nails with this cordless finish nailer

More Info

0.27 Caliber Yellow Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

More from Tools & Home Improvement
Search only Alla Lighting brand name
0.27 Caliber Yellow Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

Current price: 11.99 USD


Check price and availability


  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
  • REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
  • IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
  • CONVENIENCE: Belt hook for added access and storage
  • DDED COMFORT: Contoured over-molded handle
  • OPTIMAL BALANCE: Lightweight with optimal center of gravity providing optimal balance and comfort in hand during use
  • IMPROVED EFFICIENCY: Tool-free jam and stall settings for ease of use
  • CONSISTENT RESULTS: Tool-free depth settings for quick set up
  • CLIMATE CONDITIONS: Provides consistent firing power in various climate conditions and materials
  • ELIMINATES THE NEED: Fully cordless design eliminates the need for compressors, hoses or costly gas cartridges
  • Drives adhesive collated 18 GA finish nails with this cordless finish nailer
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100 power loads per box
  • Color: Yellow strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • Help to provide the power to penetrate hollow block and concrete
  • Use with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 yellow strips: each strip contains 10 pieces powder loads.

More Info

AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

More from Tools & Home Improvement
Search only AOBEN brand name
AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

Current price: 115.79 USD

Saving: $44.20 (28%)


Check price and availability


  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
  • REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
  • IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
  • CONVENIENCE: Belt hook for added access and storage
  • DDED COMFORT: Contoured over-molded handle
  • OPTIMAL BALANCE: Lightweight with optimal center of gravity providing optimal balance and comfort in hand during use
  • IMPROVED EFFICIENCY: Tool-free jam and stall settings for ease of use
  • CONSISTENT RESULTS: Tool-free depth settings for quick set up
  • CLIMATE CONDITIONS: Provides consistent firing power in various climate conditions and materials
  • ELIMINATES THE NEED: Fully cordless design eliminates the need for compressors, hoses or costly gas cartridges
  • Drives adhesive collated 18 GA finish nails with this cordless finish nailer
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100 power loads per box
  • Color: Yellow strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • Help to provide the power to penetrate hollow block and concrete
  • Use with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 yellow strips: each strip contains 10 pieces powder loads.
  • 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service.
  • 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush and an extra chuck, fit drill bits size from 1mm to 13mm. Portable Carrying Case provides the perfect storage.
  • 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
  • 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button.
  • 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.

More Info

ShelterLogic 10' x 20' x 8' All-Steel Metal Frame Peak Style Roof Instant Garage and AutoShelter with Waterproof and UV-Treated Ripstop Cover

More from Tools & Home Improvement
Search only ShelterLogic brand name
ShelterLogic 10' x 20' x 8' All-Steel Metal Frame Peak Style Roof Instant Garage and AutoShelter with Waterproof and UV-Treated Ripstop Cover

Current price: 349 USD

Saving: $89.00 (20%)


Check price and availability


Height: 98.2 Inches

Length: 237.97 Inches

Width: 117.45 Inches

Weight: 132.2773572 Pounds

Warranty: 1 year limited

  • Time and cost efficient. Made In USA
  • Increases safety by keeping your employees on the ground
  • Heat treated aluminum casting
  • Dielectric, meets OSHA’s standards
  • Sturdy light weight fiberglass construction
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100-loads per box
  • Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
  • Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.
  • Accommodates jack chain, ceiling wire or threaded rod
  • Threaded and non-threaded holes
  • High quality all steel construction
  • Voltage: 110.0
  • Includes tool, 1 GX 120 nail punch set and z case
  • Fastener length range 9/16 to 1-9/16 inch; Uses fastener types X-EGN, X-GHP, X-GN
  • Drives 750 fasteners with a single gas can
  • US Pat. 6833016, RE40048, 7282074
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
  • REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
  • IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
  • CONVENIENCE: Belt hook for added access and storage
  • DDED COMFORT: Contoured over-molded handle
  • OPTIMAL BALANCE: Lightweight with optimal center of gravity providing optimal balance and comfort in hand during use
  • IMPROVED EFFICIENCY: Tool-free jam and stall settings for ease of use
  • CONSISTENT RESULTS: Tool-free depth settings for quick set up
  • CLIMATE CONDITIONS: Provides consistent firing power in various climate conditions and materials
  • ELIMINATES THE NEED: Fully cordless design eliminates the need for compressors, hoses or costly gas cartridges
  • Drives adhesive collated 18 GA finish nails with this cordless finish nailer
  • Compatible with most other PAT brands; Complete burn keeps the tool clean
  • High quality powder loads, Includes 100 power loads per box
  • Color: Yellow strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
  • Help to provide the power to penetrate hollow block and concrete
  • Use with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 yellow strips: each strip contains 10 pieces powder loads.
  • 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service.
  • 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush and an extra chuck, fit drill bits size from 1mm to 13mm. Portable Carrying Case provides the perfect storage.
  • 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
  • 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button.
  • 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.
  • ASSEMBLED DIMENSIONS AND WARRANTY: Exterior- 10' x 20' x 8' Interior- 9'7" x 19'7" x 8' 1 year limited warranty
  • ASSEMBLY: ShelterLogic recommends 2 people for this project and approximately 6 hours of time set aside to complete
  • EASY SLIDE CROSS RAIL SYSTEM: Locks down and squares up frames for initial and continuous frame to fabric fit
  • RATCHET-TITE Cover tensioning system ensures a drum tight cover that keeps it tight and neat looking
  • SHELTERLOCK: Patented ShelterLock stabilizers ensure rock solid stability that delivers a stable, more durable shelter
  • WATERPROOF COVERAGE: Sandstone cover is durable and made from an advanced triple-layer ripstop that is waterproof and UV-treated to resist fading
  • MADE TO LAST: Bonded with a premium powder-coated finish that prevents chipping, peeling, rust, and corrosion
  • DURABLE FRAME: Made from an all-steel metal 10 x 20 x 8-feet frame that is 1-3/8 inches thick, providing strength and stability

More Info

1    2    3    4    5    6    7    8    9    10